Gilson Vortex Mixer Bedienungsanleitung

User’s Guide

Vortex Mixer

2VORTEX MIXER | USER’S GUIDE

|VORTEX MIXER

Trademarks

All product and company names are trademarks™ or registered® trademarks of their

respective holders. Use of the trademark(s) in this document does not imply any aliation

with or endorsements by the trademark holder(s).

VORTEX MIXER | USER’S GUIDE

|VORTEX MIXER

TABLE OF CONTENTS

Introduction | 4

Speciﬁcations | 4

Installation | 5

Operation | 5

Head Removal and Replacement | 5

Ordering Information | 6

Accessories | 6

Warranty | 7

4VORTEX MIXER | USER’S GUIDE

INTRODUCTION |VORTEX MIXER

Introduction

The Vortex Mixer is a quiet, powerful, mixer designed for

vortexing micro tubes of all sizes (0.4 mL to 50 mL, and

larger). It combines dynamic balance technology with an

electronic speed control to provide smooth speed and quiet

operation with low excess vibration. This vortex mixer will

provide years of reliable service.

Speciﬁcations

VORTEX MIXER

Speed/Control User settable 200 to 3200 rpm

Operating Modes ON (continuous), OFF, and TOUCH mix

Head Standard rubber cup (Vortexer Flat head

PN 36117310)

Feet Four suction cups

Orbit 3 mm

Operating Environment 4°C to 45°C

Dimensions (WxDxH) 13 x 16 x 17 cm / 5.1 x 6.2 x 6.6 in.

Weight 3.8 kg / 8.4 lbs.

Electrical 115VAC, 60 Hz, 1.5 amps (115V model)

230VAC, 50 Hz, 0.75 amps, (230V model)

Warranty 2 years

VORTEX MIXER | USER’S GUIDE

INTRODUCTION |VORTEX MIXER

Installation

1. Place the Vortex Mixer on a clean, flat, stable surface and

press down slightly to allow the suction cup feet to adhere.

2. Make sure that the mode switch is in the OFF position and

plug the vortex mixer into a properly grounded outlet.

3. Using the speed control knob, adjust the mixing speed to

the desired setting.

4. Check that the cup head is securely fastened by gently

rotating it clockwise.

5. Start at the middle of the speed range if you are uncertain

of what setting you need.

Operation

In touch mode, the tube to be mixed is pressed downward

against the head to activate the vortex mixing action.

NOTICE

Avoid the use of solvents as they may attack the rubber cup

head or the acrylonitrile butadience styreme (ABS) plastic

housing.

Head Removal and Replacement

To change or replace the rubber head attachment, grasp the

unit body with your left hand, and then gently rotate the head

attachment counter clockwise with your right hand until the

cup head is completely unscrewed.

Replace the head attachment by gently rotating clockwise

until it is tight and you feel the rubber start to grip the top of

the dynamic drive assembly.

NOTE

Attaching accessory heads requires the use of a Phillips

screwdriver to tighten the center screw in the accessory

head.

6VORTEX MIXER | USER’S GUIDE

ORDERING INFORMATION |VORTEX MIXER

Ordering Information

PART

NUMBER DESCRIPTION

36110740 Vortex Mixer with standard cup head, 115V, US cord

36110750 Vortex Mixer with standard cup head, 230V, EU cord (3-pin

cord)

36110760 Vortex Mixer with standard cup head, 230V, UK cord

36110770 Vortex Mixer with standard cup head, 230V, AU cord

Accessories

Accessory heads are available. Please contact a Gilson Service

Center if you need one of these accessory heads.

PART

NUMBER DESCRIPTION

36117310 Vortexer Flat head

36117330

Optional Foam Rack for 12 tubes (15 mL)

For Vortex Mixer with standard cup head only

(PN 36110740)

36117340

Optional Foam Rack for 5 tubes (50 mL)

For Vortex Mixer with standard cup head only

(PN 36110740)

36117350 Horizontal head, for 12 x 1.5 mL

36117360 Horizontal head, for 4 x 15 mL

36117370 Horizontal head, for 2 x 50 mL

VORTEX MIXER | USER’S GUIDE

ORDERING INFORMATION |VORTEX MIXER

Warranty

Gilson warrants this instrument against defects in material

under normal use and service for two years from the date

of purchase. This warranty is valid only if the instrument

is used in the manner described in this guide and for the

purpose for which it is designed. Gilson is not responsible

for consequential damages resulting from the misuse or bad

cleaning or decontamination of this instrument. Enclose with

the returned instrument a description of the problem that has

occurred.

Speciﬁcations subject to change without notiﬁcation — errors excepted. Reproduction,

adaptation, or translation without prior written permission is prohibited, except as

allowed under copyright laws.

www.gilson.com/contactus

Inhaltsverzeichnis

Andere Gilson Laborausrüstung Handbücher

Gilson

Gilson MICROMAN E M25E Bedienungsanleitung

Gilson

Gilson ASPEC Bedienungsanleitung

Gilson

Gilson HM-396 Bedienungsanleitung

Gilson

Gilson MyPipetman P2 Bedienungsanleitung

Gilson

Gilson pipetman Bedienungsanleitung

Gilson

Gilson Pipetman Fixed Bedienungsanleitung

Gilson

Gilson CENTRY 103 Minicentrifuge Bedienungsanleitung

Gilson

Gilson PIPETMAX 268 Bedienungsanleitung

Gilson

Gilson ASPEC GX-274 Referenzhandbuch

Gilson

Gilson Pipetting Aid Bedienungsanleitung

Gilson

Gilson Pipetman P2G Bedienungsanleitung

Gilson

Gilson MyPIPETMAN Select Bedienungsanleitung

Gilson

Gilson Pipetman M Bedienungsanleitung

Gilson

Gilson GX-27X Series Bedienungsanleitung

Gilson

Gilson pipetman P10 Series Bedienungsanleitung

Gilson

Gilson SS-15 Bedienungsanleitung

Gilson

Gilson SGA-5R Bedienungsanleitung

Gilson

Gilson MyPipetman Bedienungsanleitung

Gilson

Gilson Power Carrousel Bedienungsanleitung

Gilson

Gilson DISTRIMAN Bedienungsanleitung

Gilson

Gilson PIPETMAN 8X200 Bedienungsanleitung

Gilson

Gilson ASPEC GX-271 Bedienungsanleitung

Gilson

Gilson Pipetman M Bedienungsanleitung

Gilson

Gilson Trackman Bedienungsanleitung

Beliebte Laborausrüstung Handbücher anderer Marken

Qiagen

Qiagen DML 3000 Bedienungsanleitung

Queensgate

Queensgate NANOSCAN OP400 Programmierhandbuch

Conviron

Conviron GEN1000-GE Bedienungsanleitung

Parr Instrument

Parr Instrument 4560 Bedienungsanleitung

IKA

IKA IC control Bedienungsanleitung

Integra

Integra DOSE IT Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5800 ICP-OES Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Bedienungsanleitung

NI PXI-5422 Handbuch

Collomix

Collomix Aqix Bedienungsanleitung

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung

Ocean Insight

Ocean Insight FLAME-NIR+ Bedienungsanleitung

Parker

Parker ALIGN-MG-NA Bedienungsanleitung

BD 644787 Bedienungsanleitung

DENTAURUM

DENTAURUM Compact Megaplus Bedienungsanleitung

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Bedienungsanleitung

VWR

VWR SAS Super IAQ Bedienungsanleitung

illumina

illumina MiSeqDx Bedienungsanleitung