Greenlee 200B-G Bedienungsanleitung

English ..........1

Français ........9

Español.........17

Deutsch........25

Italiano ........33

Português

do Brasil.....41

INSTRUCTION MANUAL

200B-G Tone Probe

with Adjustable Volume

200EP-G Tone Probe

with Adjustable Volume, Visual

Signal Indicator, Headset Jack,

Handset Connection Tabs,

and Flashlight

Read and understand this material before

operating or servicing this equipment.

Failure to understand how to safely operate

this tool could result in an accident causing

serious injury or death.

SAFETY ALERT

SYMBOL

This symbol is used to call your attention to hazards or

unsafe practices which could result in an injury or property

damage. The signal word, deﬁned below, indicates the

severity of the hazard. The message after the signal word

provides information for preventing or avoiding the hazard.

Immediate hazards which, if not avoided, WILL result in

severe injury or death.

Hazards which, if not avoided, COULD result in severe

injury or death.

Hazards or unsafe practices which, if not avoided, MAY

result in injury or property damage.

When in Loudspeaker mode, hold loudspeaker

more than 30 cm (1 ft) from ear.

Misuse could result in hearing damage.

All speciﬁcations are nominal and may change as design improvements

occur. Greenlee Textron Inc. shall not be liable for damages resulting from

misapplication or misuse of its products.

KEEP THIS MANUAL

Electric shock hazard:

• Do not expose this unit to rain or moisture.

Contact with live circuits could result in

severe injury or death.

• Use this unit for the manufacturer’s

intended purpose only, as described in

this manual. Any other use can impair the

protection provided by the unit.

• Use test leads or accessories that are

appropriate for the application. Refer to the

category and voltage rating of the test lead

or accessory.

• Inspect the test leads or accessory before

use. The item(s) must be clean and dry, and

the insulation must be in good condition.

Failure to observe these warnings could result

in severe injury or death.

Electric shock hazard:

• Do not attempt to repair this unit. It contains no user-

serviceable parts.

• Do not expose the unit to extreme temperatures or high

humidity. Refer to “Speciﬁcations.”

Failure to observe these precautions may result in injury and

can damage the instrument.

CAT O 100V MAX.

Description

The 200B-G and 200EP-G Tone Probes, when used in

conjunction with any Greenlee tone generator, are designed

to identify and trace wires or cables within a group without

damaging the insulation.

2 3 4

8 7 6 5

Figure 1. Features

Features include:

1. Resistive plastic carbon-ﬁber tip to prevent accidental shorts

when probing wires

2. Adjustable volume sensitivity control

3. Battery compartment

4. Recessed terminal ports for handset connection*

5. Spring-loaded ON/OFF/ﬂashlight* button

6. LED*

7. Headset jack (acoustically protected)*

8. High power ﬂashlight*

* 200EP-G only.

Safety

Safety is essential in the use and maintenance of Greenlee tools

and equipment. This instruction manual and any markings on

the tool provide information for avoiding hazards and unsafe

practices related to the use of this tool. Observe all of the safety

information provided.

Purpose of this Manual

This instruction manual is intended to familiarize all personnel

with the safe operation and maintenance procedures for the

Greenlee 200B-G and 200EP-G Tone Probes.

Keep this manual available to all personnel.

Replacement manuals are available upon request at no charge

at www.greenlee.com.

Operation

1. Connect the leads of a Greenlee tone-sending test set

(e.g.77HP) as follows:

a. Pair Identiﬁcation, to the two wires of the pair.

SeeFigure2a.

b. Single Conductor/Cable Tracing: Connect the RED lead to

the subject wire and the BLACK lead to earth or ground.

See Figure 2b.

Note: Refer to the instruction manual provided with the tone

generator for more details.

Figure 2a. Pair Tracing Figure 2b. Cable Tracing

2. Place the test set in the TONE position.

3. To activate the probe, press and hold the ON/OFF button. This

button must remain depressed to operate. Hold the tip of the

probe near the tone generator and listen for the tone. This

veriﬁes that the tone generator is working and identiﬁes the

sound of the tone (steady, warbling, etc.).

4. Once activated, the volume control can be adjusted to suit

the environment. Reception can be increased to overcome

noise (e.g., vehicular trafﬁc, airplanes, or engine room) or

decreased to reduce interference (e.g., computer/data hum

or AC buzz).

5. The 200EP-G is equipped with recessed terminal ports for

connecting a lineman’s handset. Attaching the handset in

TALK mode automatically activates the ampliﬁer.

6. Touch the tip of the probe to the insulation of each conductor.

Reception of tone will be loudest on the subject wire

and detection may be improved by separating the wires

from the group. If more than one pair or single conductor

is carrying the tone, decrease the volume until only the

subject conductor is left with tone, ensuring that positive

identiﬁcation has been made.

7. When pair tracing, in order to conﬁrm that the correct pair

has been identiﬁed, separate the two wires. The signal will

be as loud on each of the pair wires and will NULL halfway

between the two wires.

8. On the 200EP-G, press the ON/OFF button further to its

second position to turn the ﬂashlight ON. Reduce pressure

slightly to turn it back OFF.

Note: To use the 200EP-G without pressing the ON/OFF button,

connect a jumper, a telephone test set (in TALK mode), or

headset to the recessed tabs near the speaker.

Speciﬁcations

Electrical

Gain (nominal): 30 dB

Input Impedance (nominal): 100 MΩ

Probe Tip Resistance (min):

Metal Tip: 0 Ω

Plastic Tip: 300 Ω

Headset: 3.5 mm stereo plug; 8 ohms minimum

Battery: One 9 VDC (NEDA 1604, JIS 006P, or IEC 6LR61)

Battery Life (nominal): 50 hours

Physical

Length: 231 mm (9.0”)

Width: 55 mm (2.2”)

Depth: 28 mm (1.1”)

Weight: 145 g (5.2 oz)

Operating/Storage Conditions

Temperature: 0 °C to 50 °C (32 °F to 122 °F)

Maintenance

Battery Replacement

1. Turn the unit off.

2. Remove the screw and then the battery cover.

3. Replace the battery (observe polarity).

4. Replace the battery cover and the screw.

DO NOT OVERTIGHTEN SCREW.

Tip Replacement

1. Turn the unit off.

2. Remove the two slotted screws and CAREFULLY separate the

two halves of the housing. Do not strain the exposed wire

leads.

3. Replace the tip.

4. Re-assemble the housing. DO NOT OVERTIGHTEN SCREWS.

Cleaning

Periodically wipe with a damp cloth and mild detergent; do not

use abrasives or solvents.

One-Year Limited Warranty

Greenlee Textron Inc. warrants to the original purchaser of these goods

for use that these products will be free from defects in workmanship and

material for one year, excepting normal wear and abuse.

For all Test Instrument repairs, you must ﬁrst request a Return

Authorization Number by contacting our Customer Service department at:

toll free in the US and Canada 800-642-2155

Telephone +1 760-598-8900

Facsimile +1 760-598-5634.

This number must be clearly marked on the shipping label. Ship units

Freight Prepaid to: Greenlee Repair Center, 1390 Aspen Way, Vista, CA

92081 USA.

Mark all packages: Attention: TEST INSTRUMENT REPAIR.

For items not covered under warranty (such as dropped, abused, etc.)

repair cost quote available upon request.

Note: Prior to returning any test instrument, please check to make sure

batteries are fully charged.

Greenlee / A Textron Company

4455 Boeing Drive • Rockford, IL 61109-2988 • USA

815-397-7070

Greenlee Textron Inc. is a subsidiary of Textron Inc.

www.greenlee.com

Do not discard this product or throw away!

For recycling information, go to www.greenlee.com.

MANUEL D’INSTRUCTIONS

Sonde de tonalité 200B-G

à volume réglable

Sonde de tonalité 200EP-G

à volume réglable, indicateur visuel de signal,

prise de casque d’écoute, languettes de

connexion de combiné et lampe

Lire et comprendre cette documentation

avant d’utiliser ou de réparer cet

équipement. Mal comprendre la manière

d’utiliser cet appareil en toute sécurité peut

résulter en un accident pouvant causer des

blessures graves, voire mortelles.

Enregistrez votre produit en ligne, www.greenlee.com

SYMBOLE

D’AVERTISSEMENT

Ce symbole met en garde contre les risques et les

manipulations dangereuses pouvant entraîner des

blessures ou l’endommagement du matériel. Le mot

indicateur, déﬁni ci-dessous, indique la gravité du danger.

Le message qui suit le mot indicateur indique comment

empêcher le danger.

Danger immédiat qui, s’il n’est pas pris en considération

ENTRAINERA des blessures graves, voire mortelles.

Danger qui, s’il n’est pas pris en considération, POURRAIT

entraîner des blessures graves, voire mortelles.

Dangers ou manipulations dangereuses qui, s’ils ne sont

pas pris en considération, POURRAIENT EVENTUELLEMENT

entraîner des dommages à la propriété ou causer des

blessures.

En mode haut-parleur, tenez le haut-parleur à

plus de 30 cm (1 pied) de votre oreille.

Une mauvaise utilisation peut entraîner une

diminution de l’acuité auditive.

Toutes les spéciﬁcations sont nominales et sujettes à des modiﬁcations

lorsque la conception est améliorée. Greenlee Textron Inc. ne peut être

responsable pour des dommages résultant d’une application incorrecte ou

d’une mauvaise utilisation de ses produits.

CONSERVER CE MANUEL

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Greenlee Messgerät Handbücher

Greenlee

Greenlee 93-172 Bedienungsanleitung

Greenlee

Greenlee CSJ-100 Bedienungsanleitung

Greenlee

Greenlee TM-400 Bedienungsanleitung

Greenlee

Greenlee 5882A Bedienungsanleitung

Greenlee

Greenlee DataScout 10G Bedienungsanleitung

Greenlee

Greenlee 5880 Bedienungsanleitung

Greenlee

Greenlee TS90 TelScout Bedienungsanleitung

Greenlee

Greenlee IPM-300 Bedienungsanleitung

Greenlee

Greenlee CLM-1000 Bedienungsanleitung

Greenlee

Greenlee TML-30 Bedienungsanleitung

Greenlee

Greenlee IPM-400 Bedienungsanleitung

Greenlee

Greenlee ANM-50 Bedienungsanleitung

Greenlee

Greenlee 5778 Leitfaden

Greenlee

Greenlee 93-20 Bedienungsanleitung

Greenlee

Greenlee Pull Connect Bedienungsanleitung

Greenlee

Greenlee 5990A Bedienungsanleitung

Greenlee

Greenlee 5883 Bedienungsanleitung

Greenlee

Greenlee FC-110 Bedienungsanleitung

Greenlee

Greenlee 180XL Bedienungsanleitung

Greenlee

Greenlee CMGL-10 Bedienungsanleitung

Greenlee

Greenlee 5990A Bedienungsanleitung

Greenlee

Greenlee CMT-80 Bedienungsanleitung

Greenlee

Greenlee CM-1360 Bedienungsanleitung

Greenlee

Greenlee 93-808 Leitfaden

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung