HP D7171A - NetServer - LPr Bedienungsanleitung

configuration

Evolving

a higher

level of

protection

NetServer Rack ConfigurationHP

April 1999

Expanding Possibilities

Using the EIA total,

determine the rack size(s)

and quantity needed

Make a complete list of all

equipment to be rackmounted

Total the EIA units required for

all equipment*

Calculate the power

requirements* Identify the PDU(s)

and cord sets required

Identify the amount of

ballast recommended

Identify sizes and quantity

from chosen rack line

Identify additional items:

• Rack delivery services

• Front doors

• Tie kits

• Side panel kits

• Switchboxes

• Rackmount kits

• Accessories

Calculate the total

equipment weight*

Choose the /E or /U

rack line

Choose additional items to

complete your rack solution

Selection list is complete —

place order

* See Calculation Configuration Table — page 15

Fill in the selection list on

the following page with items

identified in this shaded area.

Product information is also available at:

NetServer Rack Configuration Guide

This configuration guide is

intended to allow you to:

■Calculate the power

requirements, weight and

stability of your rack solution

■Determine the number of

racks required to rackmount

your equipment

■Identify the key features of

racks and accessory products

■Generate a complete custom

list of rack and accessories

required

HP strongly recommends the

use of the HP NetServer Rack

Assistant configuration software

to configure your rack solution.

This free tool is available from

the world wide web at

http://www.hp.com/go/netserver

If, for any reason, you are not able to use the Rack Assistant software,

follow the steps below to create your custom rack solution. For details

of each step, see the Configuration Details on pages 12 and 13.

http://www.hp.com/go/enclosures

Rack System Selection List for NetServers

Description Product Number Quantity For details, see page

HP Rack System Model HP Rack System/E41 J1500A ______ 4

HP Rack System/E33 J1501A ______ 4

HP Rack System/E25 J1502A ______ 4

HP Rack System/U33 J1466A ______ 5

HP Rack System/U25 J1464A ______ 5

Delivery Services Inside delivery service J1543A ______ 4

Coordinated shipment service J1544A ______ 5

Front Doors Front door for /E41 J1509A ______ 6

Front door for /E33 or /U33 J1510A ______ 6

Front door for /E25 or /U25 J1511A ______ 6

Tie Kits Tie Kit for /E41 J1512A ______ 6

Tie Kit for /E33 or /U33 J1513A ______ 6

Side Panel Kits Side panel kit for /E41 J1506A ______ 6

Side panel kit for /E33 J1507A ______ 6

Side panel kit for /E25 J1508A ______ 6

Power Distribution

PDUs 100-240V, 10 amps E7670A ______ 7

100-240V, 16 amps E7671A ______ 7

Bundle (1 ea. E7670A, E7671A, E7742A) E7672A ______ 7

100-240V, 16 amps E7674A ______ 7

100-127V, 16 amps E7675A ______ 7

100-240V, 16 amps E7676A ______ 7

Cord Sets 100-127V NEMA (to wall), C19 to 5-20P E7802A ______ 7

200-240V IEC (to wall or UPS), C19 to L6-20P E7803A ______ 7

100-240V IEC

(toserver,storageorUPS)

, C19 to C20 E7804A ______ 7

200-240V IEC (to UPS), C19 to L6-30P E7805A ______ 7

100-240V (to wall or UPS), C19 to unterminated E7806A ______ 7

250V IEC for LX Pro/Lxe Pro E7807A ______ 7

(to server, storage or UPS), C14 to C15

240V IEC (to European wall), C19 to IEC309 E7808A ______ 7

240V IEC (to European wall), C19 to CEE7/7 E7809A ______ 7

240V IEC

(to server, storage or UPS)

, C13 to C14 E7742A ______ 7

127V NEMA

(to server, storage or UPS)

, E7743A ______ 7

C13 to 5-15P

240V IEC

(to server, storage or UPS)

E7798A ______ 7

Switchboxes 4-port switchbox, plus 4 cable sets J1493B ______ 9

8-port switchbox, plus 8 cable sets J1497B ______ 9

Rackmount Kits

Universal Keyboard rackmount kit J1518A ______ 8

Monitor rackmount kit J1519A ______ 8

Plain shelf rackmount kit J1520A ______ 8

Servers NetServer LXr Pro Conversion Kit* J1523A ______ 9

NetServer LX/LXe J1455B ______ 9

NetServer LCII J1456B ______ 9

NetServer E J1496C ______ 9

Rackmount kit included with product

NetServer LH 3r Included

NetServer LXr Pro and LXr Pro8 Included

Storage NetServer Storage System/6 J1492B ______ 9

Rackmount kit included with product

NetServer Storage System/8 Included or C2788B* ______ 9

HP SureStore DLT Library 4115r and 4215r Included

Accessories Computer rails C2788B ______ 9

Ballast C2790A ______ 10

Filler panels (qty 6) J1514A ______ 10

Cable guide (qty 2) E7723B ______ 10

Mounting hardware J1522A ______ 11

Lift hooks (qty 4) J1521A ______ 11

Rail spacers (qty 4) J1516A ______ 11

*Needed only to mount in Rack System/E or Rack System/U

HP Rack System/E

Advanced, full-featured rack for the most demanding rackmount

requirements. Electronic Industry Association (EIA) standard compliant.

HP Rack System/E

Product Numbers J1500A J1501A J1502A

EIA Units 41U 33U 25U

Caster rating 1000 lbs per caster 1000 lbs per caster 1000 lbs per caster

Color Top and rear door Quartz gray Quartz gray Quartz gray

Columns and base Slate gray Slate gray Slate gray

Weight Empty rack 73.5 kg (162 lbs) 69 kg (153 lbs) 65 kg (144 lbs)

Packaged 142.4 kg (314 lbs) 132.9 kg (293 lbs) 124.3 kg (274 lbs)

Rear door 13.2 kg (29 lbs) 12.7 kg (28 lbs) 8.6 kg (19 lbs)

Dimensions Rack ( w x d x h ) 23.5 in x 36.5 in x 77.5 in 23.5 in x 36.5 in x 63.5 in 23.5 in x 36.5 in x 49.5 in

Rack packaged 40 in x 48 in x 86.5 in 40 in x 48 in x 72.5 in 40 in x 48 in x 58.5 in

( w x d x h )

Delivery Services

J1543A Inside Delivery Service—Available in the US only

Provides for delivery of rack to the installation site at the specified shipping address and removal of

packaging materials upon customer’s request. Order one part number per rack. 1–2 week delivery time.

Key Features

■Extendible top allows for an

additional 8U of vertical space

to be added to an existing rack

■Optimum ventilation including

perforated rear door and fully

perforated top

■Ships and moves fully

integrated, up to 1800 lbs.

■Retractable anti-tip foot

extends from front or rear

■Numbered columns for easy

integration

■Available in three sizes:

41U, 33U, 25U

Use the Rack System/E when

you want:

■Maximum configuration

flexibility

■To mount equipment up to

2000 lbs.

■Optimum ventilation capacity

■Vertical extension capability

to an existing rack

■Optimum stability while

servicing slide-mounted

equipment

Features

1Fully perforated top

2Lockable perforated rear door,

63% airflow

3Numbered columns

(numbered from bottom to top)

4Bi-directional, retractable anti-tip foot

5Casters

6Leveling feet

7Solid base

Optional

8Modular side panels

9Lift hooks

10 Filler panels

11 Perforated front door, 63% airflow

12 Ballast

HP Rack System/U

Utility rack for basic rackmounting needs.

Electronic Industry Association (EIA) standard compliant.

Key Features

■Ships and moves fully integrated, up to 1000 lbs.

■Numbered columns for easy integration

■Adequate ventilation for NetServer systems

■One-piece removable side panels

■Perforated rear door, solid top

■Bolt-on anti-tip foot

■Available in two sizes: 33U, 25U

Use the Rack System/U when you want:

■Basic rack features

■To mount equipment with no special

ventilation requirements

Features

1Solid top

2Lockable perforated rear door,

63% airflow

3Numbered columns

(numbered from bottom to top)

4Bolt-on anti-tip foot

5Side panels

6Casters

7Leveling feet

8Solid base

9Cable guide

Optional

10 Filler panels

11 Ballast

12 Perforated front door, 63% airflow

Product Numbers J1466A J1464A

EIA Units 33U 25U

Caster rating 225 lbs per caster 225 lbs per caster

Color Top cap, columns, side panels Quartz gray Quartz gray

and rear door

Weight Empty rack 101.2 kg (223 lbs ) 84.4 kg (186 lbs)

Packaged 116.6 kg (257 lbs) 108 kg (238 lbs)

Rear door 8.6 kg (19 lbs) 7.6 kg (16 lbs)

Side panels 17.2 kg (38 lbs) 12.7 kg (28 lbs)

Dimensions Rack ( w x d x h ) 23.4 in x 36.5 in x 63.2 in 23.4 in x 36.5 in x 49.2 in

Rack packaged ( w x d x h ) 40 in x 48 in x 72.5 in 40 in x 48 in x 58.5 in

J1544A Coordinated Shipment Delivery Service—Available in the US only

Provides for rack and accessories to arrive within a 3-day period of each other at the customer location.

Accessories will arrive boxed together in one shipment. Order one part number per order. 1–2 week delivery time.

Doors, Tie Kits and Side Panels

Front Doors

Key Features

■Perforated, 63% airflow

■Lockable latch for equipment

security

■All equipment is visible through

the perforations

■Mounting hardware included

Use a front door to:

■Secure equipment from

unwelcome access

■Provide a clean aesthetic finish

to the rack Product No. Use with

J1509A /E41

J1510A /E33 and /U33

J1511A /E25 and /U25

This tie kit can also be used to connect

the /E41 with either an /E33 or /U33.

Product No. Use with

J1512A /E41

J1513A /E33 and /U33

Tie Kits

Key Features

■Easily installed without

removing or turning off

rackmounted equipment

■Can connect racks of different

sizes together (41U and 33U)

■Can connect /E and /U racks

together

■Increases security of equipment

by reducing side access

■Mounting hardware included

Use a tie kit to:

■Connect two or more racks

together

Side Panels

Use only with the Rack System/E

Key Features

■Snap on/off design, requires no

tools for installation or removal

■Kits contain the panels needed

to cover both sides of the rack

■Only one side panel kit is

required for a tied together

rack configuration

Use side panels to:

■Gain easy side access just

where you need it. Security is

maintained if a front and rear

are installed

■Provide a finished clean look

to the rack solution

/E25 Side Panel Kit

Product No. Use with* Kit contains

J1506A /E41 Qty: 2 9U side panels, Qty: 8 8U side panels

J1507A /E33 Qty: 2 9U side panels, Qty: 6 8U side panels

J1508A /E25 Qty: 2 9U side panels, Qty: 4 8U side panels

* Side panels come standard with the Rack System/U

/E25 Side Panels Installed

Perforation Material

Tie Kit Contents

Front Doors

PDUs, Cords/Cables

Cords Sets

Modular Power

Distribution Units (PDUs)

Key Features

■Up to four PDUs per rack

■Mounting hardware included

■Can be mounted vertically

or horizontally on columns

Use a PDU to:

■Conveniently provide power

to rackmounted equipment

Product Voltage Max Outlets Inlets Certification

Number Current

E7670A 100-240 (Univ) 10 amps 10 IEC320 C13 1 IEC320 C14 UL, C-UL, TUV-R GS

E7671A 100-240 (Univ) 16 amps 6 IEC320 C13, 2 IEC320 C19 1 IEC320 C20 UL, C-UL, TUV-R GS

E7672A* 100-240 (Univ) 16 amps 16 IEC320 C13, 2 IEC320 C19 1 IEC320 C20 UL, C-UL, TUV-R GS

E7674A 100-240 (Univ) 16 amps 7 IEC320 C13, 1 IEC320 C19 1 IEC320 C20 UL, C-UL, TUV-R GS

E7675A†100-127 16 amps 9 NEMA 5-15R, 1 IEC320 C13 1 IEC320 C20 UL, C-UL

E7676A 100-240 (Univ) 16 amps 10 IEC320 C13 1 IEC320 C20 UL, C-UL, TUV-R GS

* E7672Aisabundledsetof1ea.E7670A,E7671AandE7742Ajumpercable.

†For110V environments, HPrecommendstheuseof theE7675APDUbecauseNetServersship with apowerjumpercablecompatiblewithE7675Areceptacles.

PDUs

E7672A ContentsE7675A Contents

5-15P L6-30P L6-20P C14 C20 No Plug

5-15R C14 C20C13 C19

Plugs

5-20P

Outlets Inlets

IEC309 CEE7/7

Product Type CordLength Plug Compatible

Number APCUPS **

E7802A 100-127V NEMA (to wall) 4.5m (177.2in) C19 to 5-20P NS2200RM3U

E7803A 200-240V IEC (to wall or UPS) 4.5m (177.2in) C19 to L6-20P NS3000RMT3U

E7804A 100-240V IEC (toserver, storage or UPS) 4.0m (157.5in) C19 to C20 NS2200RMI3U

E7805A 200-240V IEC (to UPS) 4.5m (177.2in) C19 to L6-30P —

E7806A 100-240V IEC (to wall or UPS) 4.5m (177.2in) C19 to unterminated —

E7807A 250V IEC for LX Pro/Lxe Pro (to server, storage or UPS) 0.76m (29.9in) C14 to C15 —

E7808A 240V IEC (to European wall) 4.5m (177.2in) C19 to IEC309 —

E7809A 240V IEC (to European wall) 4.5m (177.2in) C19 to CEE7/7 —

E7742A 240V IEC (to server, storage or UPS) 2.5m (98.4in) C13 to C14 —

E7743A 127V NEMA (to server, storage or UPS) 2.5m (98.4in) C13 to 5-15P —

E7798A 240V IEC (to server, storage or UPS) 2.5m (98.4in) C19 to C20 —

** APC UPS products are sold and supported by APC and APC resellers (not orderable from HP).

J1519A Installed in Rack

Monitor Rackmount Kit Contents

Product No. Use with Kit contains EIA Units

J1519A All HP Racks Monitor base, snap-in front bezel, 11

mounting hardware

Monitor Rackmount Kit

Key Features

■Snap-in design

■Easy installation

■Mounting hardware included

Use the monitor rackmount kit to:

■Mount a 14”–19”monitor within

a rack

Rackmount Kits

J1518A Installed in Rack

Keyboard Rackmount Kit Contents

Product No. Use with Kit contains EIA Units

J1518A All HP Racks Keyboard kit assembly, 2

mounting hardware

Universal Rackmount Kits

Keyboard Rackmount Kit

Key Features

■Retracts into the rack when not

in use

■Easy installation

■Fits all standard keyboards

■Mounting hardware included

Use the keyboard kit to:

■Mount a keyboard and mouse

within a rack

Note: These kits do not include a

keyboard or mouse.

J1520A Installed in Rack Shelf Contents

Product No. Use with Kit contains EIA Units

J1520A All HP Racks Stationary shelf, 1

mounting hardware

Plain Shelf

Key Features

■Supports up to 68 kg (150 lbs)

■Easy installation

■Mounting hardware included

■Attractive quartz color

Use a shelf to:

■Provide a stationary surface in

a rack for products without

a custom rackmount kit.

Rackmount Kits, Switchboxes

J1493B Kit Contents

Product No. Description Use with Kit contains EIA Units

J1493B 4-port console All HP racks 4-port switchbox, 4 sets of mouse, keyboard, 1 unit – front mount;

switchbox and monitor cables and mounting hardware 0 unit – rear mount

J1497B 8-port console All HP racks 8-port switchbox, 8 sets of mouse, keyboard, 1 unit – front mount;

switchbox and monitor cables and mounting hardware 0 unit – rear mount

Switchboxes

Key Features

■Available in 4-port and 8-port

models

■Appropriate quantity of 3.66m

(12 ft) cable sets are included

■Software controlled

Use a switchbox to:

■Control multiple NetServers

from a single monitor,

keyboard and mouse

LH 3r Installed in Rack

J1455B Rackmount Kit Contents

Product No. Use with Rackmounted server EIA Units

J1455B All HP Racks LX Pro/LXe Pro 14

J1456B All HP Racks LC II 14

J1496C All HP Racks E Series 11

J1523A Only for /E and /U line LXr Pro 7

Rackmount kit is bundled with server, no separate purchase necessary.

All HP Racks LH 3r 8

All HP Racks LXr Pro8 10

Server Rackmount Kits

Key Features

■Designed to custom fit the

server

■Mounting hardware included

■Easy installation

Use the server rackmount kit to:

■Mount a server in a rack

Storage Rackmount Kits

Key Features

■Designed to custom fit the

storage system

■Mounting hardware included

■Easy installation

Use the storage rackmount kit to:

■Mount a storage system in

a rack

Product No. Use with Rackmounted Storage System EIA Units

J1492B All HP Racks Storage System/6 11

C2788B Only for /E and /U line Storage System/8 3

Needed only to mount in Rack System /E or RackSystem /U

J1492B Contents

J1497B Kit Contents

C2788B Contents

Accessories

C2790A Installed in Rack

Product No. Use with Kit contains

C2790A All HP Racks 30 lb. steel ballast, mounting hardware

Ballast

Key Features

■Mounts easily to the rear

columns

■Mounting hardware included

Use ballast to:

■Provide an added measure

of stability for servicing

slide-mounted equipment.

Filler panels

Product No. Use with Kit contains EIA Units

J1514A /E and /U racks only 6 filler panels 1 EIA unit per filler panel

Filler Panels

Key Features

■Easy snap-in design

■Contemporary industrial design

■No mounting hardware required

Use filler panels to:

■Attractively cover unused rack

space.

Cable Guide

Product No. Use with Kit contains

E7723B All HP Racks 2 19” cable guides, mounting hardware

Cable Guide

Key Features

■Sturdy 16-gauge metal will

support heavy cables

■Mounts vertically or horizontally

on rear columns

■Quick and easy installation

Use a cable guide to:

■Organize routing of data and

power cables

Andere Handbücher für D7171A - NetServer - LPr

117

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HP Rack & Stand Handbücher

HP Integrated Work Center Stand Gebrauchsanweisung

HP Dual Hinge Notebook Stand Technisches Datenblatt

HP AT-BT10 Bedienungsanleitung

HP 158222-B21 - StorageWorks Fibre Channel SAN Switch... Bedienungsanleitung

HP LaserJet Enterprise 600 Bedienungsanleitung

HP 245161-B22 - 10642 42U Rack Shock Pallet Bedienungsanleitung

HP Z600 - Workstation - 6 GB RAM Bedienungsanleitung

HP Quick Release EM870AA Gebrauchsanweisung

HP TFT7600 G2 Bedienungsanleitung

HP cc2300 Bedienungsanleitung

HP BT861AA Bedienungsanleitung

HP StorageWorks SSL1016 Bedienungsanleitung

HP HP 10000 G2 Series Bedienungsanleitung

HP System/E41 Bedienungsanleitung

HP ProCurve 6600-48G-4XG Bedienungsanleitung

HP HP 10000 G2 Series Bedienungsanleitung

HP StorageWorks 1000 - Modular Smart Array Bedienungsanleitung

HP P5389A - Intel Pentium III-S 1.4 GHz Processor... Bedienungsanleitung

HP 6400/8400 Bedienungsanleitung

HP DESKJET 350 Bedienungsanleitung

HP Intelligent Series Bedienungsanleitung

HP HP 10000 G2 Series Bedienungsanleitung

HP Location Discovery Services Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung