Interlogix UVD-XP4DNR(-P) Bedienungsanleitung

UVD-XP4DNR(-P)

Camera Quick Start

Guide

P/N 1079205B-EN • REV 1.0 • ISS 15JUN12



Quick Start Guide 1 EN

Description

The UVD-XP4DNR(-P) camera consists of the following parts:

• The camera assembly

• Monitor output cable

• Mounting screws, wall anchors, and hex key

Figure 1: The camera assembly and monitor output cable

1. Lens body 5. Camera body

2. Bubble 6. Monitor output BNC

3. Video monitor output 7. Monitor output RCA

4. OSD control pad

Use the video output BNC and power jack for normal system

operation. Use the monitor output cable for installation and

maintenance.

OSD control pad

The onscreen display (OSD) control pad is a five-direction joystick that

provides the ability to manually control the camera functions.

EN 2 Quick Start Guide

OSD control pad

Table 1 lists the OSD control pad functions and describes their use.

Table 1: OSD control pad functions

Pad directions Description

Up Moves the cursor upward to select an item.

Left Moves the cursor left to select or adjust the parameters

of the selected item.

Right Moves the cursor to the right to select or adjust the

parameters of the selected item.

Down Moves the cursor downward to select an item.

Enter Press the center of the control pad to display the Setup

menu. If the selected item has its own menu, press the

control pad to enter a submenu. Press the control pad for

2 seconds to save all settings and exit the Setup menu.

Installation

Complete all the necessary programming before you install the

camera. This section provides information on how to install the camera

and adjust camera angle and focus.

WARNING: To reduce the risk of fire or electronic shock, do not

expose the camera to rain or moisture and do not remove the cover or

back.

Cable connection

To make cable connections, do the following:

1. Connect a coaxial cable from the camera’s BNC connector to a

CCTV monitor or video recording device.

2. Connect a 12 VDC or 24 VAC power supply to the power input.

The label on the camera gives the following information:

Red cable. Power in.

Black cable. Power in.

Quick Start Guide 3 EN

White cable. Video out.

Black cable. Video ground.

Note: For AC24V or DC12V, Black or Red may be used for ground.

Camera installation

To mount the camera, attach the camera to the mounting surface using

the appropriate fasteners.

Angle adjustment

To adjust the horizontal angle of the platform up to 180 degrees, turn

the platform (1).

To adjust the horizontal angle of the rotor up to 350 degrees, turn the

rotor on the platform (2).

To adjust the vertical angle of the platform up to 90 degrees, turn the

platform (3).

Focus adjustment

To adjust the camera zoom and focus:

1. Zoom ring thumbscrew for VA2 and focus ring for VA9 lens.

2. Focus ring thumbscrew for VA2 and zooming ring for VA9 lens.

EN 4 Quick Start Guide

1. Loosen the zoom ring thumbscrew.

2. Turn the zoom ring to set the desired zoom.

3. Tighten the zoom ring thumbscrew.

4. Loosen the focus ring thumbscrew.

5. Turn the focus ring to set the desired focus.

6. Tighten the focus ring thumbscrew.

Connect the monitor

Program the cameras by attaching a standard video monitor to the

system.

To connect the monitor, do the following:

1. Plug the monitor output cable to the video monitor output

connector.

2. Connect the BNC cable to the video monitor.

3. Press the OK button to display the Setup menu.

Programming

The camera is configured through the setup menus which appear on-

screen. See Figure 2: Main menu

Table 1 lists the main menu options.

Quick Start Guide 5 EN

Table 2: Main menu options

Menu option Function

Presets Configures the preset for the lighting condition.

Setup Configures camera ID, motion detection, and wide

dynamic range options.

Viewing Configures flip and resolution.

Exposure Configures automatic gain control (AGC), AE preferences,

shutter limit, frame report, and B/W control.

White balance Configures automatic white balance (AWB) mode, and

auto tracking white balance (ATW).

Save/restore Saves user settings, restores user settings, and restores

factory settings.

Exit Menu Exits the OSD menu system and returns to live mode.

When in a submenu, you can easily move back to a previous menu,

save changes as well as cancel changes and return to live mode.

Select one of these options:

Prev. Returns to the previous menu.

Save Saves changes.

Cancel Cancels and returns to live mode.

Figure 2: Main menu

Table 1 lists the main menu options.

EN 6 Quick Start Guide

Table 2: Main menu options

Menu option Function

Presets Configures the preset for the lighting condition.

Setup Configures camera ID, motion detection, and wide

dynamic range options.

Viewing Configures flip and resolution.

Exposure Configures automatic gain control (AGC), AE preferences,

shutter limit, frame report, and B/W control.

White balance Configures automatic white balance (AWB) mode, and

auto tracking white balance (ATW).

Save/restore Saves user settings, restores user settings, and restores

factory settings.

Exit Menu Exits the OSD menu system and returns to live mode.

When in a submenu, you can easily move back to a previous menu,

save changes as well as cancel changes and return to live mode.

Select one of these options:

Prev. Returns to the previous menu.

Save Saves changes.

Cancel Cancels and returns to live mode.

Quick Start Guide 7 EN

Menu Map

Andere Handbücher für UVD-XP4DNR(-P)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Interlogix Sicherheitskamera Handbücher

Interlogix

Interlogix TVC-5120-1 Bedienungsanleitung

Interlogix

Interlogix TruVision TVB-2402 Bedienungs- und Wartungsanleitung

Interlogix

Interlogix TruVision HD-TVI 3MPX Merkblatt

Interlogix

Interlogix TVW-1120 Bedienungsanleitung

Interlogix

Interlogix UVD-XP4DNR Bedienungsanleitung

Interlogix

Interlogix TruVision Line Bedienungsanleitung

Interlogix

Interlogix UltraView UVC-6130-1-N Bedienungsanleitung

Interlogix

Interlogix PIR Bedienungsanleitung

Interlogix

Interlogix TruVision IP Dome Bedienungsanleitung

Interlogix

Interlogix TruVision 4 Series Bedienungsanleitung

Interlogix

Interlogix UltraView IP PTZ 36X Bedienungsanleitung

Interlogix

Interlogix 36X Bedienungsanleitung

Interlogix

Interlogix TruVision TVB 2102 Bedienungsanleitung

Interlogix

Interlogix UVP-N120P-36X(-P) Bedienungsanleitung

Interlogix

Interlogix MobileView MVC-7100-29-BL Bedienungsanleitung

Interlogix

Interlogix TruVision PTZ 36X Bedienungsanleitung

Interlogix

Interlogix TruVision Line Bedienungsanleitung

Interlogix

Interlogix TruVision Series Bedienungsanleitung

Interlogix

Interlogix TruVision TVB-2101 Bedienungsanleitung

Interlogix

Interlogix TruVision TVT-2101 Bedienungsanleitung

Interlogix

Interlogix UltraSync RS-3240 Bedienungsanleitung

Interlogix

Interlogix TruVision TVP-5101 Merkblatt

Interlogix

Interlogix TVD-5110-3 Bedienungsanleitung

Interlogix

Interlogix TruVision Line Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung