Kärcher BRC 46/38 C Bedienungsanleitung

Model: BRC 46/38 C (115V)

1.008-051.0

Operating Instructions (ENG)

Read these instructions before using the machine.

86306850 – A 12/27/07

MACHINE DATA LOG/OVERVIEW

BRC 46/38 C 86306850 12/27/07

Model:

Date of Purchase:

Serial Number:

Sales Representative:

Address:

Phone Number:

TABLE OF CONTENTS

BRC 46/38 C 86306850 12/27/07

Machine Data Log/Overview................................1

Table of Contents.................................................2

HOW TO USE THIS MANUAL

How to use this Manual........................................1-1

SAFETY

Important Safety Instructions ...............................2-1

Hazard Intensity Level..........................................2-2

Grounding Instructions.........................................2-3

OPERATIONS

Technical Specifications.......................................3-1

Controls/Component Location .............................3-2

Filling Operation...................................................3-5

Operations............................................................3-6

Cleaning Procedure. ............................................3-8

Accessory Tool Usage.......................................3-10

MAINTENANCE

Periodic Maintenance...........................................4-1

Daily/ Regular Maintenance.................................4-1

Vacuum Motor Replacement ...............................4-2

Solution Pump Replacement................................4-3

Belt Replacement.................................................4-4

Wiring Diagram. ...................................................4-5

Troubleshooting Chart..........................................4-6

GROUP PARTS LIST

Frame Assembly. ...............................................5-1

Brush Assembly. ................................................5-3

Pump Assembly. ................................................5-5

Vacuum Shoe Assembly....................................5-7

Control Panel Assembly.....................................5-9

Handle Assembly...............................................5-11

Solution Tank Assembly..................................... 5-13

Recovery Tank Assembly. .................................5-15

Suggested Spare Parts/Notes ...........................5-17

HOW TO USE THIS MANUAL

BRC 46/38 C 86306850 12/27/07

1-1

This manual contains the following sections:

- HOW TO USE THIS MANUAL

- SAFETY

- OPERATIONS

- MAINTENANCE

- PARTS LIST

The HOW TO USE THIS MANUAL section will tell

you how to find important information for ordering

correct repair parts.

Parts may be ordered from authorized dealers.

When placing an order for parts, the machine model

and machine serial number are important. Refer to

the MACHINE DATA box which is filled out during

the installation of your machine. The MACHINE

DATA box is located on the inside of the front cover

of this manual.

The model and serial number of your machine is on

the bottom back-end of the machine.

The SAFETY section contains important information

regarding hazard or unsafe practices of the

machine. Levels of hazards is identified that could

result in product or personal injury, or severe injury

resulting in death.

The OPERATIONS section is to familiarize the

operator with the operation and function of the

machine.

The MAINTENANCE section contains preventive

maintenance to keep the machine and its

components in good working condition. They are

listed in this general order:

- Periodic

- Daily/Regular

The PARTS LIST section contains assembled parts

illustrations and corresponding parts list. The parts

lists include a number of columns of information:

- REF – column refers to the reference

number on the parts illustration.

- PART NO. – column lists the part

number for the part.

- PRV NO. – reference number.

- QTY – column lists the quantity of the

part used in that area of the machine.

- DESCRIPTION – column is a brief

description of the part.

- SERIAL NO. FROM – column indicates

the first machine the part number is

applicable to. When the machine design

has changed, this column will indicate

serial number of applicable machine.

The main illustration shows the most

current design of the machine. The

boxed illustrations show older designs.

If column has an asterisk (*), call

manufacturer for serial number.

-NOTES – column for information not

noted by the other columns.

NOTE: If a service or option kit is installed on your

machine, be sure to keep the KIT INSTRUCTIONS

which came with the kit. It contains replacement

parts numbers needed for ordering future parts.

NOTE: The number on the lower left corner of the

front cover is the part number for this manual.

MODEL _____________________________________

DATE OF PURCHASE ________________________

SERIAL NUMBER ____________________________

SALES REPRESENTATIVE # ___________________

ADDRESS ___________________________________

PHONE NUMBER ___________ __________________

SAFETY INSTRUCTIONS

BRC 46/38 C 86306850 12/27/07 2-1

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precaution

must always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.

This machine is for commercial use.

To reduce the risk of fire, electric shock, or injury:

Connect to a properly grounded outlet. See Grounding Instructions.

Do not leave the machine unattended. Unplug machine from outlet when not in use and before

maintenance or service.

Use only indoors. Do not use outdoors or expose to rain.

Do not allow machine to be used as a toy. Close attention is necessary when used by or near

children.

Use only as described in this manual. Use only manufacturer’s recommended components and

attachments.

Do not use damaged electrical cord or plug. Follow all instructions in this manual concerning grounding

the machine. If the machine is not working properly, has been dropped, damaged, left outdoors, or

dropped into water, return it to an authorized service center.

Do not pull or carry machine by electrical cord, use as a handle, close a door on cord, or pull cord

around sharp edges or corners.

Do not run machine over cord. Keep cord away from heated surfaces.

Do not unplug machine by pulling on cord. To unplug, grasp the electrical plug, not the electrical cord.

Do not handle the electrical plug or machine with wet hands.

Do not operate the machine with any openings blocked. Keep openings free of debris that may reduce

airflow.

This machine is intended for cleaning carpet only.

Do not vacuum anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

This machine is not suitable for picking up health endangering dust.

Turn off all controls before unplugging.

Machine can cause a fire when operating near flammable vapors or materials. Do not operate this

machine near flammable fluids, dust or vapors.

This machine is suitable for commercial use, for example in hotels, schools, hospitals,

factories, shops and offices for more than normal housekeeping purposes.

Maintenance and repairs must be done by qualified personnel.

If foam or liquid comes out of machine, switch off immediately.

SAVE THESE INSTRUCTIONS

WARNING:

HAZARD INTENSITY LEVEL

BRC 46/38 C 86306850 12/27/07

2-2

The following symbols are used throughout this guide as indicated in their descriptions:

HAZARD INTENSITY LEVEL

There are three levels of hazard intensity identified by signal words -WARNING and CAUTION and FOR

SAFETY. The level of hazard intensity is determined by the following definitions:

WARNING - Hazards or unsafe practices which COULD result in severe personal injury or death.

CAUTION - Hazards or unsafe practices which could result in minor personal injury or product or property

damage.

FOR SAFETY: To Identify actions which must be followed for safe operation of equipment.

Report machine damage or faulty operation immediately. Do not use the machine if it is not in proper

operating condition. Following is information that signals some potentially dangerous conditions to the

operator or the equipment. Read this information carefully. Know when these conditions can exist. Locate

all safety devices on the machine. Please take the necessary steps to train the machine operating

personnel.

FOR SAFETY:

DO NOT OPERATE MACHINE:

Unless Trained and Authorized.

Unless Operation Guide is Read and understood.

In Flammable or Explosive areas.

In areas with possible falling objects.

WHEN SERVICING MACHINE:

Avoid moving parts. Do not wear loose clothing; jackets, shirts, or sleeves when working on the

machine. Use manufacturer approved replacement parts.

!WARNING

!CAUTION

GROUNDING INSTRUCTIONS

BRC 46/38 C 86306850 12/27/07 2-

THIS PRODUCT IS FOR COMMERCIAL USE ONLY.

ELECTRICAL:

In the USA this machine operates on a standard 15 amp

115V, 60 hz, A.C. power circuit . The amp, hertz, and

voltage are listed on the data label found on each

machine. Using voltages above or below those

indicated on the data label will cause serious damage to

the motors.

GROUNDING INSTRUCTIONS:

This appliance must be grounded. If it should

malfunction or break down, grounding provides a path of

least resistance for electric current to reduce the risk of

electric shock. This appliance is equipped with a cord

having an equipment-grounding conductor and

grounding plug. The plug must be inserted into an

appropriate outlet that is properly installed and grounded

in accordance with all local codes and ordinances.

This appliance is for use on a nominal 115-volt circuit,

and has a grounded plug that

looks like the plug in “Fig. A”. A temporary adaptor that

looks like the adaptor in “Fig . C” may be used to

connect this plug to a 2-pole receptacle as shown in

“Fig. B”, if a properly grounded outlet is not available.

The temporary adaptor should be used only until a

properly grounded outlet (Fig. A) can be installed by a

qualified electrician. The green colored rigid ear, lug, or

the like extending from the adaptor must be connected

to a permanent ground such as a properly grounded

outlet box cover. Whenever the adaptor is used, it must

be held in place by a metal screw.

Improper connection of the equipment-grounding

conductor can result in a risk of electric shock. Check

with a qualified electrician or service person if you are in

doubt as to whether the outlet is properly grounded. Do

not modify the plug provided with the appliance - if it will

not fit the outlet, have a proper outlet installed by a

qualified electrician.

WARNING:

NOTE: In Canada, the use of a temporary adaptor is no

ermitted by the Canadian Electrical Code

PROPER GROUNDING

Metal Screw

daptor

Grounded Outlet Box

Fig. A Fig. B

Fig. C

Tab For Grounding Screw

Grounded

Outlet

Grounding Pin

dapto

TECHNICAL SPECIFICATIONS

BRC 46/38 C 86306850 12/27/07

3-1

POWER TYPE

ELECTRICAL: 115 V, 15 A, 60 HZ

ELECTRIC VACUUM MOTOR: (1) –3 stage, 1 hp, 99 cfm

(2.80 cubic meters/min.) Waterlift –117” (297cm)

BRUSH: (1) 18” (45.7 cm.)

SOLUTION PUMP: 100 PSI, diaphragm style, internal

bypass

SOLUTION CAPACITY: 10 gallons (37.8 ltr)

RECOVERY CAPACITY: 10 gallons (37.8 ltr)

BRUSH SPEED: 1000 rpm

GENERAL DIMENSIONS/WEIGHT

Vacuum shoe: 20” (51 cm) cast aluminum

with spring loaded down pressure

WHEELS: (2) 10” dia. (25 cm) wheels by 2”

WEIGHT: 94 lbs. (43 kg)

LENGTH: 33” (84 cm)

HEIGHT: 44” (112 cm)

WIDTH: 21” (53 cm)

SOLUTION SPRAY: 2 quick change jets.

POWER CABLE: 50’ (12.7 m) (14 gauge)

21”

(53cm)

33”

(84cm)

44”

(112cm)

CONTROLS/COMPONENT LOCATIONS

BRC 46/38 C 86306850 12/27/07 3-2

1. Main Handle. Used to pull and maneuver

machine.

2. Handle Adjustment. Used to adjust height of

handle.

3. Electrical Cord.

4. Pump Switch. Turns on pump and enables

spray.

5. Brush/Spray Switch. Turns on brush motor and

activates electro-valve to dispense solution to

floor through jets. Intermittent, off, and

continuous settings.

6. Vacuum Motor Switch. Turns on vacuum

motor.

7. Brush Motor Circuit Breaker. 6 amp. Breaker

protecting brush motor.

8. Vacuum Motor Circuit Breaker. 15 amp.

Breaker protecting vacuum motor.

9. Recovery Dump Hose. Facilitates draining

dirty cleaning solution.

10. Solution Dump Hose. Facilitates draining

excess cleaning solution from solution tank.

4 6

7 8

CONTROLS/COMPONENT LOCATIONS

BRC 46/38 C 86306850 12/27/07

3-3

1. Solution Accessory Tool Hookup. Used for

various auxiliary cleaning tools.

2. Vacuum Hose Door. Used to connect various

auxiliary 1 ½ inch cleaning tool vacuum hoses.

3. Brush Height Adjustment. Used to regulate

brush height from storage position to various

carpet heights.

4. Recovery Tank. Used to collect dirty cleaning

solution.

5. Solution Tank. Used to hold cleaning solution.

6. Recovery Tank Dome.

7. Vacuum Shoe.

8. Brush Housing.

9. Front Lifting Handle.

10. Cleaning Solution Filter.

11. Solution Tank Fill Hose.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kärcher Staubsauger Handbücher

Kärcher

Kärcher SE 4001 Bedienungsanleitung

Kärcher

Kärcher NT 611 ECO M A Bedienungsanleitung

Kärcher

Kärcher SV 7 Bedienungsanleitung

Kärcher

Kärcher The Bee Bedienungsanleitung

Kärcher

Kärcher NT 35/1 Tact Bedienungsanleitung

Kärcher

Kärcher RC 3000 Bedienungsanleitung

Kärcher

Kärcher CV 38/2 Bedienungsanleitung

Kärcher

Kärcher 1.013-100.0 Bedienungsanleitung

Kärcher

Kärcher EB 30/1 Bedienungsanleitung

Kärcher

Kärcher NT 611 MWF Bedienungsanleitung

Kärcher

Kärcher 397 M plus Bedienungsanleitung

Kärcher

Kärcher SE 2001 Bedienungsanleitung

Kärcher

Kärcher ARMADA BRC 40/22 C Bedienungsanleitung

Kärcher

Kärcher NT 72/2 ECO TC Bedienungsanleitung

Kärcher

Kärcher WV 75 plus Bedienungsanleitung

Kärcher

Kärcher SC 1402 Bedienungsanleitung

Kärcher

Kärcher VC 6300 Bedienungsanleitung

Kärcher

Kärcher WD 3 Premium Bedienungsanleitung

Kärcher

Kärcher NT 22/1 Ap L Bedienungsanleitung

Kärcher

Kärcher BRC 30 C Bedienungsanleitung

Kärcher

Kärcher T 10/1 eco!efficiency Bedienungsanleitung

Kärcher

Kärcher RC 3000 Bedienungsanleitung

Kärcher

Kärcher NT 35/1 Ap Te Bedienungsanleitung

Kärcher

Kärcher WD 2.2 series Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung