Kohler Coralais K-15177 Bedienungsanleitung

Installation Guide

Kitchen Sink Faucets

Mproduct numbers are for Mexico (i.e. K-12345M)

Los números de productos seguidos de

Mcorresponden a México (Ej.

K-12345M)

Français, page“ Français-1”

Español, página“ Español-1”

K-15177 K-15178

114681-2-BC

Thank You For Choosing Kohler Company

We appreciate your commitment to Kohler quality. Please take a few

minutes to review this manual before you start installation. If you

encounter any installation or performance problems, please don’t

hesitate to contact us. Our phone numbers and web site are listed on

the back cover. Thanks again for choosing Kohler Company.

Tools and Materials

Before You Begin

Observe all local plumbing and building codes.

Shut off the water supplies.

Carefully inspect waste and supply tubing for any sign of

damage and replace if necessary.

For new installations, assemble the faucet on the sink before

installing the sink.

Before installation, unpack the new faucet and inspect it for

damage. Return the faucet to the carton until you are ready to

install it.

Kohler Co. reserves the right to make revisions in the design of

faucets without notice, as speciﬁed in the Price Book.

Plumbers

Putty Adjustable

Wrench Hex

Wrenches

114681-2-BC 2 Kohler Co.

1. Remote Valve Installation

Attach the spout hose to the long tube on the remote valve.

Slide the gasket up over the remote valve supply hose inlets.

Place the gasket on the bottom of the escutcheon.

NOTE: Plumbers putty or other sealant may be used instead of the

gasket provided. Apply the plumbers putty or other sealant

according to the manufacturer’s instructions.

Feed the remote valve supply hose inlets, handspray hose outlet

and spout hose through the sink hole.

Position the remote valve so that the lever handle is centered

when facing the user.

Slide the bracket and washer over the stud.

Tighten the nut securely to the stud.

Remove any excess putty or sealant.

Sink

Washer

Bracket

Gasket

Nut

Long Tube

Escutcheon

Spout

Hose

Apply

plumbers

putty.

Supply

Tubes

Remote Valve

Kohler Co. 3 114681-2-BC

2. Spout Installation

Slide the gasket over the spout shank and to the underside of the

spout base.

Place the spout shank through the sink.

NOTE: Plumbers putty or other sealant may be used instead of the

gasket provided. Apply the plumbers putty or other sealant

according the manufacturer’s instructions.

Position the metal washer to the spout shank from under the

sink.

Secure the spout shank with the nut.

Attach the other end of the spout hose from the remote valve to

the spout shank.

Remove any excess putty or sealant.

Apply

plumbers

putty.

Spout

Shank

Metal

Washer

Spout

Hose

Remote

Valve

Spout

Sink

Gasket

Nut

114681-2-BC 4 Kohler Co.

3. Handspray Installation

Apply a bead of plumbers putty or other sealant to the underside

of the spray holder according to the manufacturer’s instructions.

Insert the spray holder through the sink hole.

Hand tighten the nut to the spray holder from under the sink.

Remove any excess putty or sealant.

Position the faucet supply hoses to allow access for the handspray

hose connection.

Insert the handspray hose through the spray holder.

Attach the hose to the hose outlet.

Apply

plumbers

putty.

Handspray

Hose

Supply

Hoses

Handspray

Hose Outlet

Spray Holder

Handspray

Sink

Nut

Kohler Co. 5 114681-2-BC

4. Supply Installation

CAUTION: Risk of restricted water ﬂow. Severe bending of the

faucet supply hoses may cause kinking. Restricted water ﬂow

could result. To avoid kinking, carefully bend the faucet supply

hoses.

NOTE: If the sink is not installed, install it at this time. Be sure to

follow all instructions packed with the sink.

For ground joint connections:

Attach the remote valve supply hose marked ″COLD″to the cold

water supply tube.

Attach the other remote valve supply hose to the hot water

supply tube.

Slip the nut onto the supply stop tube.

Position the round end of the supply stop tube squarely into the

remote valve supply tube inlet and the other end into the supply

stop.

Tighten all nuts.

Water Supply

Tube

Valve Supply

Hose Inlet

Slip Nut

Supply Stop

114681-2-BC 6 Kohler Co.

5. Installation Checkout

Remove the aerator from the end of the spout by turning it

counterclockwise.

Turn on the main water supply.

Open the faucet handle to the ON position.

Flush hot then cold water through the faucet for about one

minute.

Push the faucet handle down to the OFF position.

Reattach the aerator by turning it clockwise.

Aerator

Spout

Kohler Co. 7 114681-2-BC

6. Water Temperature Adjustment

NOTE: Before adjusting the water temperature, ensure that the

handle is turned all the way to the left. This is the maximum hot

position.

Remove the handle and bonnet from the faucet body.

Lift the valve stem up and off the stop tab. The water will turn

on.

Align the stop tab with the mounting nut to establish the

maximum temperature.

Mark the maximum temperature on the mounting nut with a

marker or pencil.

Lift up the indexer and disk to clear the splines.

NOTE: Each spline notch represents approximately 9.5° F (5.3° C).

Turn the indexer, disk and valve stem counterclockwise, until the

temperature is properly adjusted.

Push down the indexer and disk to cover the splines after the

temperature is adjusted. Ensure that the disk is fully snapped into

the indexer.

Push the valve stem down onto the stop tab. The water will turn

off.

Screw

O-Ring

Plug Button

Valve Stem

Top Disc

Indexer

Splines

Handle

Bonnet

Stop Tab

Mounting Nut

114681-2-BC 8 Kohler Co.

Guide d’installation

Robinets d’évier de cuisine

Outils et matériels

Merci d’avoir choisi la compagnie Kohler

Nous apprécions votre engagement envers la qualité Kohler. Veuillez

prendre s’il vous plaît quelques minutes pour lire ce manuel avant de

commencer l’installation. Ne pas hésiter à nous contacter en cas de

problème d’installation ou de fonctionnement. Nos numéros de

téléphone et adresse internet sont au verso. Merci encore d’avoir choisi

la compagnie Kohler.

Avant de commencer

Respecter tous les codes de plomberie et de bâtiment locaux.

Couper les alimentations d’eau.

Vériﬁer avec soin si l’évacuation ou les tubes d’alimentation pour

déceler tout signe d’endommagement et remplacer si nécessaire.

Pour de nouvelles installations, installer le robinet sur l’évier

avant d’installer ce dernier.

Avant l’installation, déballer le nouveau robinet et l’examiner

pour en déceler tout dommage. Remettre le robinet dans son

emballage de protection jusqu’à être prêt à l’installation.

Mastic

d'étanchéité Clé à molette Clés

hexagonales

Kohler Co. Français-1 114681-2-BC

Avant de commencer (cont.)

Kohler Co. se réserve le droit d’apporter toutes modiﬁcations au

design des robinets et ceci sans préavis, comme spéciﬁé dans le

catalogue des prix.

114681-2-BC Français-2 Kohler Co.

Andere Handbücher für Coralais K-15177

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Kohler Sanitärprodukte Handbücher

Kohler

Kohler TaskSink K-3319 Bedienungsanleitung

Kohler

Kohler Kumin K-103K36-SANA-CP Bedienungsanleitung

Kohler

Kohler Iron Works K-2822 Bedienungsanleitung

Kohler

Kohler KARAT K-17555 Bedienungsanleitung

Kohler

Kohler MAXISPACE 2.0 K-24369X Bedienungsanleitung

Kohler

Kohler K-16250 Montageanleitung

Kohler

Kohler K-18829 Montageanleitung

Kohler

Kohler K-14620 Montageanleitung

Kohler

Kohler K-7128 Montageanleitung

Kohler

Kohler FOLIO K-2017IN-1 Bedienungsanleitung

Kohler

Kohler K-T395 Montageanleitung

Kohler

Kohler K-6854 Montageanleitung

Kohler

Kohler 13EOZD Bedienungsanleitung

Kohler

Kohler K-14663 Montageanleitung

Kohler

Kohler Refinia K-T5324 Montageanleitung

Kohler

Kohler K-8211 Montageanleitung

Kohler

Kohler Devonshire K-TS395-4S Bedienungsanleitung

Kohler

Kohler Purist K-T14428 Bedienungsanleitung

Kohler

Kohler K-6881 Montageanleitung

Kohler

Kohler K-6536 Bedienungsanleitung

Kohler

Kohler K-1154-HC Kurzanleitung

Kohler

Kohler K-2829 Bedienungsanleitung

Kohler

Kohler K-1002-H2 Bedienungsanleitung

Kohler

Kohler K-T195 Montageanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung

Sanela

Sanela SLVN 07 Bedienungsanleitung

Glacier bay

Glacier bay DORIND HD67478W-6001 Montageanleitung

Sterling Plumbing

Sterling Plumbing C741 Bedienungsanleitung