Kohler SUMMON K-24147T-7 Handbuch

SUMMON

INSTALLATION & OPERATING INSTRUCTIONS

SENSOR FACEPLATE(AC, W/ MUSIC)

()

K-24147T-7

-1-

KOHLER CHINA INVESTMENT CO., LTD NO.158, JIANG CHANG SAN ROAD,

JING'AN DISTRICT, SHANGHAI, PRC POST CODE: 200436

( ) 158 200436

2019

BEFORE YOU BEGINBEFORE YOU BEGIN

PRODUCT SPECIFICATIONS AND FUCTION SETUPPRODUCT SPECIFICATIONS AND FUCTION SETUP

Read installation guide in illustration and word file

carefully, and install the tank according to instructions in

the guide to avoid product damage and installation

inconvenience caused by inappropriate operation.

All data contained is based upon the last product

information available at the time of publication. Kohler

Company reserves the right to implement changes of

product characteristics, packaging and availability at any

time without further notice.

Do not apply erosive cleanser and solvent in the tank,

which will damage tank spares and result in leakage in the

tank. Kohler will not be responsible for any damage

related to above mentioned cleanser or solvent.

Do not apply spares that are not provided by Kohler, and

please note that glass adhesive tape shall not be applied

to the installation of Kohler spares. Kohler will not be

responsible for any damage related to installation with

spares not provided by Kohler.

Region/

SKU number/SKU

Rated voltage/

Rated operational voltage/

Maximum instantaneous power/

Outer dimension of product/ (L*W)

Weight of product/

Ambient temperature of usage/

Flush control board LED light color/LED

Entry induction distance/

Exit induction distance/

Entry Induction time/

Exit induction time/

Automatic full flush induction time/

Full flush wave induction time/

Music on/off induction time/ /

Music on/off/

Automatic half flush induction time/

Half flush wave induction time/

Cleaning mode/

Night light switch/

China/

K-24147T-7

220V-240V~, 50/60 Hz / 6V 10%

225mm 160mm (Length x Width) X

About/ 1.7 Kg

1-55 C°

White 6000K color temperature/ 6000K

700mm 50mm

900mm 50mm

3~8s

60s

0.3s

Quick press M key

8~60s

0.3s

Quick press L key

Quick press R key

1385914-T01-A

-2-

ROUGHING-IN

PACKAGING LISTPACKAGING LIST

UNIT : mm

Kohler reserves the right to change marked dimensions without prior notice.

Reference Value

225 0.5

160 0.5

6 0.5

54 0.5

60 0.5

2 core male connector cable to connect power

3 core female connector cable to conncet air pump

S/No. Material No. Material Description

English

Material Description

Chinese Unit

1348781

1348693

1385914-T01

1385914-T8

1407652

1407650

1348733

1385767

1385768

1385769

Faceplate Body

AC Glass Cover Assy

Installation Instruction

Service Parts Page

Pump Control Module Assy

Transformer Assy

220V

Carton Individual

Fixed tube pack

Fixation plate pack

Anti-theft Screw Pack

220V

1pc

1set

A: Transformer Installation

Warning:

Before the in wall tank is installed, the transformer is installed

on the wall first. (It is recommended to place transformers on

the ceiling or other hidden and easy to operate places.) As

illustrated, the output connector of transformer (with 2 core

female connector) through the bushing pipe (the bushing pipe

dia. 16~ 20 is recommended) into water tank. Connect

the input terminal of transformer(black) with power supply

220V AC. Customer can use the PVC pipe for wiring. See

figure

Don't mistake the input and output terminal,

or it may cause damage to the product. Insulation

measures must be taken at the connection. Otherwise,

short-circuit current may occur and damage the

transformer.

(2 )

16~ 20mm)

AC220V

Output AC 6V

AC6V

Input AC 220V (Black)

AC220V ( )

Transformer Assy.

Ceiling

Bushing Pipe

Low-voltage AC

Transformer Output

Connector (In Tank)

()

1385914-T01-A

-3-

2. Install pump control module assembly to faceplate body,

connect emergency flush air hose to outlet pipe in air

cyclinder. Connect output signal cable and input signal

cable together, and tighten nut. See figure

B: Faceplate Installation

1. After the transformer and the circuit are properly connected,

the in wall tank is installed according to the installation

instructions until the construction of the false wall in front of

the water tank is completed.

4. When tighten four locknuts on faceplate body, adjust to

"OPEN" mark as shown. See figure

5. Tighten four fixed tubes to "LOCK" mark after installing

faceplate body as shown. See figure

3. Connect big flush air hose and half flush hose to outlet joint

in pump control module assembly. Connect power output

cable of transformer and power input cable of faceplate

body together, and tighten nut. See figure

Note: Cut the excessive parts of air hose if necessary

and fix it onto the tank fastener.

OPEN

5. LOCK

Emergency Flush

Air Hose

Input Signal Cable

Output Signal Cable

Pump Control Module Assembly

Air Cyclinder

Half Flush

Full FlushManual Flush

Transformer Power

Output Cable

Faceplate Power Input Cable

Full Flush Air Hose

Half Flush Air Hose

Fixed Tube

Faceplate Body

1385914-T01-A

-4-

8. The installation of pinch plate, the pinch plate installation

provides another method for faceplate, that is, the

faceplate don't rely on the position of the in wall tank and

the mask, and can directly install the faceplate to the false

wall. The location of faceplate to refer the 1 meter high

from the finished floor to center of faceplate is

recommended. 7~20mm thickness is recommended for the

wall of the pinch plate and recommended 80 3mm gap is

reserved. Recommended the installation hole size of

201 X 136 mm. See figure

7. Assemble glass cover assembly on faceplate. Insert fixed

tapes into the faceplate holes. See figure

7~20mm 80

3mm 201 X 136 mm

0+2

Recommend 80 3mm gap reserved

80 3mm

Air Hose

Pinch Plate

Finished Wall

7~20mm Recommended

7~20mm

201

136

6. Fix two anti-theft screws on faceplate body with screw

driver against easily taking away faceplate. See figure

Anti-theft Screw

Glass Cover Assembly

Fixed Tape

Power Cable

478 3

438 3

Height Suggested/ 1150

1098 4

1066 4

1048 4

269 5

100 3

35 2

Finished Floor

52~230

230 3

180 3

205 3 681 4

1385914-T01-A

-5-

9. Recommend 1.1m distance at least between door and

faceplate. Otherwise it may cause wrong flush.

9. 1.1m

Recommend 1.1m distance at least

between door and faceplate.

1.1m

1385914-T01-A

Inhaltsverzeichnis

Andere Kohler Sanitärprodukte Handbücher

Kohler

Kohler K-498 Montageanleitung

Kohler

Kohler K-704310 Montageanleitung

Kohler

Kohler K-168 Bedienungsanleitung

Kohler

Kohler Clearflo K-7147 Bedienungsanleitung

Kohler

Kohler K-4986X Montageanleitung

Kohler

Kohler K-1112 Montageanleitung

Kohler

Kohler K-18494 Montageanleitung

Kohler

Kohler K-72218 Bedienungsanleitung

Kohler

Kohler EX28096T-4 Bedienungsanleitung

Kohler

Kohler K-T13133 Bedienungsanleitung

Kohler

Kohler Escale 19046W Bedienungsanleitung

Kohler

Kohler K-T6808 Bedienungsanleitung

Kohler

Kohler K-1110-G Kurzanleitung

Kohler

Kohler K-18865 Montageanleitung

Kohler

Kohler VINTAGE K-7158 Bedienungsanleitung

Kohler

Kohler K-15635 Bedienungsanleitung

Kohler

Kohler PINOIR K-2015 Montageanleitung

Kohler

Kohler K-T9474 Bedienungsanleitung

Kohler

Kohler K-994 Bedienungsanleitung

Kohler

Kohler K-10217 Bedienungsanleitung

Kohler

Kohler K-26228T Bedienungsanleitung

Kohler

Kohler K-158 Bedienungsanleitung

Kohler

Kohler Singulier K-T10449 Montageanleitung

Kohler

Kohler K-704212 Montageanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung

Sanela

Sanela SLVN 07 Bedienungsanleitung

Glacier bay

Glacier bay DORIND HD67478W-6001 Montageanleitung

Sterling Plumbing

Sterling Plumbing C741 Bedienungsanleitung