Leica IMS500 Bedienungsanleitung

Leica IMS500

Leica IMS500 HD

Manual

Ryf AG

Bettlachstrasse 2

2540 Grenchen

tel 032 654 21 00

fax 032 654 21 09

www.ryfag.ch

Leica IMS500 / IMS500 HD Manual 2

Contents

Safety regulations 3

Safety concept 4

Symbols used in this operating manual 4

Important Notes 5

Instructions on use 6

Information for the person responsible for the instrument 7

Care instructions 8

Accessories, maintenance and repair 9

Electrical data and ambient conditions 10

Unpacking 10

Installation! 11

IMS500 – Installation Basic Systems with Computers 12

IMS500 – Installation Advanced Systems with Computers

and remote control USB 13

IMS500 HD - Installation Basic System without Computers 14

Quick Start! 15

Keypad functions 16

Additional Keypad functions for IMS500 Advanced

Systems with computers and remote control 18

Instructions for the Wireless Tablet Control Option 19

Layout Creator 24

Close 29

Speciﬁcations IMS500 30

Speciﬁcations IMS500 HD 31

Leica IMS500 / IMS500 HD Manual 3

Safety regulations

Leica IMS500 / IMS500 HD Manual 4

Safety concept

This operating manual describes the special functions of the

individual modules of the Leica IMS500 Systems Interactive

Microscopy System and contains important instructions for

their operational safety, maintenance, and accessories.

You can combine individual system articles with articles

from external suppliers. Please read the user manual and

the safety requirements of the supplier.

Before installing, operating or using the system, read the

user manual. In particular, please observe all safety instruc-

tions.

To maintain the unit in its original condition and to ensure

safe operation, the user must follow the instructions and

warnings contained in the user manual.

Additional information about other instruments from Leica

Microsystems Ltd. can be found online at

www.leica-microsystems.com.

The "Safety concept" booklet contains additional safety

information regarding the service work, requirements

and the handling of microscope, accessories and electrical

accessories as well as general safety instructions.

Symbols used in this operating manual

Warning of a danger

This symbol indicates especially important infor-

mation that must be read and complied with.

Failure to comply can cause the following:

OHazards to personnel

OFunctional disturbances or damaged instruments

Warning of hazardous electrical voltage

This symbol indicates especially important infor-

mation that is mandatory to read and observe.

Failure to comply can cause the following:

OHazards to personnel

OFunctional disturbances or damaged instruments

Danger due to hot surface.

This symbol warns against touching accessible hot

surfaces, e.g. those of light bulbs.

Important information

This symbol indicates additional information or

explanations that intend to provide clarity.

Explanatory notes

fThis symbol within the text points to additional infor-

mation and explanations.

Leica IMS500 / IMS500 HD Manual 5

Important Notes

Description

The Leica IMS500 Systems meets today's state of the art

of technology. Nevertheless, hazards may still arise during

operation.The potential risks are described below.

Before installing, operating or using the instru-

ments, it is required to read this user manual. In

particular, please observe all safety instructions.

Contact address

Leica Microsystems (Switzerland) Ltd.

Industry Division

Max Schmidheiny Strasse 201

CH-9435 Heerbrugg (Switzerland)

User Manual

This user manual includes important instructions related to

operating safety, maintenance and accessories.

Your Leica IMS500 Systems comes with a printed

manual. Keep it in a safe place, and readily acces-

sible to the user. User manuals and updates are also avail-

able for you to download and print from our web site at

www.leica-microsystems.com

Produced for Leica Microsystems from

EBS

Euchner Büro- und Schulsysteme GmbH

Ernst-Leitz-Strasse 3

DE-63150 Heusenstamm

Accessories from third-party suppliers

You can combine individual system articles with articles

from external suppliers. Please read the user manual and

the safety requirements of the supplier.

Original condition

To maintain the unit in its original condition and to ensure

safe operation, the user must follow the instructions and

warnings contained in these user manuals.

Legal requirements

Adhere to general and local regulations relating to accident

prevention and environmental protection.

EC Declaration of Conformity

Electrically operated accessories are constructed based on

the state of the art of technology and are provided with an

EC Declaration of Conformity.

Leica IMS500 / IMS500 HD Manual 6

Instructions on use

Intended use

The Leica IMS500 Systems Interactive Microscopy System is

for allowing theTeacher to select which microscope images

will be shared with himself, other students, or a projector.

Position the Leica IMS500 Systems so that it can be

disconnected from the power supply at any time.

The power cord must remain accessible at all times, because

the power supply is foreseen as mains disconnecting device.

Place of use

Only use the system in closed, dust free rooms and

between +10 °C and +40 °C. Protect the devices from

oil, chemicals and extreme humidity. Never use electri-

cal devices outdoors. Install electrical devices at least 10

cm from the wall and away from ﬂammable substances.

Avoid large temperature ﬂuctuations, direct

sunlight and vibrations.

Non-intended use

 Using the system in any way contrary to the speci-

ﬁcations in the user manual can lead to bodily harm and

damage to objects. Doing so can impair the functions of the

protective measures provided.

Only use one of the following power cords*.

Don´t unscrew any mechanical components

unless expressly instructed to do so in the instructions.

The devices and accessories described in this

operating manual have been tested for safety and

potential hazards.

The responsible Leica aﬃliate must be consulted

whenever the instrument is altered, modiﬁed or

used in conjunction with non-Leica components that are

outside of the content of this manual.

Unauthorized alterations to the device or

noncompliant use shall void all rights to any

warranty claims.

Transport

If at all possible, use the original packaging for shipping or

transporting individual modules.

In order to prevent damage from vibrations, disassemble

all moving parts that (according to the user manual) can

be assembled and disassembled by the customer and pack

them separately.

Disposal

Disposal must comply with locally applicable laws and

regulations.

Integration in third-party products

When installing Leica products into third-party products,

the manufacturer of the complete system or its dealer is

responsible for following all applicable safety instructions,

laws and guidelines.

* Power Cords

10280636 Power cable, 2.5 m, Switzerland

10445661 Power cable, 2 m, USA

10445662 Power cable, 2 m, EURO

10445663 Power cable, 2m-2.5 m,BS

10447346 Power cable, 2 m, Japan

10450012 Power cable, 2 m, Argentina type K

10450013 Power cable, 2m, Australia type F

10450014 Power cable, 2m, China type L

10450015 Power cable, 2m, Israel type I

10450016 Power cable, 2m, Italy type E

10450017 Power cable, 2 m, South Africa type D

Leica IMS500 / IMS500 HD Manual 7

Information for the person responsible for the instrument

Information for the person responsible for the instru-

ment

OEnsure that the Leica IMS500 Systems system is used

only by qualiﬁed personnel.

OEnsure that this user manual is always available.

OCarry out regular inspections to make certain that the

authorized users are adhering to safety requirements.

OWhen instructing new users, do so thoroughly and

explain the meanings of the warning signs and

messages.

OAssign individual responsibilities for starting, oper-

ating and servicing the instrument and monitor the

observance of these responsibilities.

ODo not use the Leica IMS500 Systems system unless it

is in perfect condition.

OInform your Leica representative or Leica Microsystems

(Schweiz) AG, Industry Division, 9435 Heerbrugg,

Switzerland, immediately of any product defect that

could potentially cause injury or harm.

OIf you use accessories made by third-party manu-

facturers with the Leica IMS500 Systems system, be

sure that each such manufacturer conﬁrms that the

combination is safe to use and observe the product's

user manual.

OModiﬁcations and maintenance of the Leica IMS500

Systems system may only be performed by profes-

sionals expressly authorized by Leica.

OOnly original Leica replacement parts may be used in

servicing the product.

OAfter service work or technical modiﬁcations, the unit

must be reconﬁgured with observance to our technical

requirements.

OIf the unit is modiﬁed or serviced by unauthorized

persons, is improperly maintained (as long as main-

tenance was not carried out by us), or is handled

improperly, Leica will not accept any liability.

OThe electric installation in the building must conform

to the national standard, e.g. current-operated

ground leakage protection (fault-current protection)

is suggested.

Leica IMS500 / IMS500 HD Manual 8

Care instructions

General instructions

OProtect the Leica IMS500 Systems against damp,

vapors, acids, alkalis, and corrosive substances. Do

not store chemicals in the vicinity. Protect the Leica

IMS500 Systems from oil and grease.

OIt is advisable to enter a service agreement with Leica

Service.

Cleaning coated parts and plastic parts

ODust and dirt particles should be removed with a soft

brush or lint-free cotton cloth.

ORemove coarse debris with a moistened disposable

cloth.

OClinging dirt can be removed using petroleum ether

or alcohol.

OAcetone, xylene or nitro-containing thinners must

NOT be used.

ONever use chemicals to clean colored surfaces or acces-

sories with rubberized parts. This could damage the

surfaces, and specimens could be contaminated by

abraded particles.

Leica IMS500 / IMS500 HD Manual 9

Accessories, maintenance and repair

Accessories

Only the following accessories may be used with the Leica

IMS500 Systems:

OThe Leica accessories described in this user manual.

OOther accessories, provided that these have been

expressly approved by Leica as being technically safe

in this context.

Maintenance

OThe Leica IMS500 Systems are basically maintenance-

free. To ensure that it always operates safely and reli-

ably, we recommend that you take the precaution of

contacting the responsible service organization.

You can arrange for periodic inspections or, if

appropriate, conclude a maintenance contract with

them.

OIt is advisable to enter a service agreement with Leica

Service.

OFor maintenance and repair, only OEM spare parts may

be used.

Repairs and service work

OOnly original Leica Microsystems spare parts may be

used.

OBefore opening the instruments, switch oﬀ the power

and unplug the power cable.

OAvoid contact with powered electrical circuits, which

can lead to injury.

Service address

In case of problems, please contact us as follows:

Leica Microsystems (Switzerland) Ltd.

Industry Division

Max Schmidheiny Strasse 201

CH-9435 Heerbrugg (Switzerland)

Phone +41 71 726 33 28

Leica IMS500 / IMS500 HD Manual 10

Electrical data and ambient conditions

Electrical data

See speciﬁcations page

Environment

Temperature for use +10 °C … +40 °C

Storage temperature -20 °C … +52 °C

+50 °F … +104 °F

Manipulation shock 25 mm on 50 mm hard wood

Transport shock (unpacked) 80 g / 6 ms

Transport shock (packed) 800 mm free fall

Transport vibrations (unpacked 5–200 Hz / 1.5 g

Atmospheric pressure "in use" and for storage: 500–1060 mBar

Humidity“in use”and for storage: 20–90%

Installation Category II (Overvoltage Category)

Pollution degree 2

Unpacking

OCarefully remove the system and any components

from the packing carton.

OCheck the components against the planned conﬁgura-

tion.

OOptional items such as camera adapters, cameras, and

carrying cases are not shipped as part of the standard

equipment. These items are delivered in separate

packages.

OPlease do not discard any of the packing materials.

They should be used for safely storing and transport-

ing the instrument should the need arise.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Leica Mikroskop Handbücher

Leica

Leica ICC50 W Bedienungsanleitung

Leica

Leica FSC Bedienungsanleitung

Leica

Leica Emspira 3 Bedienungsanleitung

Leica

Leica Stellaris 5 Bedienungsanleitung

Leica

Leica BF200 Bedienungsanleitung

Leica

Leica M500 OH3 Bedienungsanleitung

Leica

Leica SP2 Bedienungsanleitung

Leica

Leica DMS300 Bedienungsanleitung

Leica

Leica SP5C Bedienungsanleitung

Leica

Leica Z6 APO Bedienungsanleitung

Leica

Leica M125 Bedienungsanleitung

Leica

Leica EZ5 Bedienungsanleitung

Leica

Leica DM2700 M Bedienungsanleitung

Leica

Leica Sp5 WLL STED Betriebsanleitung

Leica

Leica DM750 M Bedienungsanleitung

Leica

Leica DM3 XL Bedienungsanleitung

Leica

Leica DMI4000B Bedienungsanleitung

Leica

Leica ARveo Bedienungsanleitung

Leica

Leica WILD M690 Bedienungsanleitung

Leica

Leica SP5 confocal Bedienungsanleitung

Leica

Leica WILD M695 Bedienungsanleitung

Leica

Leica TCS SP5 X Bedienungsanleitung

Leica

Leica S Series Bedienungsanleitung

Leica

Leica DMi8 A Bedienungsanleitung

Beliebte Mikroskop Handbücher anderer Marken

Thermo Scientific

Thermo Scientific Nicolet iN10 Leitfaden

National

National DC3-163 Bedienungsanleitung

KERN Optics

KERN Optics OPE-1 Bedienungsanleitung

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Bedienungsanleitung

Prior

Prior Lux POL Bedienungsanleitung

Opitec

Opitec Smartscoop 115615 Bedienungsanleitung

KERN

KERN OPO-1 Bedienungsanleitung

Topcon

Topcon SP-1P Bedienungsanleitung

Motic

Motic PA43 Bedienungsanleitung

MshOt

MshOt MZ62 Bedienungsanleitung

KERN Optics

KERN Optics OZR-5 Bedienungsanleitung

VWR

VWR VisiScope 384 Series Bedienungsanleitung

Nikon

Nikon ECLIPSE E200 POL Bedienungsanleitung

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

Olympus

Olympus SZ61 Bedienungsanleitung

AO Cycloptic Bedienungsanleitung

Celestron

Celestron 44345 Bedienungsanleitung