Leica S Series Bedienungsanleitung

Leica S Series

User Manual

S Series User Manual 2

General Instructions

Safety concept

Before using your stereo microscope for the ﬁrst

time, please read the "Safety Concept" booklet

included with your instrument. It contains

additional information about handling and

care.

About cleaning

ODo not use any unsuitable cleaning agents,

chemicals or techniques for cleaning.

ONever use chemicals to clean colored

surfaces or accessories with rubberized

parts. This could damage the surfaces,

and specimens could be contaminated by

abraded particles.

Servicing

ORepairs may only be carried out by Leica

Microsystems-trained service technicians.

Only original Leica Microsystems spare

parts may be used.

Responsibilities of person in charge of

instrument

OEnsure that the Leica stereo microscope

is operated, maintained and repaired by

authorized and trained personnel only.

S Series User Manual 3

Important Safety Notes

User manual

User manuals and updates are available for

you to download and print from our website

www.leica-microsystems.com. Keep it in a safe

place, and readily accessible to the user.

This user manual describes the special

functions of the Leica stereo microscopes

(S series) and contains important instructions

for their operational safety, maintenance, and

accessories.

The "Safety Concept" booklet contains

additional safety information regarding the

service work, requirements and the handling

of the stereo microscope, accessories and

electrical accessories as well as general safety

instructions.

You can combine individual system articles

with articles from external suppliers (e.g. cold

light sources, etc.). Please read the user manual

and the safety requirements of the supplier.

Before installing, operating or using the

instruments, read the user manuals listed

above. In particular, please observe all safety

instructions.

To maintain the unit in its original condition

and to ensure safe operation, the user must

follow the instructions and warnings contained

in these user manuals.

S Series User Manual 4

Symbols Used

Warning of a danger

This symbol indicates especially

important information that is mandatory

to read and observe.

Failure to comply can cause the following:

OHazards to personnel

OFunctional disturbances or damaged

instruments

Warning of hazardous electrical voltage

This symbol indicates especially

important information that is

mandatory to read and observe.

Failure to comply can cause the following:

OHazards to personnel

OFunctional disturbances or damaged

instruments

Danger due to hot surface

This symbol warns against touching hot

surfaces, e.g. those of light bulbs.

Important information

This symbol indicates additional

information or explanations that intend

to provide clarity.

Explanatory notes

OThis symbol within the text stands for

additional information and explanations.

Figures

(1) Numbers in parentheses within the

descriptions relate to the ﬁgures and the

items within those ﬁgures.

S Series User Manual 5

Safety Instructions

Description

The individual modules fulﬁll the highest

requirements for observation and

documentation of Leica stereo microscopes of

the S series.

Intended use

ORefer to "Safety Concept" booklet

Non-intended use

ORefer to "Safety Concept" booklet

Never use S series microscopes or their

components for surgical procedures (e.g. on

the eye) unless they are speciﬁcally intended

for that purpose.

The devices and accessories described in this

User Manual have been tested with regard to

potential hazards. The responsible Leica aﬃliate

must be consulted whenever the instrument is

altered, modiﬁed or used in conjunction with

non-Leica components that are outside of the

scope of this manual!

Unauthorized alterations to the instrument or

noncompliant use shall void all rights to any

warranty claims!

Place of use

ORefer to "Safety Concept" booklet

OElectrical components must be placed at

least 10 cm away from the wall and from

ﬂammable substances.

OAvoid large temperature ﬂuctuations,

direct sunlight and vibrations. These

conditions can distort measurements * and

micrographic images.

OIn warm and warm-damp climatic zones,

the individual components require special

care in order to prevent the build-up of

fungus.

* Measurement results depend on used

objective, zoom and microscope settings.

Responsibilities of person in charge of

instrument

ORefer to "Safety Concept" booklet

Ensure that:

OThe S series stereo microscopes and

accessories are operated, maintained

and repaired by authorized and trained

personnel only.

OAll operators have read, understood and

observe this User Manual, and particularly

the safety instructions.

S Series User Manual 6

Safety Instructions (Continued)

Repairs, service work

ORefer to "Safety Concept" booklet

OOnly original Leica Microsystems spare

parts may be used.

OBefore opening the instruments, switch oﬀ

the power and unplug the power cable.

Touching the live circuit can cause

injury.

Transport

OUse the original packaging for shipping

or transporting the individual modules

of the Leica S stereo microscopes and the

accessory components.

OIn order to prevent damage from

vibrations, all moving parts that (according

to the user manual) can be assembled and

disassembled by the customer should be

disassembled and packed separately.

Integration in third-party products

ORefer to "Safety Concept" booklet

Disposal

ORefer to "Safety Concept" booklet

Legal regulations

ORefer to "Safety Concept" booklet

EC Declaration of Conformity

ORefer to "Safety Concept" booklet

S Series User Manual 7

Safety Instructions (Continued)

Health risks

•Workplaces with stereo microscopes

facilitate and improve the viewing task,

but they also impose high demands on the eyes

and holding muscles of the user. Depending on

the duration of uninterrupted work, asthenopia

and musculoskeletal problems may occur. For

this reason, appropriate measures for reduction

of the workload must be taken:

OOptimal arrangement of workplace, work

assignments and work ﬂow (changing tasks

frequently).

OThorough training of the personnel,

giving consideration to ergonomic and

organizational aspects.

OThe ergonomic optical design and

construction of the Leica S stereo

microscopes are intended to reduce the

exertion of the user to a minimum.

•Direct contact with eyepieces is a

potential transmission method for

bacterial and viral infections of the eye.

The risk can be kept to a minimum by using

personal eyepieces for each individual or

detachable eyecups.

S Series User Manual 8

General Instructions 2

Important Safety Notes 3

Symbols Used 4

Safety Instructions 5

Contents 8

Leica S Series

Congratulations! 11

The Modular Design: Everything is Possible 12

What Your Stereo Microscope has to Oﬀer you 13

Microscopes of the S Series 14

On We Go 15

Assembly

Installing the Basic Equipment (Overview) 17

Focusing Column 18

Sub-base for Transmitted Light and Cold Light Source 19

Optics Carrier and Additional Objective 20

Available Graticules 21

Inserting Graticules 22

Eyepieces 23

Leica LED Illumination 24

Camera Design (Leica S9 D and S APO) 25

Quick Start Guide

An Overview of a S Series Stereo Microscope 27

Using the Eyepieces 28

The Correct Interpupillary Distance 29

Focusing 30

Changing Magniﬁcation (Zooming) 31

Limiting Zoom Range 32

Regulating the Resistance of the Focusing Drive 34

Changing the Position of the Optics Carrier 35

Diopter Settings and Parfocality: 1 Adjustable & 1 Fixed Eyepiece 36

Dioptric Correction With two Adjustable Eyepieces 39

Connectivity of the S9 i Stereo Microscope With Integrated Camera 42

The S9 i With Integrated Camera 43

S9 i: Overview 44

Get Set!

USB Mode – Capturing and Adjusting Images Using a Computer 46

HDMI Mode – Capturing Images Without a Computer orWithout aWireless

Device 48

Adjusting Settings While in SD Mode 50

Ethernet Mode – Capturing and Adjusting Images Using a Network 51

Contents

S Series User Manual 9

Extend!

How to Install the Coded Zoom 53

Installation of the Coded Zoom in LAS X 55

The Camera Remote Control

Optional Remote Control 58

Viewing Images and Movies With the Optional Remote Control 59

Calling up the Camera Menu 60

COLOR (Automatic White Balance) 61

COLOR (Manual White Balance) 62

EXPOSURE 63

RESOLUTION 64

SETUP CAMERA (Camera Settings) 65

SETUP USER 66

SETUP ETHERNET 67

Pairing Cameras With Remotes 69

Photography & Video

Photography & Video 71

Photography With the Leica S9 D and S APO 72

Dimensional Drawings in mm

Leica S9 E With Incident Light and Transmitted Light Illumination 74

Leica S9 D With Incident Light and Transmitted Light Illumination 75

Leica S9 i With Incident Light and Transmitted Light Illumination 76

Leica S APO With Incident Light and Transmitted Light Illumination 77

Technical Data

Technical Data 79

Appendix

Calculating the Total Magniﬁcation/Field of View Diameter 81

Troubleshooting 82

Contact Persons, Care, Maintenance, Transport 83

Contents

S Series User Manual Leica S Series 10

Leica S Series

Andere Handbücher für S Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Leica Mikroskop Handbücher

Leica

Leica ATC 2000 Bedienungsanleitung

Leica

Leica DMi8 Bedienungsanleitung

Leica

Leica MC120 HD Bedienungsanleitung

Leica

Leica ICC50 E Bedienungsanleitung

Leica

Leica DMI6000B Bedienungsanleitung

Leica

Leica DMIRE2 Bedienungsanleitung

Leica

Leica DMIL Bedienungsanleitung

Leica

Leica BF200 Bedienungsanleitung

Leica

Leica MicroStar IV Bedienungsanleitung

Leica

Leica FSC Bedienungsanleitung

Leica

Leica DM IRM Bedienungsanleitung

Leica

Leica M60 B Bedienungsanleitung

Leica

Leica DVM5000 Benutzerhandbuch

Leica

Leica DMi1 Handbuch

Leica

Leica S7 E Bedienungsanleitung

Leica

Leica ARveo Bedienungsanleitung

Leica

Leica SP8 AT CIAN Stücklistenhandbuch

Leica

Leica SP2 Bedienungsanleitung

Leica

Leica DM LSP Bedienungsanleitung

Leica

Leica K3C Bedienungsanleitung

Leica

Leica DMi1 Bedienungsanleitung

Leica

Leica TCS SP2 Referenzhandbuch

Leica

Leica BF200 Bedienungsanleitung

Leica

Leica FluoCombi III Bedienungsanleitung

Beliebte Mikroskop Handbücher anderer Marken

Thermo Scientific

Thermo Scientific Nicolet iN10 Leitfaden

National

National DC3-163 Bedienungsanleitung

KERN Optics

KERN Optics OPE-1 Bedienungsanleitung

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Bedienungsanleitung

Prior

Prior Lux POL Bedienungsanleitung

Opitec

Opitec Smartscoop 115615 Bedienungsanleitung

KERN

KERN OPO-1 Bedienungsanleitung

Topcon

Topcon SP-1P Bedienungsanleitung

Motic

Motic PA43 Bedienungsanleitung

MshOt

MshOt MZ62 Bedienungsanleitung

KERN Optics

KERN Optics OZR-5 Bedienungsanleitung

VWR

VWR VisiScope 384 Series Bedienungsanleitung

Nikon

Nikon ECLIPSE E200 POL Bedienungsanleitung

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

Olympus

Olympus SZ61 Bedienungsanleitung

AO Cycloptic Bedienungsanleitung

Celestron

Celestron 44345 Bedienungsanleitung