Leica FSC Bedienungsanleitung

Leica FS C

Operating Manual

Bedienungsanleitung

Manuel d’utilisation

Phone +49 (0) 64 41-29 22 61

Fax +49 (0) 64 41-29 22 55

E-Mail [email protected]

Published 2003 by:

Herausgegeben 2003 von:

Publié en 2003 par:

Leica Microsystems Wetzlar GmbH

Ernst-Leitz-Strasse

D-35578 Wetzlar (Germany)

Responsible for contents:

Verantwortlich für den Inhalt:

Responsable du contenu:

Katja Peter, Karin Schwab

Marketing CM, Compound Microscopy, Product Management,

Marketing CM, Compound Microscopy, Productmanagement,

Marketing CM, Compound Microscopy, Product Management ,

In case of questions, please contact:

Bei Fragen wenden Sie sich bitte an:

Pour toute question, contacter:

Leica FS C

Operating Manual

Copyrights

All rights to this documentation are held by

Leica Microsystems Wetzlar GmbH. Reproduc-

tion of text or illustrations (in whole or in part) by

print, photocopy, microfilm or other method (in-

cluding electronic systems) is not allowed with-

out express written permission from Leica

Microsystems Wetzlar GmbH.

The term “Windows” can be used in the follow-

ing text without further identification. It is a reg-

istered trademark of the Microsoft Corporation.

Otherwise, no inference with regard to the free

usability of product names may be drawn from

the use of those names.

The instructions contained in the following doc-

umentation reflect state-of-the-art technology

and knowledge standards. We have compiled

the texts and illustrations as accurately as pos-

sible. Nevertheless, no liability of any kind may

be assumed for the accuracy of this manual’s

contents. Still, we are always grateful for com-

ments and suggestions regarding potential mis-

takes within this documentation.

The information in this manual is subject to modi-

fication at any time and without prior notification.

Contents

1. Important Notes about this Manual ...... 6

2. Safety Notes ............................................... 7

2.1. General Safety Notes ............................... 7

2.2. Electrical Safety ........................................ 7

2.3 Weights ....................................................... 7

3. Field of Application .................................. 9

4. Installation Site ......................................... 10

5. Unpacking the Macroscope ................... 11

6. Overview of the Instrument .................... 13

7. Assembly .................................................... 14

7.1 Comparison Bridge ................................... 14

7.2 Illumination ................................................. 14

7.3 Eyepieces.................................................... 18

7.4 Objectives ................................................... 18

7.5 Cabling ......................................................... 19

8. Operation .................................................... 21

8.1 Switching on the Macroscope ............... 21

8.2 Stages .......................................................... 22

8.3 Tube ............................................................ 22

8.4 Eyepieces.................................................... 23

8.5 Brightness Setting..................................... 23

8.6 Focusing ...................................................... 23

8.7 Objectives ................................................... 24

8.8 Magnification Changer............................. 24

8.9 Diaphragm Setting .................................... 24

8.10 The Smart Move Control Panel............... 25

8.11 Adjusting the Height of the Stand .......... 25

8.12 Magnification Calibration ........................ 25

8.13 Oblique Incident Illumination .................. 26

8.14 Coaxial Incident Illumination................... 26

8.15 Transmitted Light Illumination................. 28

8.16 UV Illumination ........................................... 29

9. Accessories ............................................... 30

9.1 Motorized Work Table .............................. 30

9.2 Stackable Stages ...................................... 31

9.3 Slide Holder ................................................ 33

9.4 Rotating Mechanism for

Toolmark Examination .............................. 41

9.5 Light Panel .................................................. 41

9.6 Filter for Color Contrast ............................ 42

9.7 Polarization Devices ................................. 43

9.8 Stage Scales

and Calibration Standard ......................... 44

10. Technical Data ......................................... 45

11. Care of the Comparison Macroscope .... 48

11.1 Dust Cover .................................................. 48

11.2 Cleaning....................................................... 48

11.3 Handling Acids and Alkalines ................. 49

12. Wear and Spare Parts .............................. 50

13. EU Declaration of Conformity................. 51

1. Important Notes about this Manual

(1.2)

→ page 20

Numbers in parentheses such as (1.2), corre-

spond to illustrations (in the example, Figure 1,

Item 2).

Numbers with pointer arrows (for example

→ page 20), point to a certain page of this manual.

Special safety instructions are indicated

with the triangle symbol shown here, and

have a gray background.

Caution! The macroscope and accessories can

be damaged when operated incorrectly.

Danger due to hot surface.

Explanatory note.

Item not contained in all configurations.

Text symbols and their meanings:

Caution!

This operating manual is an essential com-

ponent of the Leica FS C Comparison Macro-

scope, and must be read carefully before the

macroscope is put into operation or used.

1. Important Notes about this Manual

This operating manual contains important in-

structions and information for the operational

safety and maintenance of the comparison mac-

roscope and accessories. Therefore, it must be

kept and taken care of.

2. Safety Notes

2.2. Electrical Safety

General Specifications

For indoor use only.

Supply voltage:

Frequency:

Power input:

Fuse (power supply):

Fuse (power pack):

Ambient temperature:

Relative humidity:

Overvoltage category:

Pollution degree:

2.3 Weights

Comparison bridge:

Macro stand with stage:

Motorized work table:

90-250 V~

50-60 Hz

maximum 125 VA

F 6,3 A L 250 V -UL-

T 16 A L 250 V

10-36°C

maximum 80% to 30°C

15 kg

32 kg

50 kg

2.1 General Safety Notes

This safety class 1 device is constructed

and tested in accordance with EN 61010-1/IEC

1010-1, safety regulations for electrical measur-

ing, control, and laboratory devices.

Caution!

In order to maintain this condition and to en-

sure safe operation, the user must follow the

instructions and warnings contained in this

operating manual.

Caution!

The devices and accessories described in

this operating manual have been tested for

safety and potential hazards.

The responsible Leica affiliate or the main

plant in Wetzlar must be consulted whenev-

er the device is altered, modified or used in

conjunction with non-Leica components that

are outside of the scope of this manual.

Unauthorized alterations to the device or

noncompliant use shall void all rights to any

warranty claims!

2. Safety Notes

Caution!

The comparison macroscope’s electrical

accessory components are not protected

against water. Water can cause electric

shock.

Do not assemble the comparison macro-

scope and its accessory components in the

immediate vicinity of a water connection or

other areas where the possibility of water

exposure exists.

Caution!

Protect the comparison macroscope from

excessive temperature fluctuations. Such

fluctuations can lead to the accumulation of

condensation, which can damage the elec-

trical and optical components.

Caution!

Before exchanging the fuses or lamps, be

absolutely certain to switch-off the main

power switch and remove the power cable.

Caution!

The power plug may only be plugged into an

outlet equipped with a grounding contact.

Do not interfere with the grounding function

by using an extension cord without a ground

wire. Any interruption of the ground wire in-

side or outside of the device, or release of

the ground wire connection, can cause the

device to become hazardous. Intentional

ground interruption is not permitted!

Caution!

By connecting them to ground, ancillary de-

vices providing their own and/or separate

power supplies and which are connected to

the comparison macroscope can be con-

nected to the same ground wire potential.

For connections without a ground connec-

tor, Leica Service must be consulted.

Caution!

Never use any fuses as replacements other

than those of the types and the current rat-

ings listed here. Using patched fuses or

bridging the fuse holder is not permitted.

3. Field of Application

Comparisons of small surfaces or profiles need

to be performed with sufficient precision, if the

objects of comparison can be observed simulta-

neously.

If only a macroscope with just one image beam

input is available for such comparisons, then,

depending on the interruption of observation by

a change of objective, high demands are made

on the memory of the observer. Therefore, it is

impossible to rule out incorrect interpretation in

the case of objects with very minor differences

in the surface or profile.

The Leica FS C (Forensic Solution Comparison)

Macroscope with two image beam inputs is de-

signed for comparing structures of items such

as those listed below in split images and com-

posite images in forensic laboratories, docu-

ment printing facilities, mints and banks, and

documenting the results on photographs and

videos:

–Evidence on fired ammunition pieces

–Toolmarks

–Manufacturing traces on adhesive tape

–Playback traces on magnetic tape

–Documents

–Writing samples

–Banknotes

–Stamps

–Coins

–etc.

Illumination equipment are available for incident

light (including UV light) and transmitted light.

4. Installation Site

Caution:

Ensure that the workplace area is free of oil

and chemical fumes. Vibrations, direct sun-

light and strong temperature fluctuations in-

terfere with measurements as well as micro-

photography and image documentation.

The basic prerequisite is a stable instrument ta-

ble of optimum height (70–80 cm). Combined

with an ergonomically correct, adjustable chair,

these are the basic requirements for fatigue-

free microscopy.

Allowable ambient conditions

Temperature 10–36 °C

Relative humidity max. 80% up to 30°C

Macroscopes in warm and warm-damp climatic

zones require special care in order to prevent

the build up of fungus.

For additional instructions, see the chapter enti-

tled “Care of the Comparison Macroscope”

→

page 48.

Caution:

Electrical components must be assembled at

least 10 cm from the wall and away from

flammable substances.

Fig. 1 Leica FS C with adjustable-height work table and

ergonomic working chair

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Leica Mikroskop Handbücher

Leica

Leica DM750 P Bedienungsanleitung

Leica

Leica DM750 M Bedienungsanleitung

Leica

Leica FL800 ULT Bedienungsanleitung

Leica

Leica DVM6 Bedienungsanleitung

Leica

Leica F12 I Bedienungsanleitung

Leica

Leica MATEO TL Bedienungsanleitung

Leica

Leica StereoZoom 7 Bedienungsanleitung

Leica

Leica S Series Bedienungsanleitung

Leica

Leica DM100 Bedienungsanleitung

Leica

Leica SP8 Bedienungsanleitung

Leica

Leica TCS SP8 Bedienungsanleitung

Leica

Leica DMi1 Handbuch

Leica

Leica BF200 Bedienungsanleitung

Leica

Leica A60 F Bedienungsanleitung

Leica

Leica DMIL Bedienungsanleitung

Leica

Leica DM500 Bedienungsanleitung

Leica

Leica EZ4 E Bedienungsanleitung

Leica

Leica SP5C Bedienungsanleitung

Leica

Leica Z6 APO Bedienungsanleitung

Leica

Leica SP5 II Bedienungsanleitung

Leica

Leica M Bedienungsanleitung

Leica

Leica DM4000B Bedienungsanleitung

Leica

Leica DMI6000 B Bedienungsanleitung

Leica

Leica S Series Bedienungsanleitung

Beliebte Mikroskop Handbücher anderer Marken

Thermo Scientific

Thermo Scientific Nicolet iN10 Leitfaden

National

National DC3-163 Bedienungsanleitung

KERN Optics

KERN Optics OPE-1 Bedienungsanleitung

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Bedienungsanleitung

Prior

Prior Lux POL Bedienungsanleitung

Opitec

Opitec Smartscoop 115615 Bedienungsanleitung

KERN

KERN OPO-1 Bedienungsanleitung

Topcon

Topcon SP-1P Bedienungsanleitung

Motic

Motic PA43 Bedienungsanleitung

MshOt

MshOt MZ62 Bedienungsanleitung

KERN Optics

KERN Optics OZR-5 Bedienungsanleitung

VWR

VWR VisiScope 384 Series Bedienungsanleitung

Nikon

Nikon ECLIPSE E200 POL Bedienungsanleitung

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

Olympus

Olympus SZ61 Bedienungsanleitung

AO Cycloptic Bedienungsanleitung

Celestron

Celestron 44345 Bedienungsanleitung