Lippert Curt 18110 Bedienungsanleitung

CURTMFG.COM •PRODUCT SUPPORT: 877.287.8634 •18110-INS-RB •04/21/2021 •ECN8300 •PAGE 1

Product Registration and Warranty

CURT stands behind our products with industry-leading warranties. To get copies of the product

warranties, register your purchase or provide feedback, visit: warranty.curtgroup.com/surveys

WARNING

Never exceed the vehicle manufacturer's recommended towing capacity.

Do not exceed the capacity of your lowest rated towing component.

Do not exceed maximum weight capacity of 300 lbs. when using 2" receiver tube.

Distribute the weight evenly on platform when hauling a load.

Do not carry loads taller, wider or deeper than the cargo carrier. Do not carry flammable items

on carrier or allow exhaust fumes to blow directly on your cargo. This is a fire hazard.

Always use caution when in reverse (R) to help avoid personal injury.

Loads must be evenly distributed.

Never use as a step or platform - injury may result.

Do not use to carry flammable items or allow exhaust

fumes to blow directly on items in the carrier – fire hazard.

Do not use to transport people.

Do not block brake lights or turn signals.

Weight Carrying Capacity

Weight capacity 300 lbs.

INSTALLATION MANUAL 18110

Tools Required

Wrench set Adjustable wrench

Level of Difficulty

Easy

Installation difficulty levels are based on time

and effort involved and may vary depending on

the installer level of expertise, condition of the

vehicle and proper tools and equipment.

NOTICE

Visit www.curtmfg.com for a full-color copy of this

instruction manual, as well as helpful videos, guides and much more!

Before you begin installation, read all instructions thoroughly.

Proper tools will improve the quality of installation and reduce the time required.

Periodic inspection of your product should be performed

to ensure all hardware and / or components remain secure.

Product Photo

Torque Speciﬁcations

M10 bolt 16 ft-lbs.

Use above torque setting unless otherwise noted

Parts List

Item Qty Description

1 2 Platform frame, half

2 1 Shank, 1-1/4"

3 2 Connecting plate

4 1 Shank adapter, 2"

5 1 Clip

6 1 Hex bolt, 1/2"

7 1 Spring washer, 1/2"

8 1 Flat washer, 1/2"

914 Lock nut, M10

10 12 Carriage bolt, M10 x 20mm

11 2Carriage bolt, M10 x 75mm

12 1Flat brace

13 2Support bridge

14 2Round tube pad

CURTMFG.COM •PRODUCT SUPPORT: 877.287.8634 •18110-INS-RB •04/21/2021 •ECN8300 •PAGE 2

ASSEMBLY

Parts List

Item Qty Description

1 2 Platform frame, half

2 1 Shank, 1-1/4"

3 2 Connecting plate

4 1 Shank adapter, 2"

5 1 Clip

6 1 Hex bolt, 1/2"

Parts List

Item Qty Description

7 1 Spring washer, 1/2"

8 1 Flat washer, 1/2"

914 Lock nut, M10

10 12 Carriage bolt, M10 x 20mm

Parts List

Item Qty Description

11 2Carriage bolt, M10 x 75mm

12 1Flat brace

13 2Support bridge

14 2Round tube pad

CURTMFG.COM •PRODUCT SUPPORT: 877.287.8634 •18110-INS-RB •04/21/2021 •ECN8300 •PAGE 3

TOWING BASICS & SAFETY INFORMATION

For information on safely towing your trailer, visit curtmfg.com/understanding-towing.

Step 1

Align the two platform halves (#1), as shown. Using the top two holes

only, connect the platform halves (#1) and connecting plates (#3) with

M10 x 20mm carriage bolts (#10) and M10 lock nuts (#9).

Hand tighten.

Step 3

Using the bottom two holes, finish connecting the platform halves (#1)

and connecting plates (#3) with M10 x 20mm carriage bolts (#10) and

M10 lock nuts (#9). Hand tighten.

Fully tighten all of the bolts and

lock nuts to the specified torque specs.

Step 4

Insert the cargo carrier shank into the vehicle's receiver tube.

Secure with 1/2" hex bolt (#6), spring washer (#7),

flat washer (#8) and clip (#5).

To adapt the 1-1/4" shank to a 2" shank, place the adapter (#4) onto

the 1-1/4" shank. Align the holes and secure with 1/2" hex bolt (#6),

spring washer (#7), flat washer (#8) and clip (#5).

310

Step 2

Put the 1-1/4" shank (#2) under the middle of platform (#1). Place the

round tube pads (#14) and support bridges (#13) under the shank.

Place the flat brace (#12) in the top middle of the platform. Connect

by hand-tightening the M10 x 75mm carriage bolt (#11) and M10 lock

nut (#9). Secure the support bridges using four M10 x 20mm carriage

bolts (#10) and M10 lock nuts (#9).

13 9

Andere Lippert Autozubehör Handbücher

Lippert

Lippert SolidStep 4.0 Bedienungsanleitung

Lippert

Lippert Vela Pop Up Gebrauchs- und Pflegehandbuch

Lippert

Lippert Kwikee Step Well Cover Bedienungsanleitung

Lippert

Lippert FLYSCREEN N Series Bedienungsanleitung

Lippert

Lippert Power Steps 2.0 Bedienungsanleitung

Lippert

Lippert Sway Command 1.5 Bedienungsanleitung

Lippert

Lippert LatchXtend RV Door Handle Bedienungsanleitung

Lippert

Lippert 2021000090 Montageanleitung

Lippert

Lippert THEATER SEATING Gebrauchs- und Pflegehandbuch

Lippert

Lippert Thule 5200 Gebrauchs- und Pflegehandbuch

Lippert

Lippert TI-276 Bedienungsanleitung

Lippert

Lippert Curt 16613 Bedienungsanleitung

Lippert

Lippert Stargazer Nano Long Skylight Bedienungsanleitung

Lippert

Lippert Curt 13496 Bedienungsanleitung

Lippert

Lippert ARIES 2500207 Bedienungsanleitung

Lippert

Lippert Tire Linc 2020106863 Montageanleitung

Lippert

Lippert 10570 Gebrauchsanweisung

Lippert

Lippert JT's Strong Arm Montageanleitung

Lippert

Lippert RV Bedienungsanleitung

Lippert

Lippert SMART BED UNIVERSAL KIT Bedienungsanleitung

Lippert

Lippert Stargazer Spirit XTR Skylight Bedienungsanleitung

Lippert

Lippert Curt 18150 Bedienungsanleitung

Lippert

Lippert VELA POP-UP ROOF Bedienungsanleitung

Lippert

Lippert Project 2000 Sliding Step Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung

Prorack

Prorack K1163 Bedienungsanleitung