Mercia Garden Products 01PTGRA0301-V3 Gebrauchsanweisung

P 1

01PTGRA0301-V3

PRESSURE TREATED GRAND STORAGE

2mm Drill bit

x2 Winter = High Moisture = Expansion

Summer = Low Moisture = Contraction

All building’s should be

erected by two adults

For ease of assembly, you

MUSTpilot drill all screw

holes and ensure all screw

heads are countersunk.

For assistance please contact customer care on: 01636 880514

Mercia Garden Products Limited,

Sutton On Trent,

Newark,

Nottinghamshire,

NG23 6QN

www.merciagardenproducts.co.uk

CAUTION

Every eort has been made during the

manufacturing process to eliminate the

prospect of splinters on rough surfaces of the

timber. You are strongly advised to wear gloves

when working with or handling rough sawn

timber.

Please retain product label and instructions for future reference

General Instructions

BEFORE YOU START PLEASE READ INSTRUCTIONS CAREFULLY

- Check the pack and make sure you have all the parts listed.

- When you are ready to start, make sure you have the right tools at hand (not supplied) including a Phillips

screwdriver, Stanley knife, wood saw, step ladder and drill with 2mm bit.

- Ensure there is plenty of space and a clean dry area for assembly.

TIMBER

As with all natural materials, timber can be aected during various weather conditions. For the duration of

heavy or extended periods of rain, swelling of the wood panels may occur. Warping of the wood may also occur

during excessive dry spells due to an interior moisture loss. Unfortunately, these processes cannot be avoided

but can be helped. It is suggested that the outdoor building is sprayed with water during extended periods of

warm sunshine and sheltered as much as possible during rain or snow.

Once your garden building has been installed it will need to be treated as soon as possible and annually to

prevent the timber from deteriorating and to waterproof it. This is required to maintain the anti-rot guarantee.

Dip Treated buildings - Require a preservative treatment to protect against rot and decay and a waterproof

treatment to prevent water ingress

Pressure Treated buildings - Require a waterproof treatment to prevent water ingress

Log Cabins - Are supplied untreated and require a preservative and waterproong treatment.

BUILDING A BASE

When thinking about where the building and base is going to be constructed:

Ensure that there will be access to all sides for maintenance work and annual

treatment.

Ensure the base is level and is built on rm ground, to prevent distortion. Refer to diagrams for the base

dimensions, The base should be slightly smaller than the external measurement of the building, i.e. The

cladding should overlap the base, creating a run o for water. It is also recommended that the oor be at least

25mm above the surrounding ground level to avoid ooding.

TYPES OF BASE

- Concrete 75mm laid on top of 75mm hard-core.

- Slabs laid on 50mm of sharp sand.

Whilst all products manufactured are made to the highest standards of Safety and in the case of childrens

products independently tested to EN71 level, we cannot accept responsibility for your safety whilst erecting

or using this product.

Refer to the instructions pages for you specic product code

Pressure Treated Timber

Pressure treating is a chemical process which helps to protect wood against adverse weather which could

lead to rot or insect damage.

The most common chemicals used to pressure treat wood are Alkaline Copper Quaternary(ACQ),

Copper Azole (CA), and Micronized Copper Quaternary(MCQ).

Safety:Always wear gloves, eye protection and a dust mask when handling wood. Due to chemicals in

pressure treated wood, never burn its sawdust or scraps; instead dispose in a landll.

P 2

01PTGRA0301-V3

Overall Dimensions:

Length = 581mm

Width = 999mm

Height = 2009mm

Base Dimensions:

Length = 970mm

Width = 560mm

Please retain product label and instructions for future reference

Before assembly

please make sure you have a

suitable base ready to erect your

building

MADE IN GREAT BRITAIN

1 2 3

Door Gable QTY 1

AI-01GRADG975X1986-V3

Remove transportation

blocks from the bottom of

each panel before

beginning assembly. Each

Panel should have two

blocks.

Place the oor on a rm and

level base, ensure that the

base has suitable drainage,

free from areas where

standing water can collect.

(see front page on base

requirements).

Pre Assembly

Plain Side QTY 2

AI-03GRAPS500X1745-V3

Plain Gable QTY 1

AI-01GRAPG975X1986-V3

Roof Sheet

QTY 2

PI-03-0060

Floor QTY 1

AI-01GRAF560X970-V3

Door QTY 1

AI-01GRAD744X1683-V3

Eaves - 28 x 28 x 580mm QTY 2 FS2828-580MM

Fascias - 12 x 60 x 610mm QTY 4 S1260-610MM

Cover Trims - 12 x 40 x 1727mm QTY 4

S1240-1727MM

Bolt Block - 28 x 28 x 160mm QTY 1 FS2828-160MM

11 Finial

QTY 2

SHED DIAMOND FINIAL

Pad Bolt QTY 1

PI-07-0035

T-Hinges QTY 3

PI-02-1042

Nail Bag Felt Tacks x33

30mm Black Screw x11

30mm Screw x55

40mm Screw x10

50mm Screw x23

Step 1

Step 2 Step 3

Step 4

30mm

screw

Place the plain gable and one

plain side onto the oor and

secure together using

3x50mm screws.

3x50mm Screws

P 3

Please retain product label and instructions for future reference

Fix the T-Hinges to the door

using 7x30mm screws per

hinge. Ensure to line the

screws with the framing.

21x30mm Screws

30mm

screw

Pre drill

hole

bAttach the bolt block

to the inside of the

door, line the block

with the end of the

centre framing and

secure using

2x30mm screws.

2x30mm Screws

30mm

screw

Pre drill

hole

cFix the pad bolt to the

door using 10x30mm

black screws.

Ensure to align the pad

bolt with the door’s

framing and the bolt

block.

10x30mm Black Screws

Pre drill

hole

50mm

screw

Pre drill

hole

bDo not secure the building

to the oor until the roof is

tted.

Fix the door gable and the

second plain side using the

method outlined above in step 3.

9x50mm Screws

50mm

screw

Pre drill

hole 1

Step 5

Step 6

HANDLE

WITH CARE

Felt tacks

Step 7

Step 8

P 4

Please retain product label and instructions for future reference

Fix the roof eaves to the roof sheets

using 3x30mm screws per eave.

Make sure the edge of the roof and

the eave are ush.

Attach each roof to the building using

6x30mm screws.

18x30mm Screws

30mm

screw

Pre drill

hole

Lay the felt sheet over the

roof in one strip, making sure

to leave an equal overhang

on all sides (approx 50mm

each side).

Fix using 30x felt tacks at

100mm intervals.

30x Felt Tacks

Secure the building to the oor using

10x50mm screws.

Ensure the screws line up with the

oor bearers

10x50mm Screws

50mm

screw

Pre drill

hole

Attach the cover trims at each corner

using 3x30mm screws per trim.

12x30mm Screws

30mm

screw

Pre drill

hole

For assistance please contact customer care on: 01636 880514

Mercia Garden Products Limited,

Sutton On Trent,

Newark,

Nottinghamshire,

NG23 6QN

www.merciagardenproducts.co.uk

Step 8

P 5

Please retain product label and instructions for future reference

Pre drill

hole

40mm

screw

Fix the fasicas and nials

in place using 40mm

screws. Make sure to

trap the felt between

the fasicas and building.

8x40mm Screws

It is ESSENTIAL that you apply wood treat-

ment immediately after the building has

been assembled.

Andere Mercia Garden Products Gartenhaus Handbücher

Mercia Garden Products

Mercia Garden Products 01DTSHOSBRAX0604SDFW-V1 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 01SHPWOR1010DDOW-V1 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 01DDPENT1408-V3 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products CARLTON ARBOUR ESDXL21PT050 Bedienungsanleitung

Mercia Garden Products

Mercia Garden Products OSB APEX Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 06LOG016-V1 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 01OVLPA1208DDFW-V1 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 03TGCORSE0408-V1 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 01GRO0705-V2 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 03DTSHCV1208HGD4MW-V1 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 03DTSHAX0705HGD2MW-V1 Bedienungsanleitung

Mercia Garden Products

Mercia Garden Products 01DTOVRA0806SDFW-V1 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 01GRO1008DD-V1 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 02RSE0505-V1 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 03TGCOR0707-V5 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products SI-002-001-0022 Bedienungsanleitung

Mercia Garden Products

Mercia Garden Products 01PTOSBA1008DDFW-V2 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 01OVLPA0510PB-V1 Bedienungsanleitung

Mercia Garden Products

Mercia Garden Products 0634RARE0302ND1SW-V1 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 01DTSHRAX0604SDNW-V1 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 0628WKNE0304LBDD2SW-V1 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 03DTSHHP0806HGD4MW-V1 Bedienungsanleitung

Mercia Garden Products

Mercia Garden Products 02DTSHOPN0305-V1-PEFC Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 0619RANE0325FGSD3TW-V1 Gebrauchsanweisung

Beliebte Gartenhaus Handbücher anderer Marken

Lemeks

Lemeks Palmako PA120-5930-6 Installationshandbuch

Rion

Rion Hobby Gardener Bedienungsanleitung

Gartenhaus-King

Gartenhaus-King Valery Bedienungsanleitung

Select

Select ISAAC E9682 Bedienungsanleitung

Palmako

Palmako Saale Bedienungsanleitung

Lemeks

Lemeks Palmako Kira EL16-3623 Installationshandbuch

Palmako

Palmako Roger FR44-5953-2 Bedienungsanleitung

Pergola kits USA

Pergola kits USA PREMIUM VINYL PAVILION Bedienungsanleitung

G21

G21 Boston 882 Bedienungsanleitung

Lemeks

Lemeks Palmako Grace PM56-4529 Installationshandbuch

Shire

Shire Salcey Bedienungsanleitung

Rutland County

Rutland County Burley 6ft Bedienungsanleitung

Palmako

Palmako Roger 27,7 Bedienungsanleitung

Lemeks

Lemeks Palmako PA120-5930-9 Installationshandbuch

Lemeks

Lemeks Palmako PM70-6436 Installationshandbuch

Lemeks

Lemeks Palmako PM56-4435 Installationshandbuch

Lemeks

Lemeks 106214 Installationshandbuch

POD

POD Camping 480 Bedienungsanleitung