Metra Electronics 107-KI2HG Bedienungsanleitung

INSTALLATION INSTRUCTIONS

107-KI2HG

Patent Pending

Attention! With the key out of the ignition,

disconnect the negative battery terminal

before installing this product. Ensure that all

installation connections are secure before

cycling the ignition to test this product.

KIT FEATURES

• Designed speciﬁcally for Pioneer modular 6.8” radios like the

DMH-C2550NEX and DMH-C2500NEX. †

† Refer to the radio manufacturer for current models

• Both textured and painted gloss black to match the factory ﬁnish.

KIT COMPONENTS

• A) Front panel • B) Back panel • C) Radio chassis brackets • D) Radio display brackets • E) Display trim panel • F) #8 x 3/8” Phillips screws (4)

• G) #4 x 3/8” Phillips screws (10) • H) Panel clips (4)

TOOLS REQUIRED

• Panel removal tool • Phillips screwdriver

TABLE OF CONTENTS

Dash Disassembly ..............................................2-4

Kit Preparation .......................................................5

Kit Assembly ...................................................... 6-7

A CB D E

Kia K5 2021-Up

Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle

speciﬁc applications

WIRING & ANTENNA CONNECTIONS

(sold separately)

Wiring Harness:

Visit metraonline.com for audio/

video and steering wheel control interface options.

Antenna Adapter: Not required

F G

386.257.1187

MetraOnline.com

1. Unclip and remove the trim panel from

the passenger side of the dash.

(Figure A)

2. Remove (2) Phillips screws exposed

after removing side panel in step 1.

(Figure B)

DASH DISASSEMBLY

3. Unclip the trim panel above the glove

box and let hang. Note: You do not need

to remove the entire panel.

(Figure C)

4. Remove (3) Phillips screws exposed

after unclipping panel above glove box

in step 3. (Figure C)

5. For models equipped with key cylinder

start on steering column:

Unclip the right side of the trim panel to

the right of the steering column below

the instrument cluster. Note: You do not

need to remove the entire trim panel.

(Figure D)

Continued on the next page

(Figure A) (Figure C)

(Figure B) (Figure D)

REV. 2/15/2022 INST107-KI2HG 3

DASH DISASSEMBLY (CONT.)

(Figure E) (Figure F)

6. Unclip and remove the trim panel below

the radio. (Figure E)

7. Unclip and remove the small trim panel

behind the radio screen then remove the

(2) Phillips screws exposed. (Figure F, G)

Continued on the next page

(Figure G)

386.257.1187

MetraOnline.com

(Figure H) (Figure I)

DASH DISASSEMBLY (CONT.)

8. Remove (2) Phillips screws below the

radio screen. (Figure H)

9. Unclip and remove the radio screen and

chassis. (Figure I)

Continue to Kit Preparation

REV. 2/15/2022 INST107-KI2HG 5

1. Secure the (4) included panel clips to the

back panel. (Figure A)

Continue to Kit Assembly

KIT PREPARATION

(Figure A)

386.257.1187

MetraOnline.com

KIT ASSEMBLY

(Figure A) (Figure D)

(Figure B) (Figure E)

(Figure C)

Pioneer Modular DDIN radio provision

Note: Reference the installation manual

provided with the radio for which hardware

to use. The display screen and radio chassis

use two different types of screws.

1. Secure the radio chassis brackets to the

back panel using (4) #8 x 3/8” screws

supplied. (Figure A)

2. Secure the radio chassis to the radio

chassis brackets using screws supplied

with the radio. Route the display

cable to the inside of the panel to be

connected next. (Figure B)

3. Remove the alignment tabs on the

radio display brackets marked 8. Secure

the radio display to the radio display

brackets using (6) screws supplied with

the radio. Note: The proper mounting

holes to use are indicated in ﬁgure D.

(Figure C, D, E)

Continued on the next page

Remove shaded tabs

Use shaded holes to mount 7” display

REV. 2/15/2022 INST107-KI2HG 7

4. Connect the cable to the radio display,

place the display trim panel over the

display, and secure to the back panel

with (4) #4 x 3/8” screws provided.

(Figure G)

5. Secure the front panel to the radio/

back panel assembly using (6) #4 x 3/8”

screws provided. (Figure H)

6. Locate the factory wiring harness and

antenna connector in the dash and

complete all necessary connections to

the radio. Metra recommends using

the proper mating adapter from Metra

and/or Axxess. Test the radio for proper

operation.

7. Clip the radio assembly into to the dash,

then secure using the factory screws.

8. Reassemble the dash in reverse

order of disassembly to complete the

installation.

KIT ASSEMBLY (CONT.)

(Figure H)(Figure G)

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills by

enrolling in the most recognized and respected

mobile electronics school in our industry.

Log onto www.installerinstitute.com or call

800-354-6782 for more information and take steps

toward a better tomorrow.

Metra recommends MECP

certiﬁed technicians

INSTALLATION INSTRUCTIONS

107-KI2HG

Having difﬁculties? We’re here to help.

Contact our Tech Support line at:

386-257-1187

Or via email at:

techsupport@metra-autosound.com

Tech Support Hours (Eastern Standard Time)

Monday - Friday: 9:00 AM - 7:00 PM

Saturday: 10:00 AM - 7:00 PM

Sunday: 10:00 AM - 4:00 PM

Andere Metra Electronics Autozubehör Handbücher

Metra Electronics

Metra Electronics 95-1003 Bedienungsanleitung

Metra Electronics

Metra Electronics 95-9403B Bedienungsanleitung

Metra Electronics

Metra Electronics 95-9012 Bedienungsanleitung

Metra Electronics

Metra Electronics 99-7804B Bedienungsanleitung

Metra Electronics

Metra Electronics 109-TO7 Bedienungsanleitung

Metra Electronics

Metra Electronics LEXUS 99-8156 Bedienungsanleitung

Metra Electronics

Metra Electronics 95-9313B Bedienungsanleitung

Metra Electronics

Metra Electronics 99-7877S Bedienungsanleitung

Metra Electronics

Metra Electronics 99-7308 Bedienungsanleitung

Metra Electronics

Metra Electronics 95-8904B Bedienungsanleitung

Metra Electronics

Metra Electronics 99-7334 Bedienungsanleitung

Metra Electronics

Metra Electronics 99-4000 Bedienungsanleitung

Metra Electronics

Metra Electronics 99-6536 Bedienungsanleitung

Metra Electronics

Metra Electronics 108-TO7HG Bedienungsanleitung

Metra Electronics

Metra Electronics 95-8903B Bedienungsanleitung

Metra Electronics

Metra Electronics 99-9109B Bedienungsanleitung

Metra Electronics

Metra Electronics 88-00-2020 Bedienungsanleitung

Metra Electronics

Metra Electronics 99-5850B Bedienungsanleitung

Metra Electronics

Metra Electronics 99-7343 Bedienungsanleitung

Metra Electronics

Metra Electronics 99-7335S Bedienungsanleitung

Metra Electronics

Metra Electronics CHTO-013 Bedienungsanleitung

Metra Electronics

Metra Electronics 98-7499 Bedienungsanleitung

Metra Electronics

Metra Electronics 71-1729 Gebrauchsanweisung

Metra Electronics

Metra Electronics 99-8100 Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Renault

Renault 77 11 423 180 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung