Moxa Technologies TCF-142-M-SC-RM Bedienungsanleitung

P/N: 1802001420642

*1802001420642*

TCF-142-RM Series

Quick Installation Guide

Version 6.0, February 2020

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe:

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India:

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045



- 2 -

Overview

Introduction

The TCF-142-RM series fiber converters are slide-in modules that can

be installed in the NRack System’s rackmount chassis, such as the TRC-

190 series. The slide-in module is equipped with a multiple interface

circuit that can handle RS-232 or RS-422/485 serial interfaces, and

multi-mode or single-mode fiber. The TCF-142-RM series slide-in

modules are used to extend serial transmission distance up to 5 km

(TCF-142-M-XX-RM, with multi-mode fiber) or up to 40 km (TCF-142-S-

XX-RM, with single-mode fiber).

Why Convert Serial to Fiber?

Fiber communication not only extends the communication distance, but

also provides many advantageous features. IMMUNITY FROM

ELECTRICAL INTERFERENCE: Fiber is not affected by electromagnetic

interference or radio frequency interference. It provides a clean

communication path and is immune to cross-talk. INSULATION: Optical

fiber is an insulator; the glass fiber eliminates the need for using

electric currents as the communication medium. SECURITY: Fiber

cannot be tapped by conventional electric means and is very difficult to

tap into optically. Furthermore, radio and satellite communication

signals can be captured easily for decoding. RELIABILITY &

MAINTENANCE: Fiber is immune to adverse temperature and moisture

conditions, does not corrode or lose its signal, and is not affected by

short circuits, power surges, or static electricity.

No Configuration Required for Baudrate Settings

The TCF-142-RM slide-in modules work under any baudrate from 50

bps to 921.6 Kbps. The TCF-142-RM slide-in modules simply convert

the signal back and forth between serial (RS-232, RS-422, or RS-485)

and fiber, and since the TCF-142-RM slide-in modules do not need to

interpret the signal, it does not need to know the baudrate of the

transmitting device. For this reason, the TCF-142-RM slide-in modules

do not have any DIP switches or jumpers for setting the baudrate.

Ring Mode

To allow one half-duplex serial device to communicate with multiple

half-duplex devices connected to a fiber ring, you should configure the

TCF-142-RM slide-in modules for “ring mode” by setting DIP switch

“SW3” to the “On” position. The Tx port of a particular TCF-142-RM

slide-in modules unit connects to the neighboring converter’s Rx port to

form the ring. Note that when one node transmits a signal, the signal

travels around the ring until it returns to the transmitting unit, which

then blocks the signal. Users should ensure that the total fiber ring

length is less than 100 km when using either single-mode models or

multi-mode models.

- 3 -

Installation

The media converter slide-in module can be hot-swapped, which means

the chassis doesn’t have to power off or be removed during installation.

Align the slide-in module with the chassis installation slot so that the

panel fastener screw is at the top of the module. Carefully slide the

slide-in module into the slot while aligning the module’s circuit board

with the installation guide. Ensure the slide-in module is firmly seated

inside the chassis. Push in and rotate the attached panel fastener screw

clockwise to secure the module to the chassis.

Features

•“Ring” or “Point to Point” transmission

•Extend RS-232/422/485 transmission distance:

up to 40 km with single-mode—TCF-142-S-XX-RM slide-in

modules series

up to 5 km with multi-mode—TCF-142-M-XX-RM slide-in

modules series

•Slide-in modules of NRack system

•Decrease signal interference

•Protect against electrical degradation and chemical corrosion

•Support baudrate up to 921.6 Kbps

Package Checklist

Before installing the TCF-142-RM slide-in module, verify that the

package contains the following items:

•TCF-142-RM slide-in module Fiber Converter

•Quick Installation Guide

•Warranty Card

NOTE: Please notify your sales representative if any of the above items

are missing or damaged.

- 4 -

Mounting Dimensions (Unit: mm)

TCF-142-SC

TCF-142-ST

- 5 -

ATTENTION

Electrostatic

Discharge Warning!

To protect the product from damage due to electrostatic

discharge, we recommend wearing a grounding device when

handling your TCF-142-RM-slide-in modules module series.

Pin Assignment and Connector

9-pin D-sub Female

RS-232

RS-422/485-4w

RS-485-2w

–

RxD-(A)

Data-(A)

TxD

RxD+(B)

Data+(B)

RxD

TxD+(B)

–

TxD-(A)

–

GND

–

Fiber Cable

SC-Port Pinouts

SC-Port to SC-Port Cable Wiring

ST-Port Pinouts

ST-Port to ST-Port Cable Wiring

ATTENTION

This is

a Class 1 Laser/LED product. Do not stare into the Laser

Beam.

- 6 -

Switch Settings

There are three sets of DIP switches on the board. One set for fiber and

another for the connector. Following are the settings for the three

connector DIP switches.

Pin1 Pull High

Pin 2 Pull Low

Pin 3 Terminator

150 kilo-

ohms

OFF

1 kilo-ohm

OFF

120 ohms

(enable)

120 ohms

(disable)

- - OFF

ATTENTION

For Fiber Ring Users:

Before you plug the slide

in module into the chassis, make sure

the DIP switch settings are correct before inserting the slide

-in

module into the chassis and connecting the serial and fiber

cables. If the Rx LEDs of the conv

erter glow continuously,

remove the fiber cable and reconnect.

NOTE

“Ring Mode” can only be used for half-duplex applications.

The settings for the RS-485 DIP switches are:

Pin1

Pin 2

Pin 3

RS-232

RS-422

OFF

RS-485 (4W)

OFF

RS-485 (2W)

OFF

- 7 -

Pin1

Pin 2

Pin 3

Ring

Point to Point

OFF

The S3 DIP Switch is located inside the TCF-142-RM. When the TCF-

142-RM is in RS-485 mode, use this DIP switch to configure RS-485

data direction control, data format, and baudrate. When the TCF-142-

RM is in RS-232/422 mode, the S3 DIP switch cannot affect RS-

232/422 communication.

RS-485 Data Direction Control Settings

RS-485 Data Direction Control

S3 Pin 1

Auto Baudrate

OFF

Fixed Baudrate

Data Format Settings

Data Format

S3 Pin 2

S3 Pin 3

S3 Pin 4

7 Bits

OFF

8 Bits

OFF

9 Bits

OFF

10 Bits

OFF

11 Bits

OFF

12 Bits

OFF

The serial data format includes one start bit, between five and eight

data bits, and one stop bit. A parity bit and an additional stop bit might

be included in the format as well.

For example, 8-N-1 is interpreted as eight data bits, no parity bit, and

one stop bit. Users need to adjust the DIP switch to set the data format

to 10 bits.

Baudrate

S3 Pin 5

S3 Pin 6

S3 Pin 7

S3 Pin 8

S3 Pin 9

OFF

110

OFF

134.5

OFF

150

OFF

300

OFF

600

OFF

1200

OFF

1800

OFF

2400

OFF

4800

OFF

7200

OFF

9600

OFF

19200

OFF

38400

OFF

57600

OFF

115200

OFF

230400

OFF

460800

OFF

921600

OFF

- 8 -

LED Indicators

There are three LEDs on the front bracket of the TCF-142-RM slide-in

modules.

LED

Color

Function

PWR

Green

Steady ON: Power is ON

Fiber Tx

Green

When sending serial data from the fiber port

Fiber Rx

Yellow

When receiving data from the fiber port

Specifications

Serial Communication

Signals for RS-232

TxD, RxD, SGND

Signals for RS-422

TxD+, TxD-, RxD+, RxD-, SGND

Signals for 4-wire RS-485

TxD+, TxD-, RxD+, RxD-, SGND

Signals for 2-wire RS-485

Data+, Data-, SGND

Baudrate

50 bps to 921.6 Kbps

ESD protection

15 KV ESD

Fiber Communication

Connector type

ST or SC

Distance

Single mode fiber for 40 km

Multi-mode fiber for 5 km

Support Cable

Single mode:

Multimode:

8.3/125, 8.7/125, 9/125 or 10/125 μm

50/125, 62.5/125, or 100/140 μm

Wavelength

Single mode: 1310 nm

Multimode: 850 nm

TX Output

Single mode: > -5 dBm

Multimode: > -5 dBm

RX Sensitivity

Single mode:

-25 dBm

Multimode: -20 dBm

Point-to-Point Transmission

Half or Full duplex

Multi-drop Transmission

Half duplex, fiber ring

Environmental

Operating Temperature

0 to 60°C (32 to 142°F), 5 to 95 % RH

Storage Temperature

-20 to 75°C (-4 to 185°F), 5 to 95 % RH

Power

Input Power Voltage

12 VDC

Power Consumption

150 mA @ 12V

Mechanical

Dimensions (W × D × H)

86.8 × 136.46 × 21 mm

Material

SPCC

Gross Weight

80 g

Regulatory Approvals

Class A

FCC

Part 15 sub part B Class A

EMS

EN 61000-4-2 (ESD): Contact: 4 kV;

Air: 8 kV

EN 61000

-4-3 (RS): 80 MHz to 1 GHz:

3 V/m

EN 61000

-4-4 (EFT): Power: 1 kV;

EN 61000

-4-5 (Surge): Power: 2 kV (AC

Power); Power: 1 kV (DC Power).

EN 61000-4-6 (CS): 150 kHz to 80 MHz:

- 9 -

3 V/m

EN 61000

-4-8 (PFMF)

EN 61000-4-11 (DIPS)

Free fall

IEC 60068-2-32

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Moxa Technologies Medienkonverter Handbücher

Moxa Technologies

Moxa Technologies IMC-21GA Handbuch

Moxa Technologies

Moxa Technologies VPort 461A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 25 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ICF-1170I-M-ST Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 251 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ICF-1150 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 464 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies TCC-100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies Transio A52 Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 364A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies UPort 1250I Bedienungsanleitung

Moxa Technologies

Moxa Technologies IMC-101 Series Handbuch

Moxa Technologies

Moxa Technologies IMC-21A IMC-21A Bedienungsanleitung

Moxa Technologies

Moxa Technologies UPORT 1110 Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 451 Bedienungsanleitung

Moxa Technologies

Moxa Technologies UPORT 1400 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies IMC-P101 Series Handbuch

Moxa Technologies

Moxa Technologies UPort 1400-G2 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies UPORT 1200 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies UPort 2000 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ICF-1280I Series Handbuch

Moxa Technologies

Moxa Technologies IMC-21A series Handbuch

Moxa Technologies

Moxa Technologies N Port Express Installations- und Benutzerhandbuch

Moxa Technologies

Moxa Technologies VPort 351 Series Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung