Moxa Technologies UPORT 1200 series Bedienungsanleitung

P/N: 180201400001A

*180201400001A*

UPort 1200/1400/1600 Series

Quick Installation Guide

USB-to-Serial Converter

Version 9.2, May 2021

Technical Support Contact Information

www.moxa.com/support

- 2 -

Overview

Moxa’s USB-to-serial product provides a wide range of easy-to-use

solutions for adding Windows COM ports and Linux tty ports through a

PC’s USB port .

The UPort 1200/1400/1600 series are the following models:

•UPort 1250: 2-po rt RS -232/422/485 USB-to-serial converter

•UPort 1250I: 2-po rt RS -232/422/485 USB-to-serial converter w/

isolation protection

•UPort 1410: 4-po rt RS -232 USB-to-serial converter

•UPort 1450: 4-po rt RS -232/422/485 USB-to-serial converter

•UPort 1450I: 4-port RS -232/422/485 USB-to-serial converter w/

isolation protection

•UPort 1610-8: 8-port RS-232 USB-to-serial converter

•UPort 1650-8: 8-port RS-232/422/485 USB-to-serial converter

•UPort 1610-16: 16-port RS-232 USB-to-serial converter

•UPort 1650-16: 16-port RS-232/422/485 USB-to-serial converter

Before connecting UPort USB-to-serial converters to your computer’s

USB port, we recommend installing the UPort driver first. To do this,

follow the installation procedure described in the “Installing the UPort

1200/1400/1600 Driver” section below. The installation procedure was

done on a PC running a Windows plat form. UPort converters can be

connected to any upstream type A USB port that is on the PC host or on

an upstream hub. UPort converters are hot pluggable, and therefore

there is no need to power down your computer prior to installation.

After installing the driver, connect the UPort to an upstream host or

hub. The Found New Hardware wizard will locate the appropriate

drivers automatically. Once the drivers are found, various windows will

pop up as the UPort’s serial port is being installed. When the Found

New Hardware Wizard finishes installing the UPort, use the operating

system’s Device Manager to check and/or modify the port settings.

The new COM port will be listed under Ports (COM & LPT).

Ordering Information

Package Checklist

Before installing the UPort, verify that the package contains the

following items:

•1 UPort 1200/1400/1600 USB-to-serial converter

•USB cable: CBL-USBA/B-100

•100 to 240 VAC power adapter (excluding T models, UPort

1250/1410)

•1 power cord suitable for your region (excluding T models, UPort

1250/1410)

•1 serial adapter: mini DB9F-to-TB (excluding UPort 1410/1610

series)

•WK-44-01: 19” rackmount L brackets (2 L-shaped plates with 8

screws; for UPort 1600-16 series)

•Quick installation guide (printed)

•Warranty card

NOTE

Notify your sales representative if any of the above items is

missing or damaged.

- 3 -

NOTE

The operating temperature of the power adapter in the box is

from 0 to 40°C. If

your application is not in this range, please

use a power adapter supplied by UL Listed External Power

Supply (

the power output meets SELV and LPS and is rated 12

to 48 VDC, the minimum current is 92.4 mA).

WARNING

1. This unit is not intended for consumer use. It will only be

shipped to manufacturers or factories.

2. The DC source should come from a class external adapter

or a 12 to 48 VDC safety extra-low voltage (SELV) limited

power source (LPS), using a transfer device.

3. This unit should be installed or set up by a qualified

service per son.

Refer to the table below to see whether external power is needed for

your UPort. If applicable, connect the UPort to an external power

source.

UPort

1250

UPort

1250I

UPort

1400

UPort

1600-8

UPort

1600-16

Bus Power



–



–

External

Power

(adapter)

– –

External

Power (cord)

– – – – 

Power Input Specifications

UPort 1250

5 VDC (bus power), 360 mA

UPort 1250I

12 to 48 VDC, 200 mA (max. in 12 VDC)

UPort 1410/1450

12 to 48 VDC (external) or 5 VDC (bus power), 260

mA (max. in 12 VDC)

UPort 1450I

12 to 48 VDC, 360 mA (max. in 12 VDC)

UPort 1600-8

12 to 48 VDC, 340 mA (max. in 12 VDC)

UPort 1600-16

100 to 240 VAC, 150 mA (max. in 100 VAC)

- 4 -

Installing the UPort 1200/1400/1600 Driver

1. Connect the UPort to the PC using the USB cable.

2. After turning your PC’s power on, Windows will automatically

detect the UPort.

3. Run the Setup program that you may find on Moxa’s support

website http://www.moxa.com/support/. Click Next to start

installing the driver.

4. Read and accept the agreement. Click Next to set the

indicated folder.

5. Set Start Menu Folder location

- 5 -

6. Click Install to proceed with the installation.

7. The installation will take a few minutes to complete.

8. After the driver has been installed successfully, you can click

Scan to review the installation results if the UPort is

connected to your computer.

- 6 -

9. Check Launch Windows Driver Manager after finish to

configure the UPort after quitting the driver installer.

Installing the macOS Driver

For macOS 10.12 and later, follow the steps below to install the driver

1. Enter recovery mode.

2. Disable System Integrity Protection (SIP) by typing 'csrutil disable' in

the terminal.

3. Return to normal mode.

4. Launch the UPort driver installer and finish the installation

procedure.

5. Enter recovery mode again.

6. Enable System Integrity Protection (SIP) by typing 'csrutil enable' in

the terminal.

7. Return to normal mode.

For detailed instructions, please refer to the UPort 1200/1400/1600

User’s Manual on the product webpage or the ‘readme.txt’ in the driver

installation package.

Installing the Linux Driver Linux Kernel

Execute the following commands from the Linux prompt:

# CD /moxa

# tar xvfz driv_linux_uport_[VERSION]_[BUILD].tgz

Find "Makefile" in /moxa/mxuport, then run

# make install

# modprobe mxuport

For further information, please refer to readme.txt that comes with the

driver.

Serial Port Pin Assignments

The serial ports on the UPort 1200/1400/1600 have DB9 male

connectors. Refer to the following table below fo r the RS-232 and RS-

422/485 pin assignments.

NOTE

For UPort with DB Male Serial Ports, you may refer to DB9 Male

Ports pin assignment section to loop back pin 2 and pin 3 for

the RS-232 interface to carry out a self-test on the device.

- 7 -

Male DB9

Pin RS-232

RS-422/

RS-485 4W

RS-485 2W

DCD

TxD-(A)

–

RxD

TxD+(B)

–

TxD

RxD+(B)

Data+(B)

DTR

RxD-(A)

Data-(A)

GND

DSR

–

RTS

–

CTS

–

Andere Handbücher für UPORT 1200 series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Moxa Technologies Medienkonverter Handbücher

Moxa Technologies

Moxa Technologies UPORT 1110 Bedienungsanleitung

Moxa Technologies

Moxa Technologies ICF-1150 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5100A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 461A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 2141 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NE-4100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies IMC-21 Bedienungsanleitung

Moxa Technologies

Moxa Technologies Transio A52 Bedienungsanleitung

Moxa Technologies

Moxa Technologies TCF-142 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 354 Bedienungsanleitung

Moxa Technologies

Moxa Technologies IMC-P101 Series Handbuch

Moxa Technologies

Moxa Technologies UPORT 1200 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies UPORT 1100 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 364A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies TCF-141-S Bedienungsanleitung

Moxa Technologies

Moxa Technologies IMC-21GA-T Handbuch

Moxa Technologies

Moxa Technologies ICF-1170I Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ICF-1180I Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5000 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies TCF-142-RM Series Handbuch

Moxa Technologies

Moxa Technologies UPort 1250I Bedienungsanleitung

Moxa Technologies

Moxa Technologies IMC-P101 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies UPort 2000 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 251 Series Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung