Moxa Technologies EDS-505A Series Bedienungsanleitung

P/N: 1802005000018

EDS-505A/508A

Hardware Installation Guide

Moxa EtherDevice™ Switch

Ninth Edition, April 2014

www.ipc2u.ru

www.moxa.pro

- 2 -

Package Checklist

The Moxa EDS-505A/508A is shipped with the following items. If any of

these items is missing or damaged, please contact your customer service

representative for assistance.

•1 Moxa EtherDevice Switch (EDS-505A or EDS-508A)

•Hardware Installation Guide

•CD-ROM with User’s Manual and Windows Utility

•Warranty Statement

•RJ45 to DB9 Console port cable

•Protective caps for unused ports

•Panel Mounting Kit (optional—must be ordered separately)

www.ipc2u.ru

www.moxa.pro

- 3 -

Panel Layout of EDS-505A/508A (Standard)

1. Grounding screw

2. Terminal block for power input

PWR1/PWR2 and relay output

3. Heat dissipation orifices

4. Console port

5. DIP switches

6. Power input PWR1 LED

7. Power input PWR2 LED

8. Fault LED

9. MSTR/HEAD: LED indicator

10.

CPLR/TA IL: LED indicator

11.

TP port’s 100 Mbps LED

12.

TP port’s 10 Mbps LED

13.

Model Name

14.

10/100BaseT(X) ports

15.

Screw hole for wall mounting kit

16.

DIN-Rail kit

www.ipc2u.ru

www.moxa.pro

- 4 -

Panel Layout of EDS-505A/508A (SC-type)

NOTE:

The appearance of

EDS

-505A-SS-SC is identical to that of

EDS

-505A-MM-SC.

The appearance of EDS

-508A-SS-

SC is

identical to that of EDS

-508A-MM-SC.

1. Grounding screw

2. Terminal block for power input

PWR1/PWR2 and relay output

3. Heat dissipation orifices

4. Console port

5. DIP switches

6. Power input PWR1 LED

7. Power input PWR2 LED

8. Fault LED

9. MSTR/HEAD: LED indicator

10.

CPLR/TAIL: LED indicator

11.

TP port’s 100 Mbps LED

12.

TP port’s 10 Mbps LED

13.

Model Name

14.

10/100BaseT(X) ports

15.

100BaseFX ports

16.

FX port’s 100 Mbps LEDs

17.

Screw hole for wall mounting kit

18.

DIN-Rail kit

www.ipc2u.ru

www.moxa.pro

- 5 -

Panel Layout of EDS-505A/508A (ST-type)

1. Grounding screw

2. Terminal block for power input

PWR1/PWR2 and relay output

3. Heat dissipation orifices

4. Console port

5. DIP switches

6. Power input PWR1 LED

7. Power input PWR2 LED

8. Fault LED

9. MSTR/HEAD: LED indicator

10.

CPLR/TAIL: LED indicator

11.

TP port’s 100 Mbps LED

12.

TP port’s 10 Mbps LED

13.

Model Name

14.

10/100BaseT(X) ports

15.

100BaseFX ports

16.

FX port’s 100 Mbps LEDs

17.

Screw hole for wall mounting kit

18.

DIN-Rail kit

www.ipc2u.ru

www.moxa.pro

- 6 -

Mounting Dimensions

Unit = mm (inch)

www.ipc2u.ru

www.moxa.pro

- 7 -

DIN-Rail Mounting

The aluminum DIN-Rail attachment plate should already be fixed to the

back panel of the EDS-505A/508A when you take it out of the box.

STEP 1:

Insert the top of the DIN

-Rail into

the slot just

below the stiff metal

spring.

STEP 2:

The DIN

-Rail attachment unit will

snap into place as shown.

To remove EDS-505A/508A from the DIN-Rail, simply reverse Steps 1

and 2.

Wall Mounting (optional)

For some applications, you will find it convenient to mount the

EDS-505A/508A on the wall, as shown in the following figures.

STEP 1:

Remove the aluminum DIN

Rail

attachment plate from

the

EDS

-505A/508A’s rear panel,

and then attach the wall mount

plates

with M3 screws

, as shown

the figures at the right.

STEP 2:

Mounting

the EDS-505A/508A on the wall requires 4

screws. Use the

EDS

, with wall mount plates attached,

as a guide to mark the correct locations of the 4

screws. The heads of the screws should be less than

6.0 mm in diameter, and the shafts should be less than

3.5 mm in diameter, as shown in the figure at the right.

NOTE

Before tightening the screws into the wall, make sure the screw

head and shank size are suitable by inserting the screw into one

of the keyhole-shaped apertures of the Wall Mounting Plates.

Do not screw the screws in completely—leave about 2 mm to allow room

for sliding the wall mount panel between the wall and the screws.

STEP 3:

Once the screws are fixed in the wall, insert the four screw heads through

the large parts of the keyhole-shaped apertures, and then slide the

EDS-505A/508A downwards, as indicated. Tighten the four screws for

added stability.

www.ipc2u.ru

www.moxa.pro

- 8 -

ATEX Information

1. Certificate number DEMKO 08 ATEX 0712961X

2. Ambient range (-40°C ≤Tamb ≤75°C)

3. Certification string (Ex nA nC IIC T4 Gc)

4. Standards covered ( EN60079-0:2012, EN60079-15:2010)

5. The conditions of safe usage:

•These products must be mounted in an IP54 enclosure.

•Install in an area of pollution degree 2 or less.

•Use a conductor wire of size 0.2 mm²or greater.

•PROVISIONS SHALL BE MADE, EITHER IN EXTERNAL TO THE

APPARATUS, TO PREVENT THE RATED VOLTAGE BEING

EXCEEDED BY THE TRANSIENTS DISTURBANCES OF MORE

THAN 40 %

Wiring Requirements

WARNING

The power for this product is intended to be supplied by a Listed

Power Unit, with output marked

LPS, and rated to deliver 12 to

VDC at a maximum of 600 mA.

WARNING

Safety First!

Be sure to disconnect the power cord before installing and/or

wiring your

Moxa EtherDevice Switch. Calculate the maximum

possible current in each power wire and common wire. Observe

all electrical codes dictating the maximum current allowable for

each wire size.

If the current goes above the maximum ratings,

the wiring could overheat, causing serious damage to your

equipment.

Please read and follow these important guidelines:

•Use separate paths to route wiring for power and devices. If power

wiring and device wiring paths must cross, make sure the wires are

perpendicular at the intersection point.

NOTE: Do not run signal or communications wiring, and power wiring

through the same wire conduit. To avoid interference, wires with

different signal characteristics should be routed separately.

•Use the type of signal transmitted through a wire to determine which

wires should be kept separate. The rule of thumb is that wiring that

shares similar electrical characteristics can be bundled together.

•Keep input wiring and output wiring separate.

•It is strongly advised that you label wiring to all devices in the system,

when necessary.

www.ipc2u.ru

www.moxa.pro

- 9 -

Grounding the EtherDevice Switch

Grounding and wire routing help limit the effects of noise due to

electromagnetic interference (EMI). Run the ground connection from the

ground screw to the grounding surface prior to connecting devices.

ATTENTION

This product is intended to be mounted to a well

-grounded

mounting surface, such as a metal panel.

Wiring the Relay Contact

The EDS-505A/508A has two sets of relay output—relay 1 and relay 2.

Each relay contact consists of two contacts of the terminal block on the

EDS-505A/508A’s top panel. Refer to the next section for detailed

instructions on how to connect the wires to the terminal block connector,

and how to attach the terminal block connector to the terminal block

receptor.

The fault circuit will open if:

1. A relay warning event is triggered, OR

2. The EDS-505A/508A is the Master of this Turbo Ring, and the Turbo

Ring is broken, OR

3. Start-up failure.

If none of these three conditions is met, the fault circuit will remain

closed.

Wiring the Redundant Power Inputs

The EDS-505A/508A unit has two sets of power inputs—power input 1

and power input 2. Top and front views of one of the terminal block

connectors are shown below.

Take the following steps to wire the redundant power inputs:

STEP 1: Insert the negative/positive DC wires into the V-/V+ terminals.

STEP 2: To keep the DC wires from pulling loose, use a small flat-blade

screwdriver to tighten the wire-clamp screws on the front of the terminal

block connector.

STEP 3: Insert the plastic terminal block connector prongs into the

terminal block receptor, which is located on the EDS’s top panel.

www.ipc2u.ru

www.moxa.pro

- 10 -

ATTENTION

Before connecting

the EDS to the DC power inputs

, make sure the

DC power source voltage is stable.

Wiring the Digital Inputs

The EDS-505A/508A unit has two sets of digital inputs, DI 1 and DI 2.

Each DI consists of two contacts of the 6-pin terminal block connector on

the EDS’s top panel. The remaining contacts are used for the EDS’s two

DC inputs. Top and front views of one of the terminal block connectors are

shown below.

Take the following steps to wire the digital inputs:

STEP 1: Insert the negative (ground)/positive DI wires into the ┴/I1

terminals.

STEP 2: To keep the DI wires from pulling loose, use a small flat-blade

screwdriver to tighten the wire-clamp screws on the front of the terminal

block connector.

STEP 3: Insert the plastic terminal block connector prongs into the

terminal block receptor, which is located on the EDS-505A/508A’s top

panel.

Communication Connections

EDS-508A models have 8 or 6 10/100BaseT(X) Ethernet ports, and 0

(zero) or 2 100BaseFX (SC/ST-type connector) fiber ports. EDS-505A

models have 5 or 3 10/100BaseT(X) Ethernet ports, and 0 (zero) or 2 100

BaseFX (SC/ST-type connector) fiber ports

10/100BaseT(X) Ethernet Port Connection

The 10/100BaseT(X) ports located on EDS’s front panel are used to

connect to Ethernet-enabled devices.

Next, we show pinouts for both MDI (NIC-type) ports and MDI-X

(HUB/Switch-type) ports, and also show cable wiring diagrams for

straight-through and cross-over Ethernet cables.

10/100Base T(x) RJ45 Pinouts

MDI Port Pinouts

MDI-X Port Pinouts

8-pin RJ45

Signal

Tx+

Tx-

Rx+

Rx-

Signal

Rx+

Rx-

Tx+

Tx-

www.ipc2u.ru

www.moxa.pro

Andere Handbücher für EDS-505A Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Moxa Technologies Netzwerk-Router Handbücher

Moxa Technologies

Moxa Technologies EtherDevice EDR-G903 Bedienungsanleitung

Moxa Technologies

Moxa Technologies TN-4900 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ToughNet TN-5516 Series Handbuch

Moxa Technologies

Moxa Technologies ioLogik E1200 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies UC-8112-LX-STK Bedienungsanleitung

Moxa Technologies

Moxa Technologies IKS-6324 Series Handbuch

Moxa Technologies

Moxa Technologies ETHERDEVICE EDS-308 Handbuch

Moxa Technologies

Moxa Technologies TN-5916 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies EDR-G9010 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies Managed Ethernet Switch/Extender Bedienungsanleitung

Moxa Technologies

Moxa Technologies EtherDevice EDS-P506A-4PoE Series Handbuch

Moxa Technologies

Moxa Technologies ioLogik E1210 Bedienungsanleitung

Moxa Technologies

Moxa Technologies EDS-408A Handbuch

Moxa Technologies

Moxa Technologies EtherDevice EDR-G903 Handbuch

Moxa Technologies

Moxa Technologies EtherDevice EDR-G902-T Bedienungsanleitung

Moxa Technologies

Moxa Technologies TSN-G5000 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies MAR-2000 Bedienungsanleitung

Moxa Technologies

Moxa Technologies EDS-305-M12 Handbuch

Moxa Technologies

Moxa Technologies EtherDevice EDS-508 Handbuch

Moxa Technologies

Moxa Technologies OnCell G4302-LTE4 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies SDS-3008 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies EDS-210A-1GTX-1GSFP-4SFP Bedienungsanleitung

Moxa Technologies

Moxa Technologies OnCell 5004-HSPA Bedienungsanleitung

Moxa Technologies

Moxa Technologies AirWorks AWK-1137C-EU Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung