National Instruments PCIe-5775 Bedienungsanleitung

GETTING STARTED GUIDE

PCIe-5775

12-Bit, 6.4 GS/s, 2-Channel PCI FlexRIO Digitizer Device

This document explains how to install, configure, test, and use the PCIe-5775. You can

program the PCIe-5775 with the following software options.

• FlexRIO driver software

• NI LabVIEW Instrument Design Libraries for FlexRIO (instrument design libraries)

Note Adapter modules are not installable or interchangeable on the PCIe-5775.

Contents

FlexRIO Documentation and Resources...................................................................................2

Verifying the System Requirements..........................................................................................2

Unpacking the Kit..................................................................................................................... 3

PCIe-5775 Kit Contents............................................................................................................ 3

Preparing the Environment....................................................................................................... 3

Installing the Software and Driver............................................................................................ 4

Installing the PCIe-5775........................................................................................................... 4

PCIe-5775 Front Panel and Pinout............................................................................................5

Configuring the PCIe-5775 in MAX........................................................................................ 8

FlexRIO Examples....................................................................................................................8

Accessing FlexRIO Examples.......................................................................................... 9

Block Diagram.......................................................................................................................... 9

Component-Level Intellectual Property (CLIP)......................................................................11

Making a Measurement with LabVIEW................................................................................. 11

Synchronization.......................................................................................................................11

Sharing Signals and Triggers with Another PCI Express FlexRIO Device....................12

Sharing Signals and Triggers with PCI Express Devices Using RTSI........................... 12

Troubleshooting...................................................................................................................... 13

What Should I Do if the PCIe-5775 Doesn't Appear in MAX?......................................13

What Should I Do if the PCIe-5775 Fails the Self-Test?................................................ 13

Where to Go Next................................................................................................................... 14

Worldwide Support and Services............................................................................................ 14

FlexRIO Documentation and Resources

Table 1. FlexRIO Documentation and Resources

Document/Resource Location Description

PCIe-5775 Getting

Started Guide (this

document)

Available at ni.com/

manuals.

Contains installation instructions and

basic programming instructions for

your PCIe-5775.

PCIe-5775

Specifications

Available at ni.com/

manuals.

Contains specifications for your

PCIe-5775.

PCIe-5775 Safety,

Environmental, and

Regulatory Information

Available at ni.com/

manuals.

Contains important safety,

environmental, and regulatory

information for your PCIe-5775.

LabVIEW FPGA Module

Help

Embedded in LabVIEW

Help and at ni.com/

manuals.

Contains information about the basic

functionality of the LabVIEW FPGA

Module.

FlexRIO Help Available at ni.com/

manuals.

Contains information about the FPGA

module front panel connectors and

I/O, programming instructions, and

I/O component-level IP (CLIP).

LabVIEW Examples Available in NI Example

Finder. In LabVIEW,

click Help»Find

Examples»Hardware

Input and Output»

FlexRIO.

Contains examples of how to run

FPGA VIs and Host VIs on your

device.

IPNet Located at ni.com/ipnet. Contains LabVIEW FPGA functions

and intellectual property to share.

FlexRIO product page Located at ni.com/flexrio. Contains product information and

data sheets for FlexRIO devices.

Verifying the System Requirements

To use the PCIe-5775, your system must meet certain requirements. For more information

about minimum system requirements, recommended system, and supported application

development environments (ADEs), refer to the readme, which is available on the software

media or online at ni.com/updates.

2| ni.com | PCIe-5775 Getting Started Guide

Unpacking the Kit

Notice To prevent electrostatic discharge (ESD) from damaging the device, ground

yourself using a grounding strap or by holding a grounded object, such as your

computer chassis.

1. Touch the antistatic package to a metal part of the computer chassis.

2. Remove the device from the package and inspect the device for loose components or any

other sign of damage.

Notice Never touch the exposed pins of connectors.

Note Do not install a device if it appears damaged in any way.

3. Unpack any other items and documentation from the kit.

Store the device in the antistatic package when the device is not in use.

PCIe-5775 Kit Contents

The following items are included in the device kit:

• PCIe-5775

• Documentation:

–Maintain Forced-Air Cooling Note to Users

–PCIe-5775 Getting Started Guide (this document)

–PCIe-5775 Safety, Environmental, and Regulatory Information

Preparing the Environment

Ensure the environment in which you are using the PCIe-5775 meets the following

specifications.

Operating environment

Ambient temperature range 0 °C to 45 °C (Tested in accordance with

IEC-60068-2-1 and IEC-60068-2-2. Meets

MIL-PRF-28800F Class 3 low temperature

limit and MIL-PRF-28800F Class 4 high

temperature limit.)

Relative humidity range 10% to 90%, noncondensing (Tested in

accordance with IEC 60068-2-56.)

Pollution Degree 2

PCIe-5775 Getting Started Guide | © National Instruments | 3

Indoor use only.

Note For complete specifications, refer to the specifications document for your

device at ni.com/manuals.

Installing the Software and Driver

Before installing your hardware, you must install the application software and instrument

driver. Visit NI FlexRIO Driver Supported Versions for FlexRIO Adapters and Modules to

determine which minimum software versions you need for your device. Install the software in

the following order:

1. Install LabVIEW.

Refer to the LabVIEW Installation Guide for installation instructions for LabVIEW and

system requirements for the LabVIEW software. Refer to the LabVIEW Upgrade Notes

for additional information about upgrading to the most recent version of LabVIEW for

Windows. Documentation for LabVIEW is available at ni.com/manuals.

2. Install the LabVIEW FPGA Module.

Refer to the LabVIEW FPGA Module Release and Upgrade Notes for installation

instructions and information about getting started with the LabVIEW FPGA Module.

Documentation for the LabVIEW FPGA Module is available at ni.com/manuals.

3. (Optional) Install the LabVIEW Real-Time Module.

Refer to the LabVIEW Real-Time Module Release and Upgrade Notes for system

requirements, installation instructions, and additional information about using the

LabVIEW Real-Time Module.

4. Install FlexRIO.

Refer to the FlexRIO Readme for system requirements and installation instructions for

FlexRIO. Documentation for FlexRIO is available at ni.com/manuals.

Installing the PCIe-5775

1. Power off and unplug the computer.

2. Access the computer system expansion slots. This step might require you to remove one

or more access panels on the computer case.

3. Locate a compatible slot and remove the corresponding slot cover on the computer back

panel.

4. Touch any metal part of the computer to discharge any static electricity.

5. Insert the module into the slot you selected. Gently rock the module in to place without

forcing it.

4| ni.com | PCIe-5775 Getting Started Guide

Figure 1. Module Installation

1. Module

2. System Expansion Slot

3. PC

6. Secure the module PCI Express mounting bracket to the computer chassis with two

bracket screws.

Note Because of the high mass of the PCIe-5775, installing the bracket

screws is recommended. Installing the bracket screws increases mechanical

stability and electrically connects the front panel to the chassis, which can

improve the signal quality and electromagnetic performance.

7. Connect the 6-pin PCI Express power connector from the power supply to the PCIe-5775.

8. Replace any access panels on the computer case.

9. Power on your computer.

PCIe-5775 Front Panel and Pinout

PCIe-5775 Front Panel

The following figure shows the PCIe-5775 front panel.

PCIe-5775 Getting Started Guide | © National Instruments | 5

Figure 2. PCIe-5775 Front Panel

PCIe-5775

DIO

4 Vpp MAX

REF/

CLK IN

4 Vpp MAX

AI0

AI1

The following table describes the signal connections for the PCIe-5775.

6| ni.com | PCIe-5775 Getting Started Guide

Connector Description Function

DIO Molex Nano-Pitch DIO

connector

Multi-signal DIO connector that provides

access to FPGA multi-gigabit transceivers

(MGTs) and general-purpose LVCMOS

signals.

AI 0 Standard SMA female

connector

Analog input connection.

AI 1

REF/CLK IN Standard SMA female

connector

Input for an external Reference Clock or

Sample Clock.

Digital I/O Pinout

The following figure shows the Digital I/O (DIO) connector pinout.

Figure 3. Digital I/O Connector

A10

A11

A12

A13

A14

A15

A16

A17

A18

A19

A20

A21

B10

B11

B12

B13

B14

B15

B16

B17

B18

B19

B20

B21

Reserved

GND

MGT Rx+ 0

MGT Rx– 0

GND

MGT Rx+ 1

MGT Rx– 1

GND

DIO 4

DIO 5

GND

DIO 0

DIO 1

GND

MGT Rx+ 2

MGT Rx– 2

GND

MGT Rx+ 3

MGT Rx– 3

GND

5.0 V

5 V

GND

MGT Tx+ 0

MGT Tx– 0

GND

MGT Tx+ 1

MGT Tx– 1

GND

DIO 6

DIO 7

GND

DIO 2

DIO 3

GND

MGT Tx+ 2

MGT Tx– 2

GND

MGT Tx+ 3

MGT Tx– 3

GND

Reserved

The following table lists the available pins on the DIO connector.

PCIe-5775 Getting Started Guide | © National Instruments | 7

Signal Type Direction

MGT Tx± <0..3>1Xilinx UltraScale GTH Output

MGT Rx± <0..3>1Xilinx UltraScale GTH Input

DIO <0..7> Single-ended Bidirectional

5.0 V DC Output

GND Ground —

Notice The maximum input signal levels are valid only when the module is

powered on. To avoid permanent damage to the PCIe-5775, do not apply a signal to

the device when the module is powered down.

Notice Connections that exceed any of the maximum ratings of any connector on

the PCIe-5775 can damage the device and the system. NI is not liable for any

damage resulting from such connections.

Configuring the PCIe-5775 in MAX

Use Measurement & Automation Explorer (MAX) to configure your NI hardware. MAX

informs other programs about which NI hardware products are in the system and how they are

configured. MAX is automatically installed with FlexRIO.

1. Launch MAX.

2. In the configuration tree, expand Devices and Interfaces to see the list of installed NI

hardware.

Note If you do not see your module listed, press <F5> to refresh the list of

installed modules. If the module is still not listed, power off the system, ensure

the module is correctly installed, and restart.

3. Record the identifier MAX assigns to the hardware. Use this identifier when

programming the PCIe-5775.

4. Self-test the hardware by selecting the item in the configuration tree and clicking Self-

Test in the MAX toolbar.

The MAX self-test performs a basic verification of hardware resources.

FlexRIO Examples

FlexRIO includes several example applications for LabVIEW. These examples serve as

interactive tools, programming models, and as building blocks in your own applications.

1MGTs are available only on devices with KU040 and KU060 FPGAs.

8| ni.com | PCIe-5775 Getting Started Guide

Accessing FlexRIO Examples

FlexRIO examples are available in LabVIEW's NI Example Finder. Complete the following

steps to access the examples by task.

1. In LabVIEW, click Help»Find Examples.

2. In the NI Example Finder window that appears, click Hardware Input and Output»

FlexRIO.

The examples are sorted by task. Click on an example and refer to the Information

window for a description of the example. Refer the Requirements window for a list of

hardware devices that can run the example.

You can also click the Search tab to search all installed examples by keyword. For

example, search for FlexRIO to locate all FlexRIO examples.

Examples also are available online that demonstrate FlexRIO basics, such as using DRAM,

acquiring data from adapter modules, and performing high throughput streaming. Refer to

ni.com/examples for these examples and for more information.

Block Diagram

The following figure shows a block diagram of the carrier portion of the PCIe-5775 (KU035

FPGA version).

Figure 4. Carrier Block Diagram (KU035)

DIO Connector

(Front Panel)

Adapter Module

Connector

+5 V

+1.8 V

+12 V

GPIO

Configuration, GPIO

MGTs

Reference Clock

Power Supplies

Flash

FPGA

Triggers

Clk 100

Gen3 x8 PCIe

+12 V, +3.3 V

+12 V

Clk 10

Module Clocking

Synchronization

PLL

DRAM Bank 0

(2 GB)

DRAM Bank 1

(2 GB)

Synchronization

Connector

PCIe

Connectors

PCIe-5775 Getting Started Guide | © National Instruments | 9

The following figure shows a block diagram of the carrier portion of the PCIe-5775 (KU040

and KU060 FPGA versions).

Figure 5. Carrier Block Diagram (KU040 and KU060)

DIO Connector

(Front Panel)

Adapter Module

Connector

+5 V

+1.8 V

+12 V

GPIO

Configuration, GPIO

MGTs

Reference Clock

Power Supplies

Flash

FPGA

Triggers

Clk 100

Gen3 x8 PCIe

+12 V, +3.3 V

+12 V

Clk 10

Module Clocking

Synchronization

PLL

DRAM Bank 0

(2 GB)

DRAM Bank 1

(2 GB)

Synchronization

Connector

PCIe

Connectors

MGTs

The following figure shows a block diagram of the I/O portion of the PCIe-5775.

Figure 6. PCIe-5775 Block Diagram

EXTERNAL REF/SCLK

CLK IN SMA

AI1 SMA

ADC12DJ3200

Dual 12-bit, 3.2 GS/s

Single 12-bit, 6.4 GS/s

AI0 SMA

ANALOG INPUT

AC (Balun)

Coupled Path

AC (Balun)

Coupled Path

Adapter Module

Connector

CLOCKING

10 | ni.com | PCIe-5775 Getting Started Guide

Inhaltsverzeichnis

Andere National Instruments PCI-Karte Handbücher

National Instruments

National Instruments 6509 Bedienungsanleitung

National Instruments

National Instruments PCI-GPIB Bedienungsanleitung

National Instruments

National Instruments IMAQ PCI-1422 Bedienungsanleitung

National Instruments

National Instruments IMAQ PCI-1409 Bedienungsanleitung

National Instruments

National Instruments NI PCIe-1429 Bedienungsanleitung

National Instruments

National Instruments NI PCI-1424 Bedienungsanleitung

National Instruments

National Instruments PCIe-6593 Bedienungsanleitung

National Instruments

National Instruments NI 6608 Bedienungsanleitung

National Instruments

National Instruments PXI-1407 Bedienungsanleitung

National Instruments

National Instruments PXI Express NI PXIe-1073 Bedienungsanleitung

National Instruments

National Instruments PCI-1407 Bedienungsanleitung

National Instruments

National Instruments PCI-8361 Bedienungsanleitung

National Instruments

National Instruments IMAQ PCI-1424 Bedienungsanleitung

National Instruments

National Instruments PCI-FBUS Bedienungsanleitung

National Instruments

National Instruments R Series Bedienungsanleitung

National Instruments

National Instruments 78 R Series Kurzanleitung

National Instruments

National Instruments DAQ PCI-4451 Bedienungsanleitung

National Instruments

National Instruments MXI-Express x4 Series Bedienungsanleitung

National Instruments

National Instruments NI 9425 Bedienungsanleitung

National Instruments

National Instruments PCI-FBUS Bedienungsanleitung

National Instruments

National Instruments IMAQ PXI-1411 Bedienungsanleitung

National Instruments

National Instruments NI 6602 Bedienungsanleitung

National Instruments

National Instruments RS-232 Bedienungsanleitung

National Instruments

National Instruments MXI PCIe-8375 Gebrauchsanweisung

Beliebte PCI-Karte Handbücher anderer Marken

ERMA

ERMA SSI 1417 Bedienungsanleitung

SIIG

SIIG CyberSerial Dual PCI Montageanleitung

I-Bus

I-Bus IBC2602 Bedienungsanleitung

Exsys

Exsys EX-60102 Bedienungsanleitung

Chelsio Communications

Chelsio Communications T5 Series Bedienungsanleitung

Conrad Electronic

Conrad Electronic 97 46 71 Bedienungsanleitung

Micro Innovations

Micro Innovations USB650A Bedienungsanleitung

KTI Networks

KTI Networks KF-310 Bedienungsanleitung

Asus

Asus SpaceLink WL230 Bedienungsanleitung

SIIG

SIIG SC2475 Bedienungsanleitung

TRENDnet

TRENDnet TEW-703PI Bedienungsanleitung

Belkin

Belkin F5D7000F Bedienungsanleitung

Pericom

Pericom PI7C7100 Bedienungsanleitung

ADLINK Technology

ADLINK Technology cPCI-3548 Bedienungsanleitung

Digium

Digium TE200 Series Bedienungsanleitung

Allo.com

Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung

Western Digital

Western Digital FireWire PCI Adapter Bedienungsanleitung

Pyle

Pyle Gamelink PLINK1 Bedienungsanleitung