Netvox R718F Bedienungsanleitung

Model：R718F

Wireless Reed Switch Open/Close Detection Sensor

Wireless Reed Switch Open/Close Detection

Sensor

R718F

User Manual

This document contains proprietary technical information which is the property of NETVOX Technology. It shall be maintained in strict

confidence and shall not be disclosed to other parties, in whole or in part, without written permission of NETVOX Technology. The

specifications are subject to change without prior notice.

Table of Content

1. Introduction ......................................................................................................................................................................2

2. Appearance ....................................................................................................................................................................... 2

3. Main Features...................................................................................................................................................................3

4. Set up Instruction..............................................................................................................................................................3

5. Data Report.......................................................................................................................................................................5

6. Installation ........................................................................................................................................................................ 8

7. Information about Battery Passivation...........................................................................................................................10

7.1 To determine whether a battery requires activation................................................................................................10

7.2 How to activate the battery ..................................................................................................................................... 10

8. Important Maintenance Instruction................................................................................................................................ 11

1. Introduction

R718F is a wireless long-distance reed switch detection device which is Class A devices based on the LoRaWANTM protocol of Netvox

and is compatible with the LoRaWAN protocol.

LoRa Wireless Technology:

LoRa is a wireless communication technology dedicated to long distance and low power consumption. Compared with other

communication methods, LoRa spread spectrum modulation method greatly increases to expand the communication distance. Widely

used in long-distance, low-data wireless communications. For example, automatic meter reading, building automation equipment,

wireless security systems, industrial monitoring. Main features include small size, low power consumption, transmission distance,

anti-interference ability and so on.

LoRaWAN:

LoRaWAN uses LoRa technology to define end-to-end standard specifications to ensure interoperability between devices and gateways

from different manufacturers.

2. Appearance

Indicator

Function Key

Reed Switch

Magnet

3. Main Features

Adopt SX1276 LoRa wireless communication module

2 ER14505 battery AA SIZE (3.6V / section) parallel power supply

Trigger the magnetic sensor, and the device can send the alarm

The base is attached with a magnet that can be attached to a ferromagnetic material object

Host body protection class IP65/67 (optional)

Compatible with LoRaWANTM Class A

Frequency hopping spread spectrum

Configuration parameters can be configured via a third-party software platform, data can be read and alerts can be set via SMS text

and email (optional)

Applicable to third-party platforms: Actility/ThingPark, TTN, MyDevices/Cayenne

Low power consumption and long battery life

Note*:

Battery life is determined by the sensor reporting frequency and other variables, please refer to

http://www.netvox.com.tw/electric/electric_calc.html

On this website, users can find battery life of various models in different configurations.

4.Set up Instruction

On/Off

Power on Insert batteries. (users may need a screwdriver to open)

Turn on Press and hold the function key for 3 seconds till the green indicator flashes once.

Turn off (Restore to factory setting) Press and hold the function key for 5 seconds and the green indicator flashes 20 times.

Power off Remove Batteries.

Note:

1. Remove and insert the battery: the device is in the turn-off state by default.

2. The first 5 seconds after power on, the device is in engineering testing mode.

3. Every time, after remove and reinsert the battery, the device is in a turn-off state and

need to power on again.

4. On/off interval is suggested to be about 10 seconds to avoid the interference of

capacitor inductance and other energy storage components.

Network Joining

Never joined the network

Turn on the device to search the network.

The green indicator stays on for 5 seconds: success

The green indicator remains off: fail

Had joined the network

(Not restore to the factory setting)

Turn on the device to search the previous network.

The green indicator stays on for 5 seconds: success

The green indicator remains off: fail

Fail to join the network

1. Suggest removing batteries if the device is not used to save power.

2. Suggest checking the device registration information on the gateway

or consulting your platform server provider if the device fails to join the network.

Function Key

Press and hold for 5 seconds

Restore to factory setting / Turn off

The green indicator flashes 20 times: success

The green indicator remains off: fail

Press once The device is in the network: green indicator flashes once and sends a report

The device is not in the network: green indicator remains off

Sleeping Mode

The device is on and in the network

Sleeping period: Min Interval.

When the reportchange exceeds setting value or the state changes: send a data report

according to Min Interval.

The device is turn on but not join in the

network

1. Suggest removing batteries if the device is not used to save the power.

2. Suggest checking the device registration information on the gateway.

Low Voltage Warning

Low Voltage 3.2V

5. Data Report

Data report configuration and sending period are as following:

Min Interval

(Unit:second)

Max Interval

(Unit:second) Reportable Change Current Change≥

Reportable Change

Current Change＜

Reportable Change

Any number between

1~65535

Any number between

1~65535 Can not be 0 Report

per Min Interval

Report

per Max Interval

The device will immediately send a version packet report along with an uplink packet including reed switch status and battery

voltage.

The device sends data according to the default configuration before any other configuring.

Default setting:

MaxTime : Max Interval = 60 min = 3600s

MinTime : Min Interval = 60 min = 3600s (Default: Every Min Interval will detect the current voltage.)

BatteryVoltageChange: 0x01 (0.1V)

Reed switch trigger status:

When the magnet closes to the reed switch, it will report the status “0”

*The distance between the magnet and the reed switch is less than 2 cm

When the magnet removes the reed switch, it will report the status “1”

*The distance between the magnet and the reed switch is greater than 2 cm

Note:

The cycle of the device sending the data report is according to the default.

The interval between two reports must be the Mintime.

Please refer Netvox LoRaWAN Application Command document and Netvox Lora Command Resolver

http://loraresolver.netvoxcloud.com:8888/page/index to resolve uplink data.

Example of ConfigureCmd

FPort：0x07

Bytes 1 1 Var (Fix =9 Bytes)

CmdID DeviceType NetvoxPayLoadData

CmdID– 1 byte

DeviceType– 1 byte – Device Type of Device

NetvoxPayLoadData– var bytes (Max=9bytes)

1. Configure device parameters MinTime = 1min, MaxTime = 1min, BatteryChange = 0.1v

Downlink: 011D003C003C0100000000

Device returns:

811D000000000000000000 (configuration successful)

811D010000000000000000 (configuration failed)

2. Read device parameters

Downlink: 021D000000000000000000

Device returns:

821D003C003C0100000000 (current configuration parameters)

Description Device CmdID Device

Type NetvoxPayLoadData

ConfigReport

Req

R718F

0x01

0x1D

MinTime

(2bytes Unit: s) MaxTime

(2bytes Unit: s) BatteryChange

(1byte Unit: 0.1v) Reserved

(4Bytes, Fixed 0x00)

ConfigReport

Rsp 0x81 Status

(0x00_success) Reserved

(8Bytes, Fixed 0x00)

ReadConfig

ReportReq 0x02 Reserved

(9Bytes, Fixed 0x00)

ReadConfig

ReportRsp 0x82 MinTime

(2bytes Unit: s) MaxTime

(2bytes Unit: s) BatteryChange

(1byte Unit: 0.1v) Reserved

(4Bytes, Fixed 0x00)

Example for MinTime/MaxTime logic:

Example#1 based on MinTime = 1 Hour, MaxTime= 1 Hour, Reportable Change i.e. BatteryVoltageChange=0.1V

MaxTime MaxTime

Sleeping(MinTime) Sleeping(MinTime)

Note: MaxTime=MinTime. Data will only be report according to MaxTime (MinTime) duration regardless BatteryVoltageChange value.

Example#2 based on MinTime = 15 Minutes, MaxTime= 1 Hour, Reportable Change i.e. BatteryVoltageChange= 0.1V.

MaxTime

Sleeping(MinTime)sleeping sleeping sleeping

0H 15th M 30th M 45th M 1H 2H

Example#3 based on MinTime = 15 Minutes, MaxTime= 1 Hour, Reportable Change i.e. BatteryVoltageChange= 0.1V.

MaxTime

sleeping sleeping ...

0H 15th M 30th M 45th M 1H 1H 10th M 1H 25th M 1H 40th M 1H 55th M 2H 10th M

Notes :

1) The device only wakes up and performs data sampling according to MinTime Interval. When it is sleeping, it does not collect data.

2) The data collected is compared with the last data reported. If the data variation is greater than the ReportableChange value, the device reports

according to MinTime interval. If the data variation is not greater than the last data reported, the device reports according to MaxTime interval.

3) We do not recommend to set the MinTime Interval value too low. If the MinTime Interval is too low, the device wakes up frequently and the battery

will be drained soon.

4) Whenever the device sends a report, no matter resulting from data variation, button pushed or MaxTime interval, another cycle of MinTime/MaxTime

calculation is started.

Wakes up and

collects data

3.6V

Does not report

Wakes up and

collects data

3.6V

Does not report

Wakes up and

collects data

3.6V

Does not report

Wakes up and

collects data

REPORTS 3.6V

Wakes up and

collects data

REPORT 3.6V

Wakes up and

collects data

REPORTS 3.6V

Wakes up and collects data

3.5V |3.5-3.6|=0.1

REPORTS 3.5V

Wakes up and

collects data

3.5V

Does not report

Wakes up and

collects data

3.5V

Does not report

Wakes up and

collects data

3.5V

Does not report

Wakes up and

collects data 3.5V

Does not report

Wakes up and

collects data

3.5V

Does not report

Wakes up and

collects data

REPORTS 3.5V

Wake up and collects data

REPORTS 3.6V

Wakes up and collects data

REPORTS 3.6V

Wakes up and collects data

REPORTS 3.6V

Wakes up and

collects data

3.6V

Does not report

Users push the button,

REPORTS 3.5V.

Recalculate MaxTime.

6. Installation

1. R718F has a built-in magnet (as the figure below). When

installed, it can be attached to the surface of an object with

iron which is convenient and quick.

To make the installation more secure, use screws (purchased

separately) to secure the unit to a wall or other surface (as the

figure below).

Note:

Do not install the device in a metal shielded box or in an

environment with other electrical equipment around it to

avoid affecting the wireless transmission of the device.

R718F is suitable below scenarios:

Door, window

Machine room door

Archives

Closet

Refrigerators and freezers

Cargo ship hatch

Garage door

Public toilet door

The place needs to detect the opening and closing status.

2. When the door or window is opened, the reed switch

probe is separated from the magnet, and the device sends

an alarm message about the opening.

When the door or window is closed, the reed switch probe

and the magnet get closer, and the device restores to the

normal state and sends a state message about the closing.

2. Tear off the 3M glue at the bottom of the reed switch probe

and the magnet (as the red frame in the figure above). Then,

stick the reed switch probe to the door and is parallel to the

magnet (as the figure on the right).

Note: The installation distance betwee

n the reed switch probe

and the magnet should be less than 2cm.

Magnet

Reed Switch

When installing the device, the magnet must move along the X axisrelative to the sensor.

If the magnet moves along the Y axis relative to the sensor, it will cause repeated reports due to the magnetic field.

Note:

Please do not disassemble the device unless it is required to replace the batteries.

Do not touch the waterproof gasket, LED indicator light, function keys when replacing the batteries. Please use suitable screwdriver to

tighten the screws (if using an electric screwdriver, it is recommended to set the torque as 4kgf) to ensure the device is impermeable.

Inhaltsverzeichnis

Andere netvox Zubehör Handbücher

netvox

netvox ZigBee Z801WLS Bedienungsanleitung

netvox

netvox R718DB2 Bedienungsanleitung

netvox

netvox R311D Bedienungsanleitung

netvox

netvox R718PB13 Bedienungsanleitung

netvox

netvox R72632A01 Bedienungsanleitung

netvox

netvox R718CT Bedienungsanleitung

netvox

netvox R72632A Bedienungsanleitung

netvox

netvox R718LB2 Bedienungsanleitung

netvox

netvox R311B Bedienungsanleitung

netvox

netvox RA0723 Bedienungsanleitung

netvox

netvox R72616A Bedienungsanleitung

netvox

netvox ZigBee Z311G Bedienungsanleitung

netvox

netvox R718PQA Bedienungsanleitung

netvox

netvox R718PB15A Bedienungsanleitung

netvox

netvox R311FA1 Bedienungsanleitung

netvox

netvox R718G Bedienungsanleitung

netvox

netvox R718CK2 Bedienungsanleitung

netvox

netvox R718EA Bedienungsanleitung

netvox

netvox R311A Bedienungsanleitung

netvox

netvox R712 Bedienungsanleitung

netvox

netvox R718B1 Series Bedienungsanleitung

netvox

netvox R718NL3 Series Bedienungsanleitung

netvox

netvox R718E Bedienungsanleitung

netvox

netvox R718EA Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung

netvox R718F Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken