Olympus CK40M FRAME Betriebsanleitung

COMPACT INVERTED

METALLURGICAL MICROSCOPE

CK40M FRAME

REPAIR MANUAL

OLYMPUS

COMPACT INVERTED METALLURGICAL MICROSCOPE

CK40M FRAME

REPAIR MANUAL

OLYMPUS

CK40M

CONTENTS

A. OUTLINE OF PRODUCT

1. Outline ------------------------------------------------------------------------------------ A-1

2. Features----------------------------------------------------------------------------------- A-1

3. Using conditions------------------------------------------------------------------------- A-1

4. Specifications ---------------------------------------------------------------------------- A-3

5. Dimensions ------------------------------------------------------------------------------- A-4

B. DISASSEMBLY AND ASSEMBLY PROCEDURES

1. CK40M frame (1) ----------------------------------------------------------------------- B-1

2. CK40M frame (2) ----------------------------------------------------------------------- B-3

3. CK40M frame (3) ----------------------------------------------------------------------- B-5

4. CK4M-REH------------------------------------------------------------------------------ B-7

5. CK4-J------------------------------------------------------------------------------------- B-9

6. CK4M-MA------------------------------------------------------------------------------- B-11

C. REPAIR PROCEDURE

1. Adjustment procedure------------------------------------------------------------------- C-1

2. Preparation for adjustment ------------------------------------------------------------- C-2

3. Absolute optical axis adjustment------------------------------------------------------- C-3

4. Stage parallelism adjustment ----------------------------------------------------------- C-7

5. CK4M-MA illumination center adjustment ------------------------------------------- C-8

6. MA-AS center adjustment-------------------------------------------------------------- C-10

7. Parfocality adjustment------------------------------------------------------------------- C-12

8. Exit pupil center check------------------------------------------------------------------ C-14

9. Fine focus sensitivity check------------------------------------------------------------- C-15

D. JIGS AND TOOLS

1. List of jigs and tools--------------------------------------------------------------------- D-1

E. LUBRICANTS AND CHEMICALS

1. List of lubricants------------------------------------------------------------------------- E-1

2. List of chemicals------------------------------------------------------------------------- E-1

CK40M A. OUTLINE OF PRODUCT

A-1

1. Outline

Compact inverted metallurgical microscope, which is flexible to interchange observation tubes

(1) Target market, usage

Industrial inspection market (Sample observation and inspection, and abrasive inspection

at plants and iron works)

(2) External standards acquired

•The product complies with UL and GS. The CE mark was self-declared. FCC is not

applicable.

a) IEC1010-1

b) UL3101-1

c) EN55011 Group 1, class B

d) EN50082-2 (1995)

e) EN61326

(3) Service life

8 years

2. Features

(1) It has only the minimum essential functions required for brightfield and simple polarized

light.

(2) It is easy to operate because it does not have many control parts.

(3) It can be combined with TBI desirable from the ergonomics viewpoint. (Comfortable

standing or seated posture)

(4) It can be used in combination with DP series digital camera.

3. Using conditions

(1) Operating environment

Temperature: 0 - 40°C

Humidity: 30 - 90%

(2) Range of combinations

•When it is combined with CK40-TBI (tilting binocular tube), it is used for field number

18 only. (Flatness is lowered at field number 20.)

CK40M A. OUTLINE OF PRODUCT

A-2

•When CK40-MVR (mechanical stage) is mounted on the right side (seen from the

operation knob side) of the plane stage, CK40M-MS (stage mirror) cannot be mounted

on there.

•When it is combined with CK40M-CP (stage plate), the observation range depends on

the objective. In some cases, the CK40M-CP is pushed up by changing to a high

magnification objective. (High magnification)

Combination with MDPlan80X:

The narrow part in the clip hole (shape: tear drop) of the stage plate cannot be

observed. The part around φ15 mm in the clip hole of CK40M-CP is pushed up

by changing to the objective.

Combination with MDPlan50X:

When the clip hole (shape: tear drop) of the stage plate is positioned in the non-

breadthwise direction (when it is not combined with CK40M-MVR), the part

around φ15 mm in the clip hole of CK40M-CP is pushed up in some cases by

changing to the objective.

•When DP10 is combined with NFK2.5X, density may be uneven on one side of the field.

This is a restriction of DP10.

•When it is combined with a TV camera including a photo element, a spot flare may

occur on the TV monitor at a high-reflection mirror when the objective 50X or higher +

NFK2.5X or 3X are used.

(This is caused by surface reflection of the CCD surface and the NFK lens.)

•When it is combined with a TV camera including a 2/3 inch or larger photo element and

NFK1.67X, vigentting will occur at the four corners of the screen.

•When it is combined with CK40M-PO, the polarizer can be rotated more than 90°from

the crossed Nicol (total extinction) position to the index side, but less than 90°in the

opposite direction.

(3) This model can be combined with the following objectives:

MDAch10X

MDAch20X

MDAch50X

MDPlan5X

MDPlan10X

MDPlan20X

MDPlan40X

MDPlan50X

MDPlan80X

This model cannot be combined with the following objectives: LB (long barrel) objectives

other than the above, SB (short barrel) objectives, and UIS objectives.

CK40M A. OUTLINE OF PRODUCT

A-3

(4) This model can be combined with the following observation tubes:

CH3-BI, CH3-TR45, CK40-TBI

4. Specifications

Item Specifications Remarks

1Focus •Revolving nosepiece vertical movement (Stage fixed type)

•Coaxial coarse/fine adjustment knobs (Coarse adjustment with

torque adjustment mechanism)

•Roller guide type

•Stroke: 9 mm from the focus position at 1 mm above stage top

7 mm upward and 2 mm downward

•Stroke by 1 rotation of coarse adjustment knob: 36.8 mm

•Stroke by 1 rotation of fine adjustment knob: 0.2 mm

2Revolving

nosepiece Quadruple

3Stage Plane stage

160 (L) ×250 (W) mm, stage insert plate provided (no accessory)

A mechanical stage and stage clips can be mounted.

Illumination

system Light source

6 V 30 W halogen bulb (6 V 30 W HAL)

Average service life of bulb: 100 hours

U-LS30-3-4 lamp socket

•Aperture diaphragm (AS)

Lever control type

Adjustable from φ15 mm (minimum) to φ55 mm (maximum)

•Filter slot

Drop-in type

φ25 mm filter: Up to thickness of 25 mm

•Polarizer slot

Drop-in type

•AS projection magnification (AS →Assumed objective exit

pupil): 1.71X

•Light source projection magnification (Filament →Assumed

exit pupil): 3.11X

Maker: Philips

Model No. 5761

Cover provided

(Filter/polarizer

slot)

5Power supply Continuous light intensity control by variable resistance

Rated output voltage: 6 V

Built-in rated input voltage selector switch

100/110-120 V for F100

220/230-240 V for F200

Rated input frequency:

50 Hz, 60 Hz

Built-in fuse

Fuse rating: 0.6/0.3 A

Rated load:

6 V 30 W halogen bulb

(PHILIPS 5761)

Power consumption: 72 VA (W)

6Weight 7.5 kg

CK40M A. OUTLINE OF PRODUCT

A-4

5. Dimensions

236

476

309

572

360 (Eye point height)

354

195

Unit: mm

CK40M B. DISASSEMBLY AND ASSEMBLY PROCEDURES

B-1

1. CK40M frame (1)

„

†

•

‡

…

‰

‚

CK40M-MS

Coated

surface

No. Parts name Screw Grease Adhesive Remarks

•SEAL (3 pcs.)

‚CK4M-MA AB4X12SA (*1) 3 pcs. Adjustment (C-8, 9)

ƒHALF MIRROR

MOUNT ANU3X4SA (*2) 2 pcs.

„PLATE 3PUK2X3SA (*3) 4 pcs.

AB3X4SA (*4) 1 pc.

…REFLECTION

PROTECTOR For the reflection protector

mounting position, refer to (1)

on the next page.

†HALF MIRROR OT1873 For the half mirror mounting

position, refer to (2) on the next

page.

‡STAGE INSERT

PLATE

ˆSEAL

‰STAGE 40M AB5X15SA (*5) 4 pcs.

ŠKNOB AB5X12SA (*6) 2 pcs

CK40M-MS The mounting position of

CK40M-MS depends on that of

the X/Y knob of the stage.

CK40M B. DISASSEMBLY AND ASSEMBLY PROCEDURES

B-2

(1) Reflection protector (AD378100) mounting position

Double-coated adhesive tape

Longer

Place the reflection protector on

the plate and stick it, aligning the

right and left widths of reflection

protector to the center hole.

Reflection protector (AD378100)

Plate (AD377800)

(2) Half mirror (LP148000) mounting position

Set the positioning jig (CK40MKC01) on the half

mirror mount. Determine the half mirror position by

pushing the half mirror to the CK40MKC01 and

apply silicone adhesive (OT1873) to the four corners

(bevelled parts) of the half mirror.

The range of adhesive coating should be at least

7 mm per location.

Positioning jig

(CK40MKC01)

Half mirror mount

(AD377700)

Make sure that the coated

surface faces down.

Adhesive (4 locations)

Half mirror (LP148000)

V-block (K2347)

Positioning jig

(CK40MKC01)

Fix the half mirror using jigs

(CK40MKC01, K2347).

Half mirror

(LP148000)

CK40M B. DISASSEMBLY AND ASSEMBLY PROCEDURES

B-3

2. CK40M frame (2)

…

‡

†

‰



•

„

‚

Note: Avoid disassembling parts †, ‡, and ˆunless necessary.

When mounting the assembled parts of †, ‡, and ˆto TR body …, screw

this assembly in completely to the end (in case where these parts are

disassembled).

No. Parts name Screw Grease Adhesive Remarks

•

KNOB

OT2008

‚

SEAL

COVER-R

3PUTB2X4SA (*1) 1 pc.

Don’t tighten the screw (*1)

„

COVER-L

CUKSK3X8SA (*2) 2 pcs.

excessively because it is a tap screw.

…

TR BODY

AB3X14SA (*3) 4 pcs.

BNW3SA (*4) 4 pcs.

•Refer to the procedure on “3. Absolute

optical axis adjustment”(C-3).

†

LENS ASS’Y

ACU3X6SA (*5) 1 pc.

OT2144

OT1131

Apply grease to the screw thread of the

lens ass’y

†

Apply adhesive to the screw (*5).

•Refer to the procedure on“7. Parfocality

adjustment”(C-12).

‡

SPACER

LENS ASS’Y

‰

PRISM

OT1873

•Refer to the procedure on “3. Absolute

optical axis adjustment”(C-3).

For the mounting position, refer to (3) on

the next page.

Inhaltsverzeichnis

Andere Olympus Mikroskop Handbücher

Olympus

Olympus BHS Bedienungsanleitung

Olympus

Olympus MIC-D Bedienungsanleitung

Olympus

Olympus SZ-III Bedienungsanleitung

Olympus

Olympus IX2-DSU Bedienungsanleitung

Olympus

Olympus CHA-P Bedienungsanleitung

Olympus

Olympus CHS Bedienungsanleitung

Olympus

Olympus BHA-P Bedienungsanleitung

Olympus

Olympus CHBS Bedienungsanleitung

Olympus

Olympus SZX16 Bedienungsanleitung

Olympus

Olympus JM Bedienungsanleitung

Olympus

Olympus DP21-SAL Benutzerhandbuch

Olympus

Olympus CX41 Installationsanleitung

Olympus

Olympus BX63 Bedienungsanleitung

Olympus

Olympus SZX-DA Bedienungsanleitung

Olympus

Olympus SZ-ADD Bedienungsanleitung

Olympus

Olympus BH2 Series Montageanleitung

Olympus

Olympus FH Bedienungsanleitung

Olympus

Olympus BXC-CBB Bedienungsanleitung

Olympus

Olympus U-DA Bedienungsanleitung

Olympus

Olympus CX43-RFAB Bedienungsanleitung

Olympus

Olympus BX41 Bedienungsanleitung

Olympus

Olympus DP73 Bedienungsanleitung

Olympus

Olympus CX41 Bedienungsanleitung

Olympus

Olympus CX21LED Bedienungsanleitung

Beliebte Mikroskop Handbücher anderer Marken

Thermo Scientific

Thermo Scientific Nicolet iN10 Leitfaden

National

National DC3-163 Bedienungsanleitung

KERN Optics

KERN Optics OPE-1 Bedienungsanleitung

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Bedienungsanleitung

Prior

Prior Lux POL Bedienungsanleitung

Opitec

Opitec Smartscoop 115615 Bedienungsanleitung

KERN

KERN OPO-1 Bedienungsanleitung

Topcon

Topcon SP-1P Bedienungsanleitung

Motic

Motic PA43 Bedienungsanleitung

Leica

Leica DVM5000 Benutzerhandbuch

MshOt

MshOt MZ62 Bedienungsanleitung

KERN Optics

KERN Optics OZR-5 Bedienungsanleitung

VWR

VWR VisiScope 384 Series Bedienungsanleitung

Nikon

Nikon ECLIPSE E200 POL Bedienungsanleitung

Leica

Leica DI C800 Handbuch

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

Leica

Leica FL560 Bedienungsanleitung