Olympus SZX-AR1 Referenzhandbuch

SZX-AR1

Software Help

Edition 01

1　Operation procedure of the software …………………………………………… 1　

1.1　Basic operation of the software …………………………………………………………………………………… 1　

■Windows OS shortcut keys ………………………………………………………………………………………… 1　

■Explanatory note …………………………………………………………………………………………………… 1　

■Create operating procedures ……………………………………………………………………………………… 2　

■Start the task………………………………………………………………………………………………………… 2　

■Start the training …………………………………………………………………………………………………… 4　

1.2　File operation ……………………………………………………………………………………………………… 5　

■Creating a new file …………………………………………………………………………………………………… 5　

■Loading a file ………………………………………………………………………………………………………… 5　

■Saving a file ………………………………………………………………………………………………………… 5　

■Creating barcodes (QR codes) ……………………………………………………………………………………… 6　

1.3　Slide operation ……………………………………………………………………………………………………… 6　

■Adding or deleting slides …………………………………………………………………………………………… 6　

■Reordering slides …………………………………………………………………………………………………… 7　

■Slide forward/backward……………………………………………………………………………………………… 7　

■Copying and pasting slides ………………………………………………………………………………………… 8　

■Undoing slide operations …………………………………………………………………………………………… 8　

■Slide background …………………………………………………………………………………………………… 9　

■Screen display settings ……………………………………………………………………………………………… 9　

1.4　Drawing operation…………………………………………………………………………………………………… 10　

■Editing object styles ………………………………………………………………………………………………… 10　

1.5　Various contents operations ……………………………………………………………………………………… 11　

■Content menu ……………………………………………………………………………………………………… 11　

■Pen drawing ………………………………………………………………………………………………………… 13　

■Adding shapes ……………………………………………………………………………………………………… 13　

Lines, arrows, rectangles, circles, and text ………………………………………………………………………… 13　

Picture ……………………………………………………………………………………………………………… 14　

Video ………………………………………………………………………………………………………………… 14　

■Adding gauges ……………………………………………………………………………………………………… 15　

Rectangular gauge …………………………………………………………………………………………………… 15　

Circular gauge ………………………………………………………………………………………………………… 16　

■Adding reticles ……………………………………………………………………………………………………… 17　

Cross ………………………………………………………………………………………………………………… 17　

Grid …………………………………………………………………………………………………………………… 18　

1.6　Microscope camera operation ……………………………………………………………………………………… 19　

■Observation of microscope camera images ………………………………………………………………………… 19　

■Data acquisition and storage ………………………………………………………………………………………… 19　

■Exposure setting …………………………………………………………………………………………………… 20　

■ISO sensitivity setting ……………………………………………………………………………………………… 20　

■White balance setting………………………………………………………………………………………………… 20　

1.7　Operation for changing hardware configuration …………………………………………………………………… 21　

■Zoom microscope body ……………………………………………………………………………………………… 21　

■Objective lens ……………………………………………………………………………………………………… 22　

■Camera adapter ……………………………………………………………………………………………………… 22　

■Coaxial Illumination ………………………………………………………………………………………………… 22　

■Zoom magnification ………………………………………………………………………………………………… 23　

1.8　Functions of the AR display side…………………………………………………………………………………… 24　

■Open ………………………………………………………………………………………………………………… 24　

Contents

■Camera ……………………………………………………………………………………………………………… 24　

Video recording ……………………………………………………………………………………………………… 25　

White balance ………………………………………………………………………………………………………… 25　

■Pen …………………………………………………………………………………………………………………… 26　

■Language setting …………………………………………………………………………………………………… 27　

■Magnification display setting ………………………………………………………………………………………… 28　

■Power ………………………………………………………………………………………………………………… 29　

2　Others …………………………………………………………………………… 30

2.1　System check ……………………………………………………………………………………………………… 30　

■System check ……………………………………………………………………………………………………… 30　

2.2　Setup ………………………………………………………………………………………………………………… 31　

■Selecting a microscope configuration ……………………………………………………………………………… 31　

■AR Display Adjustment ……………………………………………………………………………………………… 32　

■Adjustment of the zoom magnification sensor ……………………………………………………………………… 33　

■Barcode reader ……………………………………………………………………………………………………… 35　

■Connecting external switches ……………………………………………………………………………………… 36　

2.3　Help ………………………………………………………………………………………………………………… 36　

■Help ………………………………………………………………………………………………………………… 36　

2.4　Language setting …………………………………………………………………………………………………… 37　

■Language setting …………………………………………………………………………………………………… 37　

2.5　App startup settings………………………………………………………………………………………………… 37　

■App startup settings ………………………………………………………………………………………………… 37　

2.6　Version information ………………………………………………………………………………………………… 38　

■Version information ………………………………………………………………………………………………… 38　

Windows OS shortcuts

Command Windows OS shortcut keys

Select All Ctrl+A

Copy Ctrl+C

Paste Ctrl+V

1　Operation procedure of the software

1.1　Basic operation of the software

Note

Please refer to the system manual for the operation procedure and limitations of the microscope itself.

The software of this system consists of the following three modes.

Please select the appropriate mode for your intended use.

・Create operating procedures

You can create content files (operating procedures, etc.) for tasks.

・Start the training

You can use the created content files to provide training for workers.

・Start the task

Tasks can be performed according to the created content files.

■Windows OS shortcut keys

■Explanatory note

　Note

Indicates matters and restrictions that, if not observed, may lead to failure of this product or problems.

　Reference

Indicates effective knowledge, information, and other content for use.

　①②③

Indicates that it is a procedure.

　(a)(b)(c)

Indicates that it is a functional description.

1　Operation procedure of the software

①On the Home screen, go to [Create operating

procedures] mode and click [New].

①Monitor side:

On the Home screen, click [Start the task] and then

[Open] to open the content file you want to work

with.

Eyepiece side:

Press [2] on the keyboard to move the mouse cursor

to the eyepiece side.

To move it back to the monitor side, press [1] on the

keyboard.

Right-click to access the menu screen.

From [Home], click [Open] to open the content file

you want to work with.

②After loading the content file is completed, confirm

that an AR image is displayed on the Observation

screen on the eyepiece side, and start the task.

■Create operating procedures

■Start the task

From either the monitor or the eyepiece side, open the content file you want to work with.

1　Operation procedure of the software

Reference

The following is a list of functions available in [Home].

Menu Functions List

Open

You can select and open any content file.

View live pictures, take photos, shoot videos, and save them

Various contents can be used.

Draw lines

You can surround a selection with a free curve and add indicator lines.

Configure the settings

Set the language and magnification display.

Power off

You can close applications, shut down and restart your PC.

Reference

･You cannot overwrite the content file with the edited results such as added free lines.

If you want to edit the content file, you can do so from [Create operating procedures] in the main menu.

･For details on how to operate each menu, please refer to P.24 to 29.

･It can also be used without a monitor when a monitor installation location cannot be secured.

The following settings are required.

　- Enable the auto startup for the software. (For setting instructions, please refer to P.37.)

　- Enable the auto-login setting for the PC.

1　Operation procedure of the software

①On the Home screen, go to [Start the training] mode

and click [Start].

②When you start, three pages of slides will be created.

③

The operator works while looking through the eyepiece.

The instructor checks the operator's work on the

monitor screen.

④If necessary, the instructor can click on an object to

be added from the content menu on the right side of

the screen and add necessary indicator lines, etc. to

the screen for the operator.

　Reference

･For details on the contents menu, please refer to

P.10 to 18.

･You cannot save the information of the added

contents.

･The contents displayed after loading the content

file cannot be edited again.

･You can also use the [Start the training] mode to

create instructions and training contents in

advance for use. In this case, you will need to

open the content file.

■Start the training

1　Operation procedure of the software

①To create a new operating procedure, click [New].

For details on how to create an operating procedure,

please refer to P.10 to 23.

①To load a file, click [Open].

②Select an ARM file and click [Open].

　Reference

･You can also use a barcode reader to read a QR

code saved by ‹Output›.

･For details on the settings for using a barcode

reader, please refer to P.35.

･QR code is a registered trademark of DENSO

WAVE INCORPORATED.

①To save a file, click [Save As] or [Save].

②Select ARM file for the file type.

③Enter a file name and click [Save].

(a) If you want to protect your file, click [Protect File] to

enable file protection.

This function is used to check if the file will be

opened as read-only the next time it is opened. If you

set it as read-only, the content file will be opened in

the [Start the task] mode.

(b) If you save a file with the file protection enabled, a

message will be displayed the next time you open the

file.

No: [Create operating procedures] mode

The operation will be started in each mode.

1.2　File operation

■Creating a new file

■Loading a file

■Saving a file

1　Operation procedure of the software

①Click [Barcode Creation].

②Create a barcode (QR Code) that stores the file path

information described in the [File path to be saved

for barcode] field.

　Reference

When you read the barcode (QR code) with a

barcode reader, it will start reading the content file

of the stored file path.

③

Click [Save as image] to save the barcode (QR Code).

(a) To add a slide, click [Add] and add a new slide after

the selected slide.　

(b) If you want to delete an unnecessary slide, click

[Delete] to delete the selected slide.

　Reference

･The [Delete] key can also be used for deleting

operation.

･You can also use the [Ctrl+A] shortcut to select

all.

･You can select multiple items by holding down the

[Ctrl] key while selecting them.

■Creating barcodes (QR codes)

(a) Select the [Error correction level].

Barcodes (QR codes) have the ability to recover data

even if a part of the code is dirty or damaged. There

are four "Error correction levels": L (7%), M (15%), Q

(25%), and H (30%). Increasing the level improves the

error correction capability, but increases the size of

the code because the amount of data increases. The

level to be selected is determined by overall

consideration of the usage environment, code size,

etc. Select level L or M for environments with less

chance of getting dirty, and select level Q or H for

environments with more chance of getting dirty.

(b) Set the size by directly entering 200-999 (pixels).

1.3　Slide operation

■Adding or deleting slides

1　Operation procedure of the software

　*The currently selected slide will have a blue

frame.

(a) If you want to change the order of the slides, click

[Move Earlier] or [Move Later] to move the selected

slide.

Operating unit Functions of each unit

Mouse wheel Up: Backward Down: Forward

Slide forward/backward button

(Zoom magnification sensor)

Left button: Backward

Right button: Forward

Shortcut key

(Keyboard)

"4" or "PgDn": Slide backward

"6" or "PgUp": Slide forward

　When you turn the zoom handle of the microscope,

the size of the gauge, reticle, etc. stored in the

content file will be zoomed in and out according to

the observation magnification.

Adjust the magnification to suit your training needs

according to your work.

　Reference

･When the zoom magnification is changed, the

drawing on the eyepiece lens and the monitor

screen will be displayed if the handle is at the

zoom click position, and the drawing on the

eyepiece lens and the monitor screen will

disappear if the handle is not at the zoom click

position.

･For details on how to operate other objects,

please refer to P.10 to 18.

■Reordering slides

■Slide forward/backward

The following is how to switch between slide forward and slide backward.

1　Operation procedure of the software

Andere Handbücher für SZX-AR1

Inhaltsverzeichnis

Andere Olympus Mikroskop Handbücher

Olympus

Olympus SZX16 Bedienungsanleitung

Olympus

Olympus BHTP Bedienungsanleitung

Olympus

Olympus IX2-DSU Bedienungsanleitung

Olympus

Olympus BH2 Series Bedienungsanleitung

Olympus

Olympus PM10SP Installationsanleitung

Olympus

Olympus BX51WI Bedienungsanleitung

Olympus

Olympus VMF Bedienungsanleitung

Olympus

Olympus SZ-ADD Bedienungsanleitung

Olympus

Olympus U-MDOB3 Bedienungsanleitung

Olympus

Olympus U-UVF248 Bedienungsanleitung

Olympus

Olympus U-D7RES Bedienungsanleitung

Olympus

Olympus BX63 Bedienungsanleitung

Olympus

Olympus SZ-III Bedienungsanleitung

Olympus

Olympus BX3-SSU Bedienungsanleitung

Olympus

Olympus BX51 Bedienungsanleitung

Olympus

Olympus CKX53 Bedienungsanleitung

Olympus

Olympus BH2 Series Montageanleitung

Olympus

Olympus BHTU-112 Bedienungsanleitung

Olympus

Olympus CX43-RFAB Bedienungsanleitung

Olympus

Olympus MIC-D Bedienungsanleitung

Olympus

Olympus DP22 Bedienungsanleitung

Olympus

Olympus BX51-P Bedienungsanleitung

Olympus

Olympus BX-RFAA Bedienungsanleitung

Olympus

Olympus JM Bedienungsanleitung

Beliebte Mikroskop Handbücher anderer Marken

Thermo Scientific

Thermo Scientific Nicolet iN10 Leitfaden

National

National DC3-163 Bedienungsanleitung

KERN Optics

KERN Optics OPE-1 Bedienungsanleitung

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Bedienungsanleitung

Prior

Prior Lux POL Bedienungsanleitung

Opitec

Opitec Smartscoop 115615 Bedienungsanleitung

KERN

KERN OPO-1 Bedienungsanleitung

Topcon

Topcon SP-1P Bedienungsanleitung

Motic

Motic PA43 Bedienungsanleitung

Leica

Leica DVM5000 Benutzerhandbuch

MshOt

MshOt MZ62 Bedienungsanleitung

KERN Optics

KERN Optics OZR-5 Bedienungsanleitung

VWR

VWR VisiScope 384 Series Bedienungsanleitung

Nikon

Nikon ECLIPSE E200 POL Bedienungsanleitung

Leica

Leica DI C800 Handbuch

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

Leica

Leica FL560 Bedienungsanleitung