ParaBody Leg Press 100 Bedienungsanleitung

100 LEG PRESS

CLASSH

PART# 7155801

REV. B

Version: 100102

Revision: 09/26/01

ASSEMBLY INSTRUCTIONS

WARNING:

Read and follow all directions

for each step to insure proper

assembly of this product.

IMPORTANT NOTES

Please note:

Tools Required forAssembly

* Thank you for purchasing the Parabody 100102 LEG PRESS. Please read these instructions

thoroughly and keep them for future reference. This product must be assembled on a flat,

level surface to assure its proper function.

* 3/4” wrench

* 9/16” wrench

* Ratchet with 3/4” and 9/16” sockets

* Adjustable wrench

* Tape measure

NOTE:BOLTLENGTHISMEASUREDFROMTHE UNDERSIDE OFTHEHEADOFTHEBOLT.

BOLT LENGTH RULER:

We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy

water. Touch-up paint can be purchased from your Parabody customer service representative

at (800) 328-9714.

BoltLengthRuler

0123456

1/2 1/2 1/2 1/2 1/2 1/2

There is a risk assumed by individuals who use this type of equipment. To minimize risk, please

follow these rules:

2. Do not allow minors or children to play on or around this equipment.

1. Inspect equipment daily. Tighten all loose connections and replace worn parts immediately.

Failure to do so may result in serious injury.

3. Exercise with care to avoid injury.

4. If unsure of proper use of equipment, call your local Parabody distributor or call the

Parabody customer service department at (800) 328-9714.

BOLT LENGTH

5. Consult a physician before beginning any exercise program.

PARTS LIST

PART #

7140508

7140802

6806208

7140608

7140708

7140908

7128108

6994721

3102922

KEY

QTY

PART #

3102501

3102802

3102944

3102801

3104901

6416601

7115201

7128201

6140701

DESCRIPTION

3/8” FLAT WASHER

3/8” LOCK NUT

1/2 X 5” BOLT

1/2” LOCK NUT

3/4” FLANGE BEARING

PARAGLIDE (QTY8)

SPRING PIN

3/4 X 4” SHAFT

1” SQ. GLIDE

QTY

DESCRIPTION

FRAME

SEATADJUST

HANDLE

MAINARM

SECONDARM

FOOTPLATE

PULLEYBRACKET

PAD

3/8 X 2-3/4” BOLT

KEY

9-1/2"

FIGURE 1

STEP 1:

• SECURELY assemble the SECOND ARM (5) to the FRAME (1) using one 1/2 X 5” BOLT (12), two 3/4” FLANGE BEARINGS

(14), one 3/4 X 4” SHAFT (17) and one 1/2” LOCK NUT (13). See FIGURE 1.

0123456

1/2 1/2 1/2 1/2 1/2 1/2

12 1/2 X 5”

• SECURELY assemble the MAIN ARM (4) to the FRAME (1) using one 1/2 X 5” BOLT (12), two 3/4” FLANGE BEARINGS (14),

one 3/4 X 4” SHAFT (17) and one 1/2” LOCK NUT (13). See FIGURE 1. (NOTE: Make sure MAIN ARM is orientated cor-

rectly, top hole should be 9-1/2” from the top of arm as shown in FIGURE 1.)

• NOTE: Follow STEP 1 for the assembly of the LEG PRESS to the 220 and 880 Gym Systems. If you have the 777 Gym

System proceed to STEP 2.

• Proceed to to STEP 3.

• SECURELY assemble two 1” SQ. GLIDES (18) to each side of the MAINARM (4) where the MAINARM (4) contacts the FRAME

(1) See FIGURE 1.

For assembly to the the 220 and 880 Gym Systems .

Make sure MAINARM

is orientated correctly

11-1/4"

FIGURE 2

STEP 2:

• SECURELY assemble the SECOND ARM (5) to the FRAME (1) using one 1/2 X 5” BOLT (12), two 3/4” FLANGE BEARINGS

(14), one 3/4 X 4” SHAFT (17) and one 1/2” LOCK NUT (13). See FIGURE 2.

• SECURELY assemble the MAIN ARM (4) to the FRAME (1) using one 1/2 X 5” BOLT (12), two 3/4” FLANGE BEARINGS (14),

one 3/4 X 4” SHAFT (17) and one 1/2” LOCK NUT (13). See FIGURE 2. (NOTE: Make sure MAIN ARM is orientated cor-

rectly, top hole should be 11-1/4” from the top of arm as shown in FIGURE 2.)

• NOTE: Follow STEP 2 for the assembly of the LEG PRESS to the 777 Gym System. If you have the 220 or 880 Gym Systems

proceed to STEP 3.

• Proceed to to STEP 3.

• SECURELY assemble two 1” SQ. GLIDES (18) to each side of the MAINARM (4) where the MAINARM (4) contacts the FRAME

(1) See FIGURE 2.

12 1/2 X 5”

For assembly to the the 777 Gym System .

Make sure MAINARM

is orientated correctly

FIGURE 3

STEP 3:

• Insert two 3/4” FLANGE BEARINGS (14) and one 3/4 X 4” SHAFT (17) into the SECONDARM (5) as shown in FIGURE 3.

• Insert two 3/4” FLANGE BEARINGS (14) and one 3/4 X 4” SHAFT (17) into the MAINARM (4) as shown in FIGURE 3.

0123456

1/2 1/2 1/2 1/2 1/2 1/2

STEP4:

FIGURE 4

• SECURELY assemble the FOOTPLATE (6) to the SECONDARM (5) and the MAINARM (4) using two 1/2 X 5” BOLTS (12) and

two 1/2” LOCK NUTS (13). See FIGURE 4.

12 1/2 X 5”

STEP5:

FIGURE 5

3/8 X 2-3/4” 9

• SECURELY assemble the HANDLE (3) to the FRAME (1) using two 3/8 X 2-3/4” BOLTS (9), four 3/8” FLAT WASHERS (10)

and two 3/8” LOCK NUTS (11) as shown in FIGURE 5.

0123456

1/2 1/2 1/2 1/2 1/2 1/2

STEP6:

FIGURE 6

• CAREFULLEY slide the SEAT ADJUST (2) into the FRAME (1) and engage the SPRING PIN into one of the adjustment holes.

See FIGURE 6.

• Attach eight PARAGLIDE STRIPS (15) to the inside of the tube on the FRAME (1) using the following steps:

• Thoroughly clean all surfaces where the PARAGLIDE STRIPS (15) are to be attached.

• Remove the PARAGLIDE STRIPS (15) from the paper backing and firmly apply them to all shown surfaces.

• SECURELY assemble one SPRING PIN (16) to the spring pin barrel on the FRAME (1) as shown in FIGURE 6.

STEP7:

FIGURE 7

• SECURELY assemble one PAD (8) to the SEATADJUST (2) using two 3/8 X 2-3/4” BOLTS (9) and two 3/8” FLAT WASHERS

(10) as shown in FIGURE 7.

9 3/8 X 2-3/4”

0123456

1/2 1/2 1/2 1/2 1/2 1/2

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ParaBody Fitnessgeräte Handbücher

ParaBody

ParaBody 700 Montageanleitung

ParaBody

ParaBody 826 Bedienungsanleitung

ParaBody

ParaBody 813 Bedienungsanleitung

ParaBody

ParaBody 802101 Montageanleitung

ParaBody

ParaBody Serious Steel 805106 Bedienungsanleitung

ParaBody

ParaBody Leg Press 100101 Bedienungsanleitung

ParaBody

ParaBody 877 Montageanleitung

ParaBody

ParaBody Leg Press 5 Bedienungsanleitung

ParaBody

ParaBody 893102 Montageanleitung

ParaBody

ParaBody 842 Bedienungsanleitung

ParaBody

ParaBody 221 Bedienungsanleitung

ParaBody

ParaBody 885 Bedienungsanleitung

ParaBody

ParaBody 778 Bedienungsanleitung

ParaBody

ParaBody 811101 Montageanleitung

ParaBody

ParaBody 877102 Bedienungsanleitung

ParaBody

ParaBody Leg Press Factor 625 Installationsanleitung

ParaBody

ParaBody 8661O2 Bedienungsanleitung

ParaBody

ParaBody 886101 Bedienungsanleitung

ParaBody

ParaBody GS6-LP5A-101 Bedienungsanleitung

ParaBody

ParaBody 835102 Bedienungsanleitung

ParaBody

ParaBody 661101 Bedienungsanleitung

ParaBody

ParaBody 914101 Bedienungsanleitung

ParaBody

ParaBody 893104 Bedienungsanleitung

ParaBody

ParaBody 889 Bedienungsanleitung

Beliebte Fitnessgeräte Handbücher anderer Marken

NSD

NSD PB-188P Bedienungsanleitung

Performance

Performance HyperVibe Bedienungsanleitung

Scalamobil

Scalamobil S27 Bedienungsanleitung

Precor

Precor Experience Series Bedienungsanleitung

FYTTER

FYTTER RedMIUM BENCH BE-T6R Bedienungsanleitung

Taurus

Taurus TF-RK1312 Bedienungsanleitung

Nustep

Nustep T5 Bedienungsanleitung

Precor

Precor CW-507 Bedienungsanleitung

Movement

Movement BICEPS Idea Bedienungsanleitung

Kegel8

Kegel8 V For Men Bedienungsanleitung

BLK BOX

BLK BOX 21-0122-0B Bedienungsanleitung

Stamina

Stamina aeropilates premier 299 Bedienungsanleitung

SPORTSTECH

SPORTSTECH PBX300 Bedienungsanleitung

Weslo

Weslo Gym 650 Bedienungsanleitung

Rebel

Rebel ACTIVE RBA-1011 Bedienungsanleitung

4iiii

4iiii FLiiiight Bedienungsanleitung

Image

Image 540 Bedienungsanleitung

SteelFlex

SteelFlex PLHP Kurzanleitung