ParaBody 829 Bedienungsanleitung

1CLASSH

PART # 7302401

REV.A Revision: 06/13/02

USER’S GUIDE

WARNING:

Read and follow all directions

for each step to insure proper

assembly of this product.

829 LEG CURL/EXTENSION

Version: 829108

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF

EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES!

1. Before using, read all the warnings and instructions

on the use of this machine. Use only for intended

exercise. DO NOT modify the machine.

2. Obtain a medical exam before beginning any

exercise program.

3. Keep body and clothing free of all moving objects.

4. Inspect the machine before use. DO NOT use it if it

appears damaged. DO NOT attempt to fix a broken or

ammed machine. Notify your authorized ParaBody

dealer before use and have repairs made by an

authorized service technician.

5. Be certain that weight pin is completely inserted.

Use only the pin provided by the manufacturer. If

unsure, call your authorized ParaBody dealer.

6. Never pin the weights or prop plate into an elevated

position. DO NOT use the machine if found in this

condition. DO NOT attempt to fix. Notify your

authorized ParaBody dealer.

7. Inspect cables and their connections before using

machine. Pay particular attention to the cable ends.

DO NOT attempt to fix. Notify your authorized

ParaBody dealer before use and have repairs made by

an authorized service technician.

8. Make sure all spring loaded pull pins are fully

engaged in the adjustment position and fully tighten

thumbscrew before use.

9. Children must not be allowed near this machine.

Supervise teenagers.

IMPORTANT SAFETY INFORMATION

TABLE OF CONTENTS

Safety Statement.............2

General Notes..................3

Tools Required................3

Gym Layout.....................4

NOTE: In a continual effort to improve our products, specifications are subject to change

ParaBody is a trademark of Brunswick Corporation

www.parabody.com

Parts list..........................5

Assembly Instructions.....5-8

General Maintenance.......9

Warranty Statement..........10

Product Services..............11

Insert-Registration Card

IMPORTANT NOTES

Please note:

Tools Required forAssembly

* Thank you for purchasing the ParaBody 829 LEG CURL/EXTENSION. Please read these

instructions thoroughly and keep them for future reference. This product must be assembled

on a flat, level surface to assure its proper function.

NOTE:BOLTLENGTHIS MEASURED FROMTHEUNDERSIDEOFTHEHEADOFTHEBOLT.

BOLT LENGTH RULER:

* This product must be assembled on a flat, level surface to assure its proper function. DO NOT

securely tighten any frame connections until the entire frame has been assembled, unless

otherwise stated.

Bolt Length Ruler

0123456

1/2 1/2 1/2 1/2 1/2 1/2

BOLT LENGTH

* 3/4” wrench

* 9/16” wrench

* Ratchet with 3/4” and 9/16” sockets

* Adjustable wrench

* Tape measure

1 Square = 1’ X 1’

1’ 2’ 3’ 4’ 5’

1’

5’

4’

3’

2’

6’

PARTS LIST

DESCRIPTION

FRONTSUPPORTTUBE

BACK PADADJUSTTUBE

BACK PAD SUPPORT TUBE

1-3/4 SQ X 5" TUBE

1-3/4 SQ X 13-1/2" TUBE

LEG CURL/EXTENSION

BACKPADASSY

SEATPADASSY

LEGEXT HANDLE RHT

LEGEXTHANDLELFT

LEG FRAME

REARBASELEG

3/4 X 16" TUBE

3/4 X 17" TUBE

4 X 7" ROLLER PAD

1/8 X 2 X 8" PLATE

3/8” DIA SPRING PIN

1/2" DIA SPRING PIN

3/8 X 1" BOLT

KEY

PART #

LEA3235212

LEA3235216

LEA3235316

LEA3235428

LEA3114403

LEA3114702

LEA3235501

LEA3235502

LEA6405201

LEA6692601

LEA3102416

LEA6406401

LEA3104301

LEA6416601

LEA6020601

LEA3105401

LEA3103101

LEA7234801

LEA3108901

DESCRIPTION

3/8 X 3" BOLT

3/8 X 4" BOLT

1/2 X 4" BOLT

1/2 X 7" BOLT

3/8"FLATWASHER

3/8" NYLOCK NUT

1/2" LOW HT. NYLOCK NUT

3/8" LOW HT. NYLOCK NUT

2" SQ END CAP

3 X 2" END CAP

2 X 1" END CAP

HINGETAB

3/4" SQ RUBBER BUMPER

1-1/2 X 3/4" GLIDE (QTY 8)

1/2"FLANGEBEARING

STARLOCK COLLAR

1-1/4 X 5" GRIP

2” SQ COVER END CAP

2” O.D. X 3/4” PLASTIC WASHER

QTY

LEG CURLLEG EXTENSION

PART #

LEA6259109

LEA6625410

LEA6625510

LEA6216710

LEA6668210

LEA6662010

LEA6661221

LEA6661621

LEA6662209

LEA6662309

LEA6668509

LEA6668809

LEA6125101

LEA6549301

LEA6194601

LEA6628310

LEA6412001

LEA6466901

LEA3235204

KEY

QTY

Insert four COVER END CAPS(37) into

the ends of REAR BASE LEG (12) and

FRONTBASESUPPORT(1).SeeFIGURE

STEP 1:

Securelyassemble REAR BASE LEG (12)

to LEG FRAME (11) using two 3/8 X 3”

BOLTS (20), four 3/8” FLAT WASHERS

(24), and two 3/8” NYLOCK NUTS (25).

See FIGURE 2.

STEP 3:

Securely assemble FRONT BASE SUP-

PORT (1) to LEG FRAME (11) using two

3/8 X 3” BOLTS (20), four 3/8” FLAT

WASHERS (24), and two 3/8” NYLOCK

NUTS (25). See FIGURE 3.

STEP 4:

Slide two 1-1/4 X 5" GRIPS (36) over

RIGHT LEG EXT HANDLE (9) & LEFT

LEGEXTHANDLE (10). See FIGURE 4.

STEP 5:

FIGURE 1

37 12

2425

FIGURE 2

3/8 X 3” 20

FIGURE 3

FIGURE 4

Slidetwo 1-1/4 x 5” GRIPS (36) over tubes

on REAR BASE LEG (12). See FIGURE

STEP 2:

20 3/8 X 3”

SecurelyassembleRIGHT(9)&LEFT(10)

LEGEXTHANDLEStoLEGFRAME(11)

usingtwo 3/8 X 4” BOLTS (21), four 3/8”

FLATWASHERS(24),andtwo3/8”LOW

HEIGHTNYLOCKNUTS(27).SeeFIG-

URE5.

STEP 6:

FIGURE 5

27 LOW HEIGHT

Insert two 3 X 2” END CAPS (29) into

the leg frame as shown in FIGURE 5.

STEP 7:

FIGURE 6

FIGURE 7

Securely assemble one 1/2” SPRING PIN AS-

SEMBLY(18) into the spring pin barrel on the

LEG FRAME (11) as shown in FIGURE 6.

STEP 8:

Insert four 2 X 1” END CAPS (30) into the ends

of the BACK PAD ADJUST TUBE (2) & BACK

PAD SUPPORT TUBE (3). See FIGURE 7.

STEP 9:

21 3/8 X 4”

0123456

1/2 1/2 1/2 1/2 1/2 1/2

Securely assemble BACK PAD ADJUST

TUBE (2) & BACK PAD SUPPORT TUBE

(3) to LEG FRAME (11) using one 1/2 X 7”

BOLT (23) and one 1/2” LOW HEIGHT

NYLOCK NUT (26). (NOTE: SECURELY

TIGHTENBOLTTHENBACK NUT OFF

1/4TURNTOALLOWTHETWOPARTS

TO ROTATE FREELY.) See FIGURE 8.

STEP 10:

Securely attach the BACK PAD (7)

to the BACK PAD TUBES (2 & 3)

using four 3/8 X 3” BOLTS (20)

and four 3/8” FLAT WASHERS

(24). See FIGURE 9.

STEP 11:

FIGURE 8

FIGURE 9

7 20 3/8 X 3”

Securely fasten 2 X 8” PLATE (16) to bottom of SEAT

PAD (8) using two 3/8 X 1” BOLTS (19) and two 3/8”

FLAT WASHERS (24). See FIGURE 10.

STEP 12:

FIGURE 10

23 1/2 X 7”

19 3/8 X 1”

Slide two HINGE TABS (31) over posts on

LEG FRAME (11). See FIGURE 11.

STEP 13:

FIGURE 12

FIGURE 13

Securely attach the SEAT PAD (8) to the

HINGE TABS (31) using two 3/8 X 1”

BOLTS(19)andtwo 3/8” FLAT WASH-

ERS (24). See FIGURE 12.

STEP 14:

19 3/8 X 1”

Attach two ROLLER PADS (15) to the

LEG FRAME (11) using one 17” ROLLER

PAD SHAFT (14) and two STARLOCK

COLLARS (35). See FIGURE 13.

STEP 15:

FIGURE 11

0123456

1/2 1/2 1/2 1/2 1/2 1/2

FIGURE 16

Securely assemble two 3/8” SPRING PIN AS-

SEMBLIES (17) into the spring pin barrels on

the LEG CURL/EXTENSION (6) as shown in

FIGURE 15.

FIGURE 15

FIGURE 14

STEP 17:

4 5

Insert 5” & 13-1/2” ROLLER PAD

ADJUSTERS (4 & 5) in the ends of the

LEG CURL/EXTENSION (6). Pull back

on SPRING PINS until ROLLER PAD

ADJUSTERS (4 & 5) lock in place. See

FIGURE 16.

STEP 18:

Attach eight 1-1/2” X 3/4” GLIDES (33) to 5”

ROLLER PAD ADJUSTER (4) and attach eight

1-1/2” X 3/4” GLIDES (33) to 13-1/2” ROLLER

PAD ADJUSTER (5) as shown in FIGURE 14.

STEP 16:

Insertthree2”SQUAREEND CAPS (28)

into the ends of the LEG CURL/EXTEN-

SION (6). See FIGURE 16.

STEP 19:

Andere Handbücher für 829

Inhaltsverzeichnis

Andere ParaBody Fitnessgeräte Handbücher

ParaBody

ParaBody 476 Montageanleitung

ParaBody

ParaBody 835101 Montageanleitung

ParaBody

ParaBody 874 Montageanleitung

ParaBody

ParaBody 914101 Bedienungsanleitung

ParaBody

ParaBody 832101 Bedienungsanleitung

ParaBody

ParaBody 888 Bedienungsanleitung

ParaBody

ParaBody 887 Bedienungsanleitung

ParaBody

ParaBody Serious Steel 877102 Bedienungsanleitung

ParaBody

ParaBody 883 Bedienungsanleitung

ParaBody

ParaBody 821104 Bedienungsanleitung

ParaBody

ParaBody 810 Montageanleitung

ParaBody

ParaBody 813102 Bedienungsanleitung

ParaBody

ParaBody 875 Montageanleitung

ParaBody

ParaBody Leg Press Factor 625 Installationsanleitung

ParaBody

ParaBody 830 Bedienungsanleitung

ParaBody

ParaBody 867101 Montageanleitung

ParaBody

ParaBody Serious Steel 827104 Bedienungsanleitung

ParaBody

ParaBody 827103 Bedienungsanleitung

ParaBody

ParaBody 893102 Montageanleitung

ParaBody

ParaBody 880 Bedienungsanleitung

ParaBody

ParaBody Leg Hold Down 823101 Bedienungsanleitung

ParaBody

ParaBody 849 Bedienungsanleitung

ParaBody

ParaBody 832102 Bedienungsanleitung

ParaBody

ParaBody 848101 Bedienungsanleitung

Beliebte Fitnessgeräte Handbücher anderer Marken

NSD

NSD PB-188P Bedienungsanleitung

Performance

Performance HyperVibe Bedienungsanleitung

Scalamobil

Scalamobil S27 Bedienungsanleitung

Precor

Precor Experience Series Bedienungsanleitung

FYTTER

FYTTER RedMIUM BENCH BE-T6R Bedienungsanleitung

Taurus

Taurus TF-RK1312 Bedienungsanleitung

Nustep

Nustep T5 Bedienungsanleitung

Precor

Precor CW-507 Bedienungsanleitung

Movement

Movement BICEPS Idea Bedienungsanleitung

Kegel8

Kegel8 V For Men Bedienungsanleitung

BLK BOX

BLK BOX 21-0122-0B Bedienungsanleitung

Stamina

Stamina aeropilates premier 299 Bedienungsanleitung

SPORTSTECH

SPORTSTECH PBX300 Bedienungsanleitung

Weslo

Weslo Gym 650 Bedienungsanleitung

Rebel

Rebel ACTIVE RBA-1011 Bedienungsanleitung

4iiii

4iiii FLiiiight Bedienungsanleitung

Image

Image 540 Bedienungsanleitung

SteelFlex

SteelFlex PLHP Kurzanleitung