ParaBody 848101 Bedienungsanleitung

848101 LAT OPTION

Part # 6826701 Revision: 5/26/99

ASSEMBLY INSTRUCTIONS

Please note:

Tools Required forAssembly

* Thank you for purchasing the Parabody 848101 LAT OPTION. Please read these instructions

thoroughly and keep them for future reference. This product must be assembled on a flat, level

surface to assure its proper function.

* 3/4” wrench

* 9/16” wrench

* Ratchet with 3/4” and 9/16” sockets

* Adjustable wrench

* Tape measure

NOTE:BOLTLENGTHISMEASURED FROMTHEUNDERSIDE OFTHEHEAD OFTHEBOLT.

BOLT LENGTH RULER:

We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy

water. Touch-up paint can be purchased from your Parabody customer service representative

at (800) 328-9714.

BoltLengthRuler

0123456

1/2 1/2 1/2 1/2 1/2 1/2

WELCOMETOTHE WORLDOF Serious steel!

There is a risk assumed by individuals who use this type of equipment. To minimize risk, please

follow these rules:

2. Do not allow minors or children to play on or around this equipment.

1. Inspect equipment daily. Tighten all loose connections and replace worn parts immediately.

Failure to do so may result in serious injury.

3. Exercise with care to avoid injury.

4. If unsure of proper use of equipment, call your local Parabody distributor or call the

Parabody customer service department at (800) 328-9714.

BOLT LENGTH

5. Consult a physician before beginning any exercise program.

IMPORTANT NOTES

PARTS LIST

PART #

6824303

6823703

6825403

6824103

6825502

6275302

6274402

6542402

6824801

3103102

3116201

6177001

6405201

6467001

6692601

6825101

KEY

QTY

PART #

3116001

6140701

3102501

3102802

3102502

3102801

3102933

3102903

3102922

3102935

3102910

3103801

3108102

6122703

6480301

6127701

DESCRIPTION

1-1/4”RUBBERBUMPER

1X1”GLIDE

3/8”WASHER

3/8”LOCKNUT

1/2”WASHER

1/2”LOCKNUT

3/8X2”BOLT

3/8X2-1/2”BOLT

3/8X2-3/4”BOLT

3/8X4-1/2”BOLT

1/2X3”BOLT

5/16”SNAPLINK

1/4”QUICKDISCONNECTLINK

3/8X3/8” SPACER

3/8”FLANGESPACER

3/8X1” SPACER

QTY

DESCRIPTION

BASE

UPRIGHT

STAND

CROSSBRACE

CARRIAGE

LATBAR

LOWROWBAR

3/16X1-3/4 X5-1/4” PLATE

CABLE

1X8”GRIP

3-1/2”PULLEY

2-1/2X5-1/2”NON-SKIDSTRIP

2”SQ.ENDCAP

2”SQ COVERCAP

3X2” END CAP

17-1/2”FOAMSTRIP

KEY

FIGURE 1

STEP 1:

• SECURELYassemblethe one3/8 X2-3/4” BOLT(25),two 3/8”WASHERS(19), andone3/8” LOCKNUT(20)to theSTAND (3)as

shownin FIGURE 1.

0123456

1/2 1/2 1/2 1/2 1/2 1/2

• Assemble two 2” SQ. COVER CAPS (14) onto the ends of the STAND (3) as shown in FIGURE 1.

• Insert two 3 X 2” END CAP (15) into the ends of the BASE (1) as shown in FIGURE 2.

FIGURE 2

STEP2:

3/8X 2-3/4” 25 19

• Assemble one 2” SQ. END CAP(13) into the end of the STAND (3) as shown in FIGURE 1.

FIGURE 4

STEP3:

• Assemble one 17-1/2” FOAM STRIP (16) to the underside of the CROSS BRACE (4) as shown in FIGURE 3.

• Assembletwo 2-1/2X 5-1/2”NON-SKIDSTRIPS (12)tothe CROSSBRACE(4) asshown inFIGURE3.

FIGURE 3

STEP4:

• SECURELYattach one 1-1/4”SQ. RUBBERBUMPER (17)to theCARRIAGE (5)as shownin FIGURE4.

• Insert two 2” SQ. END CAPS (13) into the ends of the CROSS BRACE (4) as shown in FIGURE 3.

• Attach eight 1 X 1” GLIDES (18) to the ends the CARRIAGE (5) as shown in FIGURE 4 using the following steps:

• Thoroughly clean all surfaces where the 1 X 1” GLIDES (18) are to be attached.

• Remove the 1 X 1” GLIDES (18) from the paper backing and firmly apply them to all shown surfaces.

STEP5:

FIGURE 5

0123456

1/2 1/2 1/2 1/2 1/2 1/2

• Slidethe CARRIAGE(5) over theUPRIGHT (2)as

shownin FIGURE 5.

• Assemble the STAND (3) to the UPRIGHT (2) as

shownin FIGURE 5.

• Assemble the BASE (1) to the UPRIGHT (2) as

shownin FIGURE 5.

STEP6:

FIGURE 6

• SECURELYassemble the BASE (1) to the UPRIGHT (2) using one 1/2 X 3” BOLT(27), two 1/2” WASHERS (21) (slide front washer

INSIDEoftube),and one 1/2”LOCKNUT (22). SeeFIGURE6.

• Insert one 3 X 2” END CAP (15) and one 2” SQ. END CAP (13) into the ends of the UPRIGHT (2) as shown in FIGURE 6.

• SECURELYassemble the CROSSBRACE (4)to the UPRIGHT(2)usingtwo 3/8X 2-3/4” BOLTS(25), two3/8”WASHERS (19),and two

3/8”LOCKNUTS(20).SeeFIGURE6. 7

27 1/2 X 3”

3/8 X2-3/4” 25

STEP7:

FIGURE 7

0123456

1/2 1/2 1/2 1/2 1/2 1/2

• Route the CABLE (9) through the UPRIGHT (2) as shown in FIGURE 7.

• SECURELYassemblethree3-1/2”PULLEYS(11)into the slotsoftheUPRIGHT(2) using three 3/8X2-3/4”BOLTS (25), six 3/8”FLANGE

SPACERS(31), and three3/8”LOCK NUTS(20)as showninFIGURE 7.(NOTE:Makesurethecable isroutedoverallthepulleys.)

3/8 X2-3/4” 25

STEP8:

FIGURE 8

23 3/8 X 2”

• Place one 3-1/2” PULLEY (11) into the loop of the CABLE (9) below the second and third PULLEY of the UPRIGHT (2) as shown in

FIGURE8.

• LOOSELYassemble two3/16X 1-3/4X 5-1/4”PLATES(8) toeach sideofthe 3-1/2”PULLEY(11)usingone 3/8X 2”BOLT(23),

two3/8”WASHERS (19),andone 3/8” LOCKNUT(20). SeeFIGURE8.

• Attachthe CABLE(9)from theUPRIGHT (2)to the CARRIAGE(5)using one1/4”QUICK LINK(29)as showninFIGURE 8.(IMPOR-

TANT!SecurelytightenQUICKLINK.)

SECURELY

TIGHTEN!

STEP9:

FIGURE 9

23 3/8 X 2”

• Route the end of the second CABLE (9) through the slot on the UPRIGHT (2) then SECURELYassemble one 3-1/2” PULLEY(11) to

theUPRIGHT(2) using two3/8X2-1/2”BOLTS(24), two3/8X3/8”SPACERS(30),four 3/8”WASHERS(19), and two 3/8”LOCKNUTS

(20).(NOTE:TheCABLE(9)shouldberoutedbetweenthepulleyandtheretainingboltasshowninFIGURE9.)

• Loopthe CABLE(9)around one3-1/2” PULLEY (11)as showninFIGURE 9.

• LOOSELYassemblethe3-1/2”PULLEY(11)tothe3/16 X 1-3/4X5-1/4”PLATES(8)using one 3/8X2” BOLT(23),two3/8”WASHERS

(19),andone 3/8” LOCKNUT (20).See FIGURE9.

• SECURELYtighten the two3/8X 2”BOLTS(23) ofthe 3/16X1-3/4 X5-1/4”PLATES(8).

24 3/8 X 2-1/2”

0123456

1/2 1/2 1/2 1/2 1/2 1/2

Inhaltsverzeichnis

Andere ParaBody Fitnessgeräte Handbücher

ParaBody

ParaBody Hip Sled System Bedienungsanleitung

ParaBody

ParaBody 886101 Bedienungsanleitung

ParaBody

ParaBody 821 Bedienungsanleitung

ParaBody

ParaBody 848 Bedienungsanleitung

ParaBody

ParaBody 503 Montageanleitung

ParaBody

ParaBody 843 Bedienungsanleitung

ParaBody

ParaBody 887101 Bedienungsanleitung

ParaBody

ParaBody 893102 Montageanleitung

ParaBody

ParaBody 868 Montageanleitung

ParaBody

ParaBody 827101 Montageanleitung

ParaBody

ParaBody 855103 Bedienungsanleitung

ParaBody

ParaBody 810 Montageanleitung

ParaBody

ParaBody 813 Bedienungsanleitung

ParaBody

ParaBody 835101 Montageanleitung

ParaBody

ParaBody 661101 Bedienungsanleitung

ParaBody

ParaBody 866101 Montageanleitung

ParaBody

ParaBody 832102 Bedienungsanleitung

ParaBody

ParaBody 8661O2 Bedienungsanleitung

ParaBody

ParaBody 474 Bedienungsanleitung

ParaBody

ParaBody 704101 Montageanleitung

ParaBody

ParaBody 822 Bedienungsanleitung

ParaBody

ParaBody 778 Bedienungsanleitung

ParaBody

ParaBody 221 Bedienungsanleitung

ParaBody

ParaBody Serious Steel 877102 Bedienungsanleitung

Beliebte Fitnessgeräte Handbücher anderer Marken

NSD

NSD PB-188P Bedienungsanleitung

Performance

Performance HyperVibe Bedienungsanleitung

Scalamobil

Scalamobil S27 Bedienungsanleitung

Precor

Precor Experience Series Bedienungsanleitung

FYTTER

FYTTER RedMIUM BENCH BE-T6R Bedienungsanleitung

Taurus

Taurus TF-RK1312 Bedienungsanleitung

Nustep

Nustep T5 Bedienungsanleitung

Precor

Precor CW-507 Bedienungsanleitung

Movement

Movement BICEPS Idea Bedienungsanleitung

Kegel8

Kegel8 V For Men Bedienungsanleitung

BLK BOX

BLK BOX 21-0122-0B Bedienungsanleitung

Stamina

Stamina aeropilates premier 299 Bedienungsanleitung

SPORTSTECH

SPORTSTECH PBX300 Bedienungsanleitung

Weslo

Weslo Gym 650 Bedienungsanleitung

Rebel

Rebel ACTIVE RBA-1011 Bedienungsanleitung

4iiii

4iiii FLiiiight Bedienungsanleitung

Image

Image 540 Bedienungsanleitung

SteelFlex

SteelFlex PLHP Kurzanleitung