ParaBody 848 Bedienungsanleitung

848 LAT OPTION

CLASSH

PART # 7080301

REV. B Revision: 07/10/01

USER’S GUIDE

WARNING:

Read and follow all directions

for each step to insure proper

assembly of this product.

Version: 848107

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF

EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES!

1. Before using, read all the warnings and instructions

on the use of this machine. Use only for intended

exercise. DO NOT modify the machine.

2. Obtain a medical exam before beginning any

exercise program.

3. Keep body and clothing free of all moving objects.

4. Inspect the machine before use. DO NOT use it if it

appears damaged. DO NOT attempt to fix a broken or

ammed machine. Notify your authorized ParaBody

dealer before use and have repairs made by an

authorized service technician.

5. Be certain that weight pin is completely inserted.

Use only the pin provided by the manufacturer. If

unsure, call your authorized ParaBody dealer.

6. Never pin the weights or prop plate into an elevated

position. DO NOT use the machine if found in this

condition. DO NOT attempt to fix. Notify your

authorized ParaBody dealer.

7. Inspect cables and their connections before using

machine. Pay particular attention to the cable ends.

DO NOT attempt to fix. Notify your authorized

ParaBody dealer before use and have repairs made by

an authorized service technician.

8. Make sure all spring loaded pull pins are fully

engaged in the adjustment position and fully tighten

thumbscrew before use.

9. Children must not be allowed near this machine.

Supervise teenagers.

IMPORTANT SAFETY INFORMATION

TABLE OF CONTENTS

Safety Statement.............2

General Notes..................3

Tools Required................3

NOTE: In a continual effort to improve our products, specifications are subject to change

ParaBody is a trademark of Brunswick Corporation

www.parabody.com

Parts list..........................4

Assembly Instructions.....4-15

General Maintenance.......16

Warranty Statement..........17

Product Services..............18

Insert-Registration Card

IMPORTANT NOTES

Please note:

Tools Required forAssembly

* Thank you for purchasing the ParaBody 848 LAT OPTION. Please read these

instructions thoroughly and keep them for future reference. This product must be assembled

on a flat, level surface to assure its proper function.

* Rubber mallet or hammer

* 3/4” wrench

* 9/16” wrench

* Ratchet with 3/4” and 9/16” sockets

* Adjustable wrench

* Tape measure

NOTE:BOLTLENGTH IS MEASURED FROMTHEUNDERSIDE OFTHEHEADOFTHEBOLT.

BOLT LENGTH RULER:

* This product must be assembled on a flat, level surface to assure its proper function. DO NOT

securely tighten any frame connections until the entire frame has been assembled, unless

otherwise stated.

Bolt Length Ruler

0123456

1/2 1/2 1/2 1/2 1/2 1/2

BOLT LENGTH

0123456

1/2 1/2 1/2 1/2 1/2 1/2

PARTS LIST

PART #

6826608

6826908

6825408

6827208

6825502

6275302

6274402

6542402

6824801

3103102

3116201

6177001

6405201

6467001

6692601

6825101

KEY

QTY

PART #

3116001

6140701

3102501

3102802

3102502

3102801

3102933

3102903

3102922

3102935

3102910

3103801

3108102

6122703

6480301

6122701

DESCRIPTION

1-1/4” RUBBER BUMPER

1 X 1” GLIDE

3/8” WASHER

3/8” LOCK NUT

1/2” WASHER

1/2” LOCK NUT

3/8 X 2” BOLT

3/8 X 2-1/2” BOLT

3/8 X 2-3/4” BOLT

3/8 X 4-1/2” BOLT

1/2 X 3” BOLT

5/16” SNAP LINK

1/4” QUICK DISCONNECT LINK

3/8 X 3/8” SPACER

3/8” FLANGE SPACER

3/8 X 1” SPACER

QTY

DESCRIPTION

BASE

UPRIGHT

STAND

CROSSBRACE

CARRIAGE

LATBAR

LOW ROW BAR

3/16 X 1-3/4 X 5-1/4” PLATE

CABLE

1 X 8” GRIP

3-1/2” PULLEY

2-1/2 X 5-1/2” NON-SKID STRIP

2” SQ. END CAP

2” SQ COVER CAP

3 X 2” END CAP

17-1/2” FOAM STRIP

KEY

FIGURE 1

STEP 1:

• SECURELY assemble the one 3/8 X 2-3/4” BOLT(25),two3/8”WASHERS (19), and one 3/8” LOCK NUT(20) to the STAND(3)as

shownin FIGURE 1.

• Assemble two 2” SQ. COVER CAPS (14) onto the ends of the STAND (3) as shown in FIGURE 1.

• Insert two 3 X 2” END CAP (15) into the ends of the BASE (1) as shown in FIGURE 2.

FIGURE 2

STEP2:

3/8X2-3/4” 25 19

• Assemble one 2” SQ. END CAP(13) into the end of the STAND (3) as shown in FIGURE 1.

FIGURE 4

STEP3:

• Assemble one 17-1/2” FOAM STRIP (16) to the underside of the CROSS BRACE (4) as shown in FIGURE 3.

• Assembletwo2-1/2 X 5-1/2” NON-SKID STRIPS (12)totheCROSS BRACE (4) as shown inFIGURE3.

FIGURE 3

STEP4:

• SECURELYattachone1-1/4” SQ.RUBBERBUMPER (17)tothe CARRIAGE (5)asshown inFIGURE4.

• Insert two 2” SQ. END CAPS (13) into the ends of the CROSS BRACE (4) as shown in FIGURE 3.

• Attach eight 1 X 1” GLIDES (18) to the ends the CARRIAGE (5) as shown in FIGURE 4 using the following steps:

• Thoroughly clean all surfaces where the 1 X 1” GLIDES (18) are to be attached.

• Remove the 1 X 1” GLIDES (18) from the paper backing and firmly apply them to all shown surfaces.

0123456

1/2 1/2 1/2 1/2 1/2 1/2

STEP5:

FIGURE 5

• SlidetheCARRIAGE(5)overthe UPRIGHT (2) as

shownin FIGURE 5.

• Assemble the STAND (3) to the UPRIGHT (2) as

shownin FIGURE 5.

• Assemble the BASE (1) to the UPRIGHT (2) as

shownin FIGURE 5.

STEP6:

FIGURE 6

• SECURELYassemble the BASE (1) to the UPRIGHT (2) using one 1/2 X 3” BOLT (27), two 1/2”WASHERS (21) (slide frontwasher

INSIDEoftube),andone1/2”LOCKNUT(22). SeeFIGURE 6.

• Insert one 3 X 2” END CAP (15) and one 2” SQ. END CAP (13) into the ends of the UPRIGHT (2) as shown in FIGURE 6.

• SECURELYassembletheCROSS BRACE(4) to theUPRIGHT(2)using two3/8X 2-3/4”BOLTS(25),two 3/8”WASHERS(19),and two

3/8”LOCKNUTS (20).SeeFIGURE6. 8

27 1/2 X 3”

3/8X 2-3/4” 25

STEP7:

FIGURE 7

• Route the CABLE (9) through the UPRIGHT (2) as shown in FIGURE 7.

• SECURELYassemblethree3-1/2” PULLEYS(11)intotheslotsoftheUPRIGHT(2)using three3/8 X2-3/4”BOLTS(25),six3/8”FLANGE

SPACERS(31),andthree 3/8” LOCK NUTS (20) asshowninFIGURE 7.(NOTE:Makesurethecableisroutedoverallthepulleys.)

3/8X 2-3/4” 25

STEP8:

FIGURE 8

23 3/8 X 2”

• Place one 3-1/2” PULLEY (11) into the loop of the CABLE (9) below the second and third PULLEY of the UPRIGHT (2) as shown in

FIGURE8.

• LOOSELY assembletwo 3/16 X 1-3/4 X 5-1/4” PLATES(8)toeachsideofthe3-1/2”PULLEY(11) using one 3/8 X 2” BOLT(23),

two3/8”WASHERS(19),andone 3/8” LOCKNUT(20).SeeFIGURE 8.

• AttachtheCABLE (9) from the UPRIGHT (2) totheCARRIAGE(5) using one 1/4” QUICK LINK (29)asshownin FIGURE 8. (IMPOR-

TANT!SecurelytightenQUICKLINK.)

SECURELY

TIGHTEN!

0123456

1/2 1/2 1/2 1/2 1/2 1/2

Inhaltsverzeichnis

Andere ParaBody Fitnessgeräte Handbücher

ParaBody

ParaBody 778 Bedienungsanleitung

ParaBody

ParaBody 808 Bedienungsanleitung

ParaBody

ParaBody Free Weight Smith System Bedienungsanleitung

ParaBody

ParaBody 777101 Bedienungsanleitung

ParaBody

ParaBody 704101 Montageanleitung

ParaBody

ParaBody 824 Bedienungsanleitung

ParaBody

ParaBody 827103 Bedienungsanleitung

ParaBody

ParaBody 880 Bedienungsanleitung

ParaBody

ParaBody 844 Bedienungsanleitung

ParaBody

ParaBody 886101 Bedienungsanleitung

ParaBody

ParaBody 824 Bedienungsanleitung

ParaBody

ParaBody 884 Bedienungsanleitung

ParaBody

ParaBody 781 Bedienungsanleitung

ParaBody

ParaBody 813 Bedienungsanleitung

ParaBody

ParaBody 888101 Bedienungsanleitung

ParaBody

ParaBody 883101 Bedienungsanleitung

ParaBody

ParaBody 835101 Montageanleitung

ParaBody

ParaBody 822104 Bedienungsanleitung

ParaBody

ParaBody 861 Montageanleitung

ParaBody

ParaBody 832102 Bedienungsanleitung

ParaBody

ParaBody 813102 Bedienungsanleitung

ParaBody

ParaBody GS6-LP5A-101 Bedienungsanleitung

ParaBody

ParaBody Serious Steel 835102 Bedienungsanleitung

ParaBody

ParaBody 893104 Bedienungsanleitung

Beliebte Fitnessgeräte Handbücher anderer Marken

NSD

NSD PB-188P Bedienungsanleitung

Performance

Performance HyperVibe Bedienungsanleitung

Scalamobil

Scalamobil S27 Bedienungsanleitung

Precor

Precor Experience Series Bedienungsanleitung

FYTTER

FYTTER RedMIUM BENCH BE-T6R Bedienungsanleitung

Taurus

Taurus TF-RK1312 Bedienungsanleitung

Nustep

Nustep T5 Bedienungsanleitung

Precor

Precor CW-507 Bedienungsanleitung

Movement

Movement BICEPS Idea Bedienungsanleitung

Kegel8

Kegel8 V For Men Bedienungsanleitung

BLK BOX

BLK BOX 21-0122-0B Bedienungsanleitung

Stamina

Stamina aeropilates premier 299 Bedienungsanleitung

SPORTSTECH

SPORTSTECH PBX300 Bedienungsanleitung

Weslo

Weslo Gym 650 Bedienungsanleitung

Rebel

Rebel ACTIVE RBA-1011 Bedienungsanleitung

4iiii

4iiii FLiiiight Bedienungsanleitung

Image

Image 540 Bedienungsanleitung

SteelFlex

SteelFlex PLHP Kurzanleitung