ParaBody Hip Sled System Bedienungsanleitung

835 HIP SLED SYSTEM

CLASSH

PART # 7339501

REV.B Revision:12/09/02

USER’S GUIDE

WARNING:

Read and follow all directions

for each step to insure proper

assembly of this product.

Version: 835109

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF

EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES!

1. Before using, read all the warnings and instructions

on the use of this machine. Use only for intended

exercise. DO NOT modify the machine.

2. Obtain a medical exam before beginning any

exercise program.

3. Keep body and clothing free of all moving objects.

4. Inspect the machine before use. DO NOT use it if it

appears damaged. DO NOT attempt to fix a broken or

ammed machine. Notify your authorized ParaBody

dealer before use and have repairs made by an

authorized service technician.

5. Be certain that weight pin is completely inserted.

Use only the pin provided by the manufacturer. If

unsure, call your authorized ParaBody dealer.

6. Never pin the weights or prop plate into an elevated

position. DO NOT use the machine if found in this

condition. DO NOT attempt to fix. Notify your

authorized ParaBody dealer.

7. Inspect cables and their connections before using

machine. Pay particular attention to the cable ends.

DO NOT attempt to fix. Notify your authorized

ParaBody dealer before use and have repairs made by

an authorized service technician.

8. Make sure all spring loaded pull pins are fully

engaged in the adjustment position and fully tighten

thumbscrew before use.

9. Children must not be allowed near this machine.

Supervise teenagers.

IMPORTANT SAFETY INFORMATION

TABLE OF CONTENTS

Safety Statement.............2

General Notes..................3

Tools Required................3

Gym Layout.....................4

NOTE: In a continual effort to improve our products, specifications are subject to change

ParaBody is a trademark of Brunswick Corporation

www.parabody.com

Parts list..........................5

Assembly Instructions.....6-21

General Maintenance.......22

Warranty Statement..........23

Product Services..............24

Insert-Registration Card

IMPORTANT NOTES

Please note:

Tools Required forAssembly

* Thank you for purchasing the ParaBody 835 Hip Sled System. Please read these

instructions thoroughly and keep them for future reference. This product must be assembled

on a flat, level surface to assure its proper function.

NOTE:BOLTLENGTH IS MEASURED FROMTHEUNDERSIDEOFTHEHEADOFTHEBOLT.

BOLT LENGTH RULER:

* This product must be assembled on a flat, level surface to assure its proper function. DO NOT

securely tighten any frame connections until the entire frame has been assembled, unless

otherwise stated.

Bolt Length Ruler

0123456

1/2 1/2 1/2 1/2 1/2 1/2

BOLT LENGTH

* 3/4” wrench

* 9/16” wrench

* Ratchet with 3/4” and 9/16” sockets

* Adjustable wrench

* Tape measure

1 Square = 1’ X 1’

1’

7’

6’

5’

4’

3’

2’

8’

1’ 2’ 3’ 4’ 5’

9’

PARTS LIST

PART #

LEA6504909

LEA6506809

LEA7337609

LEA6507709

LEA6507809

LEA6667809

LEA6505910

LEA7337309

LEA7337409

LEA6504410

LEA7337710

LEA6506610

LEA6507010

LEA6521210

LEA6534310

LEA6667910

LEA6509221

LEA6666921

LEA6667321

LEA6500501

LEA6500601

LEA3103101

LEA3103104

LEA3116001

KEY

QTY

PART #

LEA6270501

LEA6405201

LEA6416601

LEA7234801

LEA3114403

LEA3114502

LEA3114702

LEA3114401

LEA3114701

LEA3235501

LEA3235204

LEA3235208

LEA3235212

LEA3235218

LEA3235405

LEA3235311

LEA3235313

LEA3235316

LEA3235318

LEA3235320

LEA3110002

LEA6020601

LEA6466901

DESCRIPTION

4 X 14” NON-SKID STRIP

2” SQ. END CAP

1-1/2” X 3/4” PARAGLIDE

2” SQ. COVER CAP

3/8” WASHER

3/8” LOCK WASHER

3/8” LOCK NUT

1/2” WASHER

1/2” LOCK NUT

1/2” LOW HEIGHT LOCK NUT

3/8 X 1” BOLT

3/8 X 2” BOLT

3/8 X 3” BOLT

3/8 X 4-1/2” BOLT

1/2 X 1-1/4” BOLT

1/2 X 2-3/4” BOLT

1/2 X 3-1/4” BOLT

1/2 X 4” BOLT

1/2 X 4-1/2” BOLT

1/2 X 5” BOLT

1-1/4” ROLL PIN

1/2” FLANGE BEARING

1/2” DIA. SPRING PIN

QTY

DESCRIPTION

BASE

PLATFORM SLEEVE

PAD SUPPORT

RIGHT HANDLE

LEFT HANDLE

REARUPRIGHT

CARRIAGESTOPBAR

LEFTRAIL

RIGHTRAIL

FOOTPLATE

PLATFORM

PLATFORMADJUSTMENT

WEIGHT SUPPORT

ADJ.WHEELBRACKET

PAD STOP

CARRIAGE

SHOULDER PAD

SEATPAD

BACKPAD

3” DIA. WHEEL

2” DIA. WHEEL

1-1/4 X 5” GRIP

1 X 5” GRIP

1-1/4” SQ. RUBBER BUMPER

KEY

FIGURE 1

STEP 1:

• LOOSELY assemble the RIGHT(4) andLEFTHANDLES (5) to the BASE (1) on theirrespectivesidesusingfour3/8X 3” BOLTS (37),

eight3/8”WASHERS(29), andfour 3/8”LOCKNUTS(31)(DONOTSECURELY TIGHTENATTHISTIME)

0123456

1/2 1/2 1/2 1/2 1/2 1/2

• SECURELY assemble the REAR UPRIGHT (6) to the BASE (1) as shown in FIGURE 1 using two 1/2 X 3-1/4” BOLTS (41), four

1/2” WASHERS (32), and two 1/2” LOCK NUTS (33).

3/8 X 3” 37

41 1/2 X3-1/4”

DO NOT SECURELY TIGHTEN

AT THIS TIME

FIGURE 2

STEP 2:

• Insert four 1/2” FLANGE BEARINGS (46) into the BUSHINGS on the BASE (1), and four 1/2” FLANGE BEARINGS (46) into

the BUSHINGS on the PLATFORM (11) as shown in FIGURE 2.

• Assemble the PLATFORM (11) between the BUSHINGS on the BASE (1) as shown in FIGURE 2 using two 1/2 X 5” BOLTS (44)

and two 1/2” LOCK NUTS (33). (TIGHTEN THE CONNECTION ENOUGHTO REMOVE THEPLAY, YETALLOWING

THEPLATFORMTOROTATEFREELY)

FIGURE 3

STEP 3:

• Attach four 1-1/2 X 3/4” PARAGLIDE STRIPS (27) to the end of

the PLATFORM ADJUSTMENT (12), and four 1-1/2 X 3/4”

PARAGLIDE STRIPS (27) to the end of the PLATFORM SLEEVE

as shown in FIGURE 3 using the following steps:

• Thoroughly clean all surfaces where the PARAGLIDE

STRIPS (27) are to be attached.

• Remove the PARAGLIDE STRIPS (27) from the paper

backing and firmly apply them to all shown surfaces.

• SECURELY Assemble one 1/2” DIA. SPRING PIN (47) to the

SPRING PIN HOUSING, on the PLATFORM SLEEVE (2) as

shown in FIGURE 3. (!!!IMPORTANT!!! TIGHTENTHE

NUT OFTHE SPRING PIN SECURELY)

44 1/2 X 5”

441/2X 5”

STEP 4:

0123456

1/2 1/2 1/2 1/2 1/2 1/2

• Assemble the PLATFORM SLEEVE (2) to the BASE (1) as shown in FIGURE 4 using one 1/2 X 4” BOLT (42), and one 1/2”

LOCK NUT (33). (TIGHTEN THE CONNECTION ENOUGHTO REMOVE THE PLAY, YETALLOWINGTHE PLAT-

FORMSLEEVETOROTATE FREELY)

• Pull back the 1/2” DIA. SPRING PIN (47) on the PLATFORM SLEEVE (2) and insert the PLATFORM ADJUSTMENT (12) into

it. Slide the PLATFORM ADJUSTMENT (12) down to the first adjustment hole and release the SPRING PIN (47).

• Assemble the PLATFORM ADJUSTMENT (12) to the PLATFORM (11) as shown in FIGURE 4 using one 1/2 X 4” BOLT (42),

and one 1/2” LOCK NUT (33). (TIGHTEN THE CONNECTION ENOUGHTO REMOVE THE PLAY,YETALLOWING

THEPLATFORMADJUSTMENTTOROTATEFREELY)

1/2 X 4” 42

FIGURE 4 33

1/2 X 4” 42

SECURELYTIGHTEN

HANDLESBOTHSIDES

FIGURE 5

STEP 5:

• LOOSELY assemble the LEFT (8) and RIGHT RAILS (9), along with the SEAT PAD (18) to the BASE (1) as shown in FIGURE 5

using two 3/8 X 4-1/2” BOLTS (38), two 3/8” LOCK WASHERS (30), and two 3/8” WASHERS (29). Temporarily assemble the

RAILS to the REAR UPRIGHT (6) using two 1/2 X 4-1/2” BOLTS (43) to aid in the assembly of this step.

43 1/2 X 4-1/2”

3/8 X 4-1/2” 38

30 29

FIGURE 6

STEP 6:

0123456

1/2 1/2 1/2 1/2 1/2 1/2

• Insert four 2” SQ. END CAPS (26) into the each end of the CARRIAGE (16) as shown in FIGURE 6.

• SECURELY assemble four 3” DIA. WHEELS (20) to the sides of the CARRIAGE (16) as shown in FIGURE 6 using four 1/2 X

4-1/2” BOLTS (43), eight 1/2” WASHERS (32), and four 1/2” LOW HEIGHT LOCK NUTS (34).

1/2 X 4-1/2” 43

34 LOW

HEIGHT

• Attach one 4 X 14” NON SKID STRIP (25) to the CARRIAGE (16) as shown in FIGURE 6.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ParaBody Fitnessgeräte Handbücher

ParaBody

ParaBody 832101 Bedienungsanleitung

ParaBody

ParaBody 375101 Bedienungsanleitung

ParaBody

ParaBody Serious Steel 835102 Bedienungsanleitung

ParaBody

ParaBody 503 Montageanleitung

ParaBody

ParaBody 886 Montageanleitung

ParaBody

ParaBody 883 Bedienungsanleitung

ParaBody

ParaBody 874104 Montageanleitung

ParaBody

ParaBody Serious Steel 359101 Bedienungsanleitung

ParaBody

ParaBody 781 Bedienungsanleitung

ParaBody

ParaBody Parabody 805 Bedienungsanleitung

ParaBody

ParaBody 705101 Montageanleitung

ParaBody

ParaBody 849 Bedienungsanleitung

ParaBody

ParaBody 827101 Montageanleitung

ParaBody

ParaBody 914101 Bedienungsanleitung

ParaBody

ParaBody Free Weight Smith System Bedienungsanleitung

ParaBody

ParaBody 778 Bedienungsanleitung

ParaBody

ParaBody 777 Bedienungsanleitung

ParaBody

ParaBody 870 Bedienungsanleitung

ParaBody

ParaBody 808106 Bedienungsanleitung

ParaBody

ParaBody 874 Bedienungsanleitung

ParaBody

ParaBody 832102 Bedienungsanleitung

ParaBody

ParaBody Leg Press 5 Bedienungsanleitung

ParaBody

ParaBody 844 Bedienungsanleitung

ParaBody

ParaBody Parabody 805 Montageanleitung

Beliebte Fitnessgeräte Handbücher anderer Marken

NSD

NSD PB-188P Bedienungsanleitung

Performance

Performance HyperVibe Bedienungsanleitung

Scalamobil

Scalamobil S27 Bedienungsanleitung

Precor

Precor Experience Series Bedienungsanleitung

FYTTER

FYTTER RedMIUM BENCH BE-T6R Bedienungsanleitung

Taurus

Taurus TF-RK1312 Bedienungsanleitung

Nustep

Nustep T5 Bedienungsanleitung

Precor

Precor CW-507 Bedienungsanleitung

Movement

Movement BICEPS Idea Bedienungsanleitung

Kegel8

Kegel8 V For Men Bedienungsanleitung

BLK BOX

BLK BOX 21-0122-0B Bedienungsanleitung

Stamina

Stamina aeropilates premier 299 Bedienungsanleitung

SPORTSTECH

SPORTSTECH PBX300 Bedienungsanleitung

Weslo

Weslo Gym 650 Bedienungsanleitung

Rebel

Rebel ACTIVE RBA-1011 Bedienungsanleitung

4iiii

4iiii FLiiiight Bedienungsanleitung

Image

Image 540 Bedienungsanleitung

SteelFlex

SteelFlex PLHP Kurzanleitung