ParaBody GS6-LP5A-101 Bedienungsanleitung

LEG PRESS ADAPTER KIT

CLASS H

PART#7363201

REV. A Revision: 11/01/02

USER’S GUIDE

WARNING:

Read and follow all directions

for each step to insure proper

assembly of this product.

FOR GS6 GYM SYSTEM

Version:GS6-LP5A-101

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF

EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES!

1. Before using, read all the warnings and instructions

on the use of this machine. Use only for intended

exercise. DO NOT modify the machine.

2. Obtain a medical exam before beginning any

exercise program.

3. Keep body and clothing free of all moving objects.

4. Inspect the machine before use. DO NOT use it if it

appears damaged. DO NOT attempt to fix a broken or

ammed machine. Notify your authorized ParaBody

dealer before use and have repairs made by an

authorized service technician.

5. Be certain that weight pin is completely inserted.

Use only the pin provided by the manufacturer. If

unsure, call your authorized ParaBody dealer.

6. Never pin the weights or prop plate into an elevated

position. DO NOT use the machine if found in this

condition. DO NOT attempt to fix. Notify your

authorized ParaBody dealer.

7. Inspect cables and their connections before using

machine. Pay particular attention to the cable ends.

DO NOT attempt to fix. Notify your authorized

ParaBody dealer before use and have repairs made by

an authorized service technician.

8. Make sure all spring loaded pull pins are fully

engaged in the adjustment position and fully tighten

thumbscrew before use.

9. Children must not be allowed near this machine.

Supervise teenagers.

IMPORTANT SAFETY INFORMATION

TABLE OF CONTENTS

Safety Statement.............2

General Notes..................3

Tools Required................3

NOTE: In a continual effort to improve our products, specifications are subject to change

ParaBody is a trademark of Brunswick Corporation

www.parabody.com

Parts list..........................4

Assembly Instructions.....4-12

Insert-Registration Card

IMPORTANT NOTES

Please note:

Tools Required for Assembly

* Thank you for purchasing the ParaBody GS6 Leg Press Adapter Kit. Please read these

instructions thoroughly and keep them for future reference. This product must be assembled

on a flat, level surface to assure its proper function.

* 9/16” wrench

* Ratchet with 9/16” socket

*Adjustable wrench

* Tape measure

NOTE: BOLT LENGTH IS MEASURED FROM THE UNDERSIDE OFTHE HEAD OF THE BOLT.

BOLT LENGTH RULER:

* This product must be assembled on a flat, level surface to assure its proper function. DO NOT

securely tighten any frame connections until the entire frame has been assembled, unless

otherwise stated.

Bolt Length Ruler

0123456

1/2 1/2 1/2 1/2 1/2 1/2

BOLT LENGTH

PARTS LIST

NOTE: TheLEGPRESSATTACHMENT(LP5)mustbeassembledbeforeconnectingittothePARABODYGS6GYMSYSTEM

PART #

ACU04-1552

ACU04-1172

ACU04-1553

ACU04-1171

ACU02-0055

ACU13-0155

ACU13-0156

ACU06-0024

ACUDA1E03843416NB

QTY

PART #

ACUDA1E03833416NB

ACUDA1E03823416NB

ACUDA1E03813416NB

ACUDC1250100020B

ACUDB2E03811000B

ACU05-0381

ACU08-0085

ACU08-0079

ACU08-0076

DESCRIPTION

3/8”X3-3/4” BOLT

3/8X2-3/4”BOLT

3/8X1-3/4”BOLT

3/8”WASHER

3/8”LOCK NUT

5/16X15/16”SPACER

STEPSPACER 19/32”

STEPSPACER1-11/16”

STEPSPACER 1-19/32”

QTY

DESCRIPTION

CONNECTINGTUBE

FLOATINGPULLEYBRACKET

PULLEYHOUSING

PULLEYGUARD

CABLERETAINER

LATCABLE 128-3/4”

LEGPRESSCABLE160-3/4

3-1/2”PULLEY

3/8X4-3/4”BOLT

KEY

FIGURE 1

STEP 1:

• SECURELYassembletheLEGPRESStottheCONNECTINGTUBE(1) using two 3/8 X 3-3/4”BOLTS (10), two 3/8”WASHERS(13)and

two3/8” LOCKNUTS (14) as shown in FIGURE 1.

• RemoveEND CAPfromthe BASEand insert new CONNECTINGTUBE(1) using two 3/8 X 3-3/4” BOLTS(10), four 3/8”WASHERS

( 13) and two 3/8” LOCK NUTS (14). Re-install endcap.

BASE

LEGPRESS

0123456

1/2 1/2 1/2 1/2 1/2 1/2

3/8X 3-3/4” 10

10 3/8X 3-3/4”

FIGURE 3

STEP3:

• Remove and DISCARD the LAT CABLE as shown in FIGURE 3.

LATCABLE

DISCARD!

• Install the PULLEYHOUSING (3) to the BASE using two 3/8 X 3-3/4” BOLTS (10) and two 3/8” LOCK NUTS (14) as shown in

FIGURE2

FIGURE 2

STEP 2:

BASE

10 3/8X 3-3/4”

FIGURE 4

STEP4:

0123456

1/2 1/2 1/2 1/2 1/2 1/2

• SECURELYassembleone 3-1/2 PULLEY(8)to the FLOATING PULLEYBRACKET(2)using one 3/8 X 1-3/4”BOLT(12)andone3/8”

LOCKNUT(14)as shown in FIGURE 4.

• RoutetheLATCABLE(6) around the the PULLEYS in the TOPPLATEASSEMBLY. SECURELYassembleone3-1/2”PULLEY(8) to the

TOPPLATEASSEMBLE using one 3/8X 3-3/4”BOLT(10), one PULLEYGUARD (4), one 5/16 X 15/16” SPACER (15) and one3/8”

LOCKNUT (14)as shown in FIGURE 4. Finish routing the LATCABLE through the FRONTFRAME.

• Screw the threaded end of the new LAT CABLE (6) into the end of the HEAD PLATEASSEMBLY.

3/8X 1-3/4” 12

3/8X 3-3/4” 10

TOPPLATEASSEMBLY

FRONTFRAME

FIGURE 5

STEP5:

• Assemble one3-1/2PULLEY(8)tothePULLEYHOUSING (3)usingone 3/8X1-3/4”BOLT(12)andone3/8”LOCKNUT(14) asshown

inFIGURE5. (NOTE: LEGCABLEMUSTBEPLACEDIN PULLEYHOUSINGBEFOREINSTALLING PULLEY)

• Screwthe threaded end of the LEG PRESS CABLE (7) into the endof the FLOATING PULLEYBRACKET(2) as shown in FIGURE 5.

14 8

12 3/8X 1-3/4”

FIGURE 6

STEP6:

SEATFRAME

12 3/8X 1-3/4”

BRACKET

0123456

1/2 1/2 1/2 1/2 1/2 1/2

• Carefully route the LEG PRESS CABLE (7) around one 3-1/2” PULLEY(8) and SECURELYassemble the 3-1/2” PULLEY(8) to the

BRACKET(from the LP5 LEGPRESS) using one3/8 X 1-3/4” BOLT(12), one 3/8”WASHER (13),one CABLE RETAINER (5)

and one 3/8” LOCK NUT (14) as shown in FIGURE 5. Make sure the CABLE is in the grooves of all the pulleys.

FIGURE 8

STEP 8:

• Carefully route the LEG PRESS CABLE (7) around one 3-1/2” PULLEY(8) and SECURELYassemble the 3-1/2” PULLEY (5) to the

bracket on the SEAT FRAME using one 3/8 X 1-3/4” BOLT (12) and one 3/8” LOCK NUT(14) as shown in FIGURE 8 . Make sure the

CABLE is in the grooves of all the pulleys.

3/8X 1-3/4” 12

714

SEATFRAME

FIGURE 7

STEP7:

SEAT FRAME

• SECURELYattachthe BRACKET (from LP5LEG PRESS) tothe SEATFRAMEusing two 3/8”X 4-3/4” BOLTS (9), two3/8”WASH-

ERS(13),andtwo3/8”LOCKNUTS(14).SeeFIGURE7.

BRACKET

3/8X 4-3/4”

FIGURE 9

STEP9:

• CarefullyroutetheLEGPRESSCABLE (7) around one 3-1/2”PULLEY(8)andSECURELYassemble the3-1/2”PULLEY(8) to the SEAT

FRAMEusingone3/8X4-3/4”BOLT(9),two1-19/32” STEPSPACERS (18) and one 3/8” LOCKNUT(14)as shown in FIGURE 9. Make

sure the CABLE is in the grooves of all the pulleys.

3/8 X 4-3/4” 9

MAINARM

FIGURE 10

STEP10:

• Carefullyroute the LEG PRESS CABLE (7) around one 3-1/2” PULLEY(8)and SECURELYassemble the 3-1/2” PULLEY(8) to the

MAINARM using one 3/8 X 2-3/4” BOLT (11), two 19/32” STEPSPACERS (16) and one 3/8” LOCK NUT (14) as shown in FIGURE

10. Make sure the CABLE is in the grooves of all the pulleys.

3/8X 2-3/4” 11

SEATFRAME

Andere ParaBody Fitnessgeräte Handbücher

ParaBody

ParaBody 848 Bedienungsanleitung

ParaBody

ParaBody 894 Bedienungsanleitung

ParaBody

ParaBody 821 Bedienungsanleitung

ParaBody

ParaBody 832102 Bedienungsanleitung

ParaBody

ParaBody 874 Montageanleitung

ParaBody

ParaBody PBF 472 Bedienungsanleitung

ParaBody

ParaBody 474 Bedienungsanleitung

ParaBody

ParaBody 503 Montageanleitung

ParaBody

ParaBody 476 Montageanleitung

ParaBody

ParaBody 874104 Montageanleitung

ParaBody

ParaBody Free Weight Systems Bedienungsanleitung

ParaBody

ParaBody 861 Montageanleitung

ParaBody

ParaBody Parabody 805 Montageanleitung

ParaBody

ParaBody 838101 Bedienungsanleitung

ParaBody

ParaBody 849 Bedienungsanleitung

ParaBody

ParaBody 441101 440 Bedienungsanleitung

ParaBody

ParaBody Leg Press 100 Bedienungsanleitung

ParaBody

ParaBody 823 Bedienungsanleitung

ParaBody

ParaBody 778 Bedienungsanleitung

ParaBody

ParaBody 350 HOME GYM Bedienungsanleitung

ParaBody

ParaBody 843 Bedienungsanleitung

ParaBody

ParaBody PBF005C Bedienungsanleitung

ParaBody

ParaBody 807 BODYSYSTEM Montageanleitung

ParaBody

ParaBody 884 Bedienungsanleitung

Beliebte Fitnessgeräte Handbücher anderer Marken

NSD

NSD PB-188P Bedienungsanleitung

Performance

Performance HyperVibe Bedienungsanleitung

Scalamobil

Scalamobil S27 Bedienungsanleitung

Precor

Precor Experience Series Bedienungsanleitung

FYTTER

FYTTER RedMIUM BENCH BE-T6R Bedienungsanleitung

Taurus

Taurus TF-RK1312 Bedienungsanleitung

Nustep

Nustep T5 Bedienungsanleitung

Precor

Precor CW-507 Bedienungsanleitung

Movement

Movement BICEPS Idea Bedienungsanleitung

Kegel8

Kegel8 V For Men Bedienungsanleitung

BLK BOX

BLK BOX 21-0122-0B Bedienungsanleitung

Stamina

Stamina aeropilates premier 299 Bedienungsanleitung

SPORTSTECH

SPORTSTECH PBX300 Bedienungsanleitung

Weslo

Weslo Gym 650 Bedienungsanleitung

Rebel

Rebel ACTIVE RBA-1011 Bedienungsanleitung

4iiii

4iiii FLiiiight Bedienungsanleitung

Image

Image 540 Bedienungsanleitung

SteelFlex

SteelFlex PLHP Kurzanleitung