Pilz PNOZ m EF 8DI4DO Bedienungsanleitung

Operating Manual — No. 1002661-EN-01

Configurable Control System PNOZmulti

Operating Manual PNOZ m EF 8DI4DO

PNOZ m EF 8DI4DO

This document is a translation of the original document.

All rights to this documentation are reserved by Pilz GmbH & Co. KG. Co ies may be made

for internal ur oses.

Suggestions and comments for im roving this documentation will be gratefully received.

Pilz®, PIT®, PMI®, PNOZ®, Primo®, PSEN®, PSS®, PVIS®, SafetyBUS ®, SafetyEYE®,

SafetyNET ®, the s irit of safety® are registered and rotected trademarks of

Pilz GmbH & Co. KG in some countries.

SD means Secure Digital.

Preface

Contents

Contents Page

Chapter 1 Introduction

1.1 Validity of the documentation 1-1

1.1.1 Retaining the documentation 1-1

1.2 Overview of documentation 1-2

1.3 Definition of symbols 1-3

Chapter 2 Overview

2.1 Unit structure 2-1

2.1.1 Scope of supply 2-1

2.1.2 Unit features 2-1

2.2 Front view 2-2

Chapter 3 Safety

3.1 Intended use 3-1

3.1.1 System requirements 3-1

3.2 Safety regulations 3-2

3.2.1 Use of qualified personnel 3-2

3.2.2 Warranty and liability 3-2

3.2.3 Disposal 3-2

3.2.4 For your safety 3-3

Chapter 4 Function description

4.1 Device properties 4-1

4.1.1 Integrated protection mechanisms 4-1

4.1.2 Function description 4-1

4.1.2.1 Operation 4-1

4.1.2.2 Internal wiring diagram 4-1

Chapter 5 Installation

5.1 General installation guidelines 5-1

5.2 Dimensions 5-2

5.3 Connect the base unit and expansion

modules

5-3

Chapter 6 Commissioning

6.1 General wiring guidelines 6-1

6.2 Preparing for operation 6-2

6.2.1 Download modified project to the

PNOZmulti safety system

6-2

6.2.2 Connection 6-2

Chapter 7 Operation

7.1 Messages 7-1

Contents

Chapter 8 Technical details

8.1 Technical details 8-1

8.2 Permitted ambient temperature Tamb de-

pendent on the total current Isum

8-4

8.3 Order reference 8-5

1-1

1.1 Validity of the documentation

1 Introduction

11000IntroductionIntroduction1-1.1Validity of the documentation1100Validity of the documentation1-Einf Gltigkeit der Dokumentation

This documentation is valid for the product PNOZ m EF 8DI4DO. It is

valid until new documentation is published.

Einf Einleitung_alt

This operating manual explains the function and operation, describes

the installation and provides guidelines on how to connect the product

PNOZ m EF 8DI4DO.

Application of the product PNOZ m EF 8DI4DO:

Verwendung/Bildunterschrift_multi_Modul

Expansion module for connection to a base unit from the configurable

control system PNOZmulti

1.1.1 Retaining the documentation

Retaining the documentation1-Einf Aufbewahren

This documentation is intended for instruction and should be retained

for future reference.

1.2 Overview of documentation

1 Introduction

1-2

1.2Overview of documentation1200Overview of documentation1-Einf_Uebersicht_über_die_Doku_6_Inbetriebnahme

1 Introduction

The introduction is designed to familiarise you with the contents, struc-

ture and specific order of this manual.

2 Overview

This chapter provides information on the product's most important fea-

tures.

3 Safety

This chapter must be read as it contains important information on in-

tended use.

4 Function Description

This chapter describes the product's mode of operation.

5 Installation

This chapter explains how to install the product.

6 Commissioning

This chapter describes the product's commissioning and wiring.

7 Operation

This chapter describes how to operate the product and gives tips in the

case of a fault.

8 Technical Details

This chapter contains the product's technical details and order refer-

ence.

1-3

1.3 Definition of symbols

1 Introduction

1.3Definition of symbols1300Definition of symbols1-Einfhrung Zeichen

Information that is particularly important is identified as follows:

DANGER!

This warning must be heeded! It warns of a hazardous situation

that poses an immediate threat of serious injury and death and

indicates preventive measures that can be taken.

WARNING!

This warning must be heeded! It warns of a hazardous situation

that could lead to serious injury and death and indicates preven-

tive measures that can be taken.

CAUTION!

This refers to a hazard that can lead to a less serious or minor

injury plus material damage, and also provides information on

preventive measures that can be taken.

NOTICE

This describes a situation in which the unit(s) could be damaged

and also provides information on preventive measures that can

be taken. It also highlights areas within the text that are of partic-

ular importance.

INFORMATION

This gives advice on applications and provides information on

special features.

1 Introduction

1-4

2-1

2.1 Unit structure

2 Overview

22000OverviewOverview2-2.1Unit structure2100Unit structure2-

2.1.1 Scope of supply

Scope of supply2-Lieferumfang_Brck_779260_modul_mini_BA

Expansion modulePNOZ m EF 8DI4DO

Jumper 779 260

2.1.2 Unit features

Unit features2-Geraetemerkmale_Zusatz BA Einleitung

The product has the following features:

Gertemerkmale Can be configured in the PNOZmulti Configurator

Semiconductor outputs:

4 safety outputs

Depending on the application, up to PL e of EN ISO 13849-1 and up

to SIL CL 3 of EN IEC 62061

8 inputs for connecting, for example:

– E-STOP pushbuttons

– Two-hand pushbuttons

– Safety gate limit switches

– Reset buttons

– Light beam devices

– Scanners

– Enabling switches

– PSEN

– Operating mode selector switches

LED for:

– Error messages

– Diagnostics

– Supply voltage

– Output circuits

– Input circuits

Test pulse outputs used to monitor shorts across the inputs

Monitoring of shorts between the safety outputs

Plug-in connection terminals:

Either spring-loaded terminal or screw terminal available as an acces-

sory (see order reference)

Gerätemerkmal_multi_Modul_Anschluss_Basis Please refer to the document "PNOZmulti System Expansion" for the

PNOZmulti base units that can be connected

2.2 Front view

2 Overview

2-2

2.2Front view2200Front view2-Klemmenbelegung

Legende

Key:

0 V, 24 V: Supply connections

Inputs I0 – I7

Outputs O0 – O3

LEDs:

–POWER

–Run

–Diag

–Fault

–IFault

–OFault

Andere Handbücher für PNOZ m EF 8DI4DO

Inhaltsverzeichnis

Andere Pilz Steuereinheit Handbücher

Pilz

Pilz PNOZ m ES Powerlink Bedienungsanleitung

Pilz

Pilz PSEN cs5.11n Bedienungsanleitung

Pilz

Pilz PNOZ m EF 16DI Bedienungsanleitung

Pilz

Pilz PNOZ mc4p Bedienungsanleitung

Pilz

Pilz ms3p HTL Bedienungsanleitung

Pilz

Pilz PNOZ m EF 1MM Bedienungsanleitung

Pilz

Pilz PNOZ m0p Bedienungsanleitung

Pilz

Pilz PNOZ mml2p Bedienungsanleitung

Pilz

Pilz PNOZ mmc1p Bedienungsanleitung

Pilz

Pilz PZE 9P Bedienungsanleitung

Pilz

Pilz PSSuniversal PSSu H F PN Bedienungsanleitung

Pilz

Pilz PNOZ s11 Bedienungsanleitung

Pilz

Pilz PNOZ m EF 4DI4DOR Bedienungsanleitung

Pilz

Pilz PZE X4VP4 Bedienungsanleitung

Pilz

Pilz PNOZ m ES ETH Bedienungsanleitung

Pilz

Pilz PIT es Set10u-5c PCB Bedienungsanleitung

Pilz

Pilz PNOZ mmc4p Bedienungsanleitung

Pilz

Pilz PSSu E S INC 24V se Bedienungsanleitung

Pilz

Pilz PSEN ma1.3a/b-22 Bedienungsanleitung

Pilz

Pilz PSSu E F PS1-T Bedienungsanleitung

Pilz

Pilz PSS u2 ES 8DI Bedienungsanleitung

Pilz

Pilz PNOZ mc5.1p Bedienungsanleitung

Pilz

Pilz PNOZmulti PNOZ mmc3p Bedienungsanleitung

Pilz

Pilz PSSu E AI SHT2 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung