Pilz PSSuniversal PSSu H F PN Bedienungsanleitung

Operating Manual — No. 22071-EN-04

Decentralised system PSSuniversal I/O

Operating Manual PSSu H F PN

PSSu H F PN

This document is a translation of the original document.

All rights to this documentation are reserved by Pilz GmbH & Co. KG. Co ies may be made

for internal ur oses.

Suggestions and comments for im roving this documentation will be gratefully received.

Pilz®, PIT®, PMI®, PNOZ®, Primo®, PSEN®, PSS®, PVIS®, SafetyBUS ®, SafetyEYE®,

SafetyNET ®, the s irit of safety® are registered and rotected trademarks of

Pilz GmbH & Co. KG in some countries.

SD means Secure Digital.

Preface

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected] 1

Contents

Contents Page

Chapter 1 Introduction

1.1 Validity of documentation 1-1

1.1.1 Retaining the documentation 1-1

1.2 Overview of documentation 1-2

1.3 Definition of symbols 1-3

Chapter 2 Overview

2.1 Module features 2-1

2.2 Front view 2-2

Chapter 3 Safety

3.1 Intended use 3-1

3.2 Safety regulations 3-2

3.2.1 Use of qualified personnel 3-2

3.2.2 Warranty and liability 3-2

3.2.3 Disposal 3-2

Chapter 4 Function description

4.1 Module features 4-1

4.1.1 Integrated protection mechanisms 4-1

4.1.2 Supply voltage 4-1

4.1.3 Projects 4-1

4.2 PROFINET 4-3

4.2.1 Connection to PROFINET 4-3

4.2.2 DIP switch for setting the F address 4-4

Chapter 5 Installation

5.1 General installation guidelines 5-1

5.1.1 Dimensions 5-1

5.2 Installing the head module 5-2

Chapter 6 Interfaces

6.1 Interface configuration 6-1

6.1.1 Connection to PROFINET 6-1

Chapter 7 Operation

7.1 Display elements 7-1

Chapter 8 Technical details

8.1 Technical details 8-1

8.2 Order reference 8-3

Contents

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected] 1-1

1.1 Validity of documentation

1 Introduction

11000IntroductionIntroduction1-1.1Validity of documentation1100Validity of documentation1-][BA Einf Gültigkeit Kopfmodul ohne SB

This documentation is valid for the PSSu H F PN module. It is valid until

new documentation is published.

Please also refer to the following documents:

PSSuniversal System Description

PSSuniversal Installation Manual

Einf Einleitung

This operating manual explains the function and operation, describes

the installation and provides guidelines on how to connect the product .

1.1.1 Retaining the documentation

Retaining the documentation1-Einf Aufbewahren

This documentation is intended for instruction and should be retained

for future reference.

1.2 Overview of documentation

1 Introduction

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]

1-2

1.2Overview of documentation1200Overview of documentation1-][BA_Einführung Übersicht Kopfmodule

1 Introduction

The introduction is designed to familiarise you with the contents, struc-

ture and specific order of this manual.

2 Overview

This chapter provides information on the module's most important fea-

tures.

3 Safety

This chapter must be read as it contains important information on safety

and intended use.

4 Function Description

This chapter describes the module's individual components.

5 Installation

This chapter explains how to install the module.

6 Interfaces

This chapter describes the module's interfaces.

7 Operation

This chapter explains the display elements and advises on what to do if

a fault occurs.

8 Technical Details

This chapter contains the product's technical details and order refer-

ence.

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected] 1-3

1.3 Definition of symbols

1 Introduction

1.3Definition of symbols1300Definition of symbols1-Einfhrung Zeichen

Information that is particularly important is identified as follows:

DANGER!

This warning must be heeded! It warns of a hazardous situation

that poses an immediate threat of serious injury and death and

indicates preventive measures that can be taken.

WARNING!

This warning must be heeded! It warns of a hazardous situation

that could lead to serious injury and death and indicates preven-

tive measures that can be taken.

CAUTION!

This refers to a hazard that can lead to a less serious or minor

injury plus material damage, and also provides information on

preventive measures that can be taken.

NOTICE

This describes a situation in which the unit(s) could be damaged

and also provides information on preventive measures that can

be taken. It also highlights areas within the text that are of partic-

ular importance.

INFORMATION

This gives advice on applications and provides information on

special features.

1 Introduction

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]

1-4

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected] 2-1

2.1 Module features

2 Overview

22000OverviewOverview2-2.1Module features2100Module features2-Geraetemerkmale_Zusatz BA Einleitung

The product has the following features:

][Merkmale_Schnittstelle F PN PROFINET interface with PROFIsafe profile

][Merkm ale_LED F PN LEDs for:

– System status

–PROFINET status

–PROFIsafe status

][Merkmale_E-Module SB p und ST-Bus Electronic modules that can be used for input/output:

– All failsafe modules

(PSSu E F...)

– All standard modules

(PSSu E S...)

2.2 Front view

2 Overview

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]

2-2

2.2Front view2200Front view2-BA_Frontansicht

Key:

1: PROFINET interface X1

2: PROFINET interface X2

3: DIP switch for setting the F address

4 LEDs for PROFINET diagnostics

5: Labelling strip with:

– Order number

– Serial number

– Hardware version number

– Firmware version number on delivery

6: Field for 2D code

7: LEDs for diagnostics on the PROFINET connection

8: Description of head module

9: Chip card slot

CHIP

F-ADDRESS

OFF ON

128

256

PROFINET

PSSu H

F PN

312 040

0000000

HW 000

000

Tr1

Tr2

Li1

Li2

ADD

Inhaltsverzeichnis

Andere Pilz Steuereinheit Handbücher

Pilz

Pilz PRBT 6 Bedienungsanleitung

Pilz

Pilz PNOZ mc2.1p Bedienungsanleitung

Pilz

Pilz PNOZ ms4p Bedienungsanleitung

Pilz

Pilz PSSu E F 4DI Bedienungsanleitung

Pilz

Pilz PNOZ mc7p Bedienungsanleitung

Pilz

Pilz PNOZ m ES ETH Bedienungsanleitung

Pilz

Pilz PNOZ m EF 1MM Bedienungsanleitung

Pilz

Pilz PSS u2 ES 4DOD 0.5A Bedienungsanleitung

Pilz

Pilz PSEN cs5.1p Bedienungsanleitung

Pilz

Pilz PIT es Set/1 Bedienungsanleitung

Pilz

Pilz PNOZ m EF 2MM Bedienungsanleitung

Pilz

Pilz PSSu K S 16DO 0.5 Bedienungsanleitung

Pilz

Pilz PNOZ ma1p Bedienungsanleitung

Pilz

Pilz P2HZ X1.10P Bedienungsanleitung

Pilz

Pilz PSSu E F 4DO 0.5 Bedienungsanleitung

Pilz

Pilz PNOZ po3.1p Bedienungsanleitung

Pilz

Pilz PNOZ ms1p Bedienungsanleitung

Pilz

Pilz PNOZ mo4p Bedienungsanleitung

Pilz

Pilz mc1p coated Bedienungsanleitung

Pilz

Pilz PNOZmulti PNOZ mmc3p Bedienungsanleitung

Pilz

Pilz PSSu E PD Bedienungsanleitung

Pilz

Pilz PNOZ m EF Multi Link Bedienungsanleitung

Pilz

Pilz PIT gb Series Bedienungsanleitung

Pilz

Pilz PNOZ m ES CANopen Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung