Planet KVM-200 Bedienungsanleitung
2
TABLE OF CONTENTS
Chapter 1 Introduction .......................................3
1.1 Features.........................................................3
1.2 Package Contents..........................................4
1.3 Technical Specifications.................................4
Chapter 2 Installation .........................................5
2.1 System Requirements Specifications.............5
2.2 Product Details...............................................5
2.3 Hardware Installation.....................................7
Chapter 3 Operation ...........................................9
3.1 Select PC through push buttons ..................10
3.2 Select PC through Hot key...........................10
Chapter 4 Troubleshooting..............................12
3
Chapter 1
Introduction
Thank you for purchasing PLANET KVM switch. PLANET
KVM switch can save your MONEY, TIME, SPACE,
EQUIPMENT and POWER.
Control multiple PCs from one keyboard, mouse and VGA
monitor. PLANET KVM switch is loaded with features such
as hot-key, front panel push button and auto scan control. It
has complete keyboard and mouse emulation for
simultaneous PCs boot-up process.
1.1 Features
2/4-port KVM switch is compact size design and portable
Support Microsoft Intellimouse, Logitech Net Mouse, etc...
Support DOS, Win3.x, Win95/98/98SE/2000/ME/XP,
WinNT, Netware, Unix, Linux
Support iMAC, Power MAC and Sun Microsystems with
USB port (Need to work with USB-PS2 adapter)
Hot Plug - Add or remove connected PCs for maintenance
without powering down the KVM switch or PCs
Very High Video Quality - Up To 1920X1440, Bandwidth:
200MHz
No Software Required - easy PC selection via Push
Buttons, Hot Keys
Auto Scan Mode for monitoring PCs
Keyboard status restored when switching PCs
LED Display for easy status monitoring
Buzzer sound for switching port confirmation
4
1.2 Package Contents
KVM-200 KVM-400
♦ 2-port KVM switch
♦ User’s manual
♦ 4-port KVM switch
♦ User’s manual
1.3 Technical Specifications
Model KVM - 200 KVM - 400
PC Port 2 4
Console Port 1 1
MAX PC
Connections 2 4
LED 2 8
PC Port
Connector
(All Female Type)
PS/2 Keyboard mini-Din 6 pin
PS/2 Mouse Mini-Din 6 pin
VGA HDDB 15pin
Console port
connector
(All Female Type)
PS/2 Keyboard mini Din 6 pin
PS/2 Mouse Mini Din 6 pin
VGA HDDB 15pin
PC selection Hot Key / Button
Scan Intervals 8sec.
Keyboard
Emulation PS/2
Mouse Emulation
(Console port to
PC port)
PS/2
VGA Resolution Up to 1920X1440
Bandwidth 200MHz
Operating
Temperature 0 ~ 40 Degree C (32 ~ 104 Degree F)
Storage
Temperature -20 ~ 60 Degree C (-4 ~ 140 Degree F)
Humidity 0 ~ 80% RH, non-condensing
Weight (g) 440 720
Dimension (mm) 125X72X45 200X90x45
5
Chapter 2
Installation
2.1 System Requirements Specifications
Model KVM-200 KVM-400
VGA Monitor 1 1
PS/2 Keyboard 1 1
Console
side PS/2 Mouse 1 1
HDB-15 pin male to
male VGA cables 2 4
PS/2 cable male to
male for Keyboard 2 4
Computer
side
PS/2 cable male to
male for Mouse 2 4
Optional USB-PS2 adapter is required if connect to
computer with only USB keyboard/mouse
interface.
2.2 Product Details
Front panel & Rear panel of KVM-200:
Computer power
on/off status
12
Select
Power
KVM-200
2-Port KVM Switch
Connect to mouse PC selection
Connect to keyboard
6
Connect to computer’sVGA port
Monitor
Optional power adapter
Connector to computer’sPS/2 keyboard/mouse port
Front panel & Rear panel ofKVM-400:
Computer is selected
KVM-400
4-Port KVM Switch
Select
Power
On Line
1234
Reset
DC9V
Option
3 2 14
DC 9
V
Option
2 1
7
Reset the KVM switch
2.3 Hardware Installation
Before installation, please make sure all of peripherals and
computers have been turned off.
Step 1 Connecting Monitor to the KVM switch
Connect a VGA cable (15-pin HDDB Male / Male) with the
Male side to both of the Monitor and the rear panel of the KVM
switch unit.
Step 2 Connecting Keyboard & Mouse to the
KVM switch
Connect the keyboard and mouse to the KVM switch. If you
have an AT type keyboard, you will need an AT to PS/2
adapter.
Note: Only use PS/2’s keyboard and mouse.
Step 3 Connecting VGA port of PC(s) to the KVM
switch
Now the PC connections will be made with the monitor (VGA)
connections first. Connect a VGA cable (15-pin HDDB Male /
Male) with the Male side to both of the PC’s VGA output and
the rear panel of the KVM switch unit to the connector labeled
VGA. Repeat this for all PCs.
Step 4 Connecting keyboard and mouse port of
PC(s) to the KVM switch
Connect keyboard and mouse port of your PC to the rear panel
of the KVM switch.
Step 5 Double-check all of the connections
Please check step1 ~ step4 again and then power on the
computers.
8
Note: Please do not switch the PC port (i.e. Do not press
the push button of KVM switch or run hot key) during the
computers are under boot-up process.
9
This page intentionally left blank!
10
Chapter 3
Operation
3.1 Select PC through push buttons
KVM-200 / KVM-400 has separate push buttons on the
panel. Press each button to select respective PC port.
KVM-400 has also On Line LED for each PCs. When you
select one of four PCs and it is powered on, the selected
port On Line LED is lit. When you select one of four PCs
and it is shut down or disconnected from a PC, the selected
port ON Line LED flashed.
3.2 Select PC through Hot key
You can also conveniently command PLANET KVM to
switch ports through simple key sequences. To send
commands to PLANET KVM, The SCROLL LOCK key must
be pressed twice within 2 seconds. You will hear a beep for
confirmation.
Below are the different commands:
Previous Channel
Next Channel
Auto Scan
Scroll
Lock Scroll
Lock
S
Scroll
Lock Scroll
Lock
Scroll
Lock
Scroll
Lock
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Planet Schalten Handbücher
Planet
Planet HPOE-460 Bedienungsanleitung
Planet
Planet HPOE-1200G Bedienungsanleitung
Planet
Planet IGS-5225-4T2S Bedienungsanleitung
Planet
Planet IDL-2402 Bedienungsanleitung
Planet
Planet IGS-5225-4T2S Bedienungsanleitung
Planet
Planet IGS-10020PT Bedienungsanleitung
Planet
Planet GSD-604HP Bedienungsanleitung
Planet
Planet FSD-804PS Bedienungsanleitung
Planet
Planet WGSW-52040 Bedienungsanleitung
Planet
Planet DSP-1000 Bedienungsanleitung
Planet
Planet GSD-800S Bedienungsanleitung
Planet
Planet WS-1032P Bedienungsanleitung
Planet
Planet GS-6320-46S2C4XR Bedienungsanleitung
Planet
Planet GSW-1601 Bedienungsanleitung
Planet
Planet UH-421 Bedienungsanleitung
Planet
Planet GSW-1601 Bedienungsanleitung
Planet
Planet IGS-4215-4P4T Bedienungsanleitung
Planet
Planet GSD-805 Bedienungsanleitung
Planet
Planet WGSW-2620HP Bedienungsanleitung
Planet
Planet WGS-6325-8UP2X Bedienungsanleitung
