Pride Mobility PMV Series Bedienungsanleitung

Please fill out the following information for quick reference:

S.V.P. veuillez compléter les informations ci dessous:

Vul alstublieft de volgende informatie in voor snelle referentie:

Mein autorisierter Fachhändler ist:

Informazioni di riferimento:

Por favor, rellene la siguiente información para tener siempre a mano:

Provider:

Détaillant:

Leverancier:

Name:

Rivenditore:

Proveedor:

Address:

Adresse:

Adres

Adresse:

Indirizzo:

Dirección:

Telephone:

Téléphone:

Telefoon nummer:

Tel. Nummer:

Telefono:

Número de teléfono:

Purchase Date:

Date d’achat:

Koop Datum:

Kaufdatum:

Data di acquisto:

Fecha de compra:

INFORMATION

INFMANU4584/Rev B/May2015

INTENDED USE

The intended use of the mobility device is to provide mobility to persons limited to a seated position that

have the capability of operating a personal mobility vehicle (PMV).

NOTE: This owner’s manual is compiled from the latest specifications and product information

available at the time of publication. We reserve the right to make changes as they become necessary.

Any changes to our products may cause slight variations between the illustrations and explanations in

this manual and the product you have purchased. The latest/current version of this manual is available

on our website.

NOTE: This product is compliant with WEEE, RoHS, and REACH directives and requirements.

NOTE: This product meets IPX4 classification (IEC 60529).

NOTE: The PMV and its components are not made with natural rubber latex. Consult with the

manufacturer regarding any after-market accessories.

PMV Series 3

WARNING! An authorized Provider or qualified technician must perform the initial setup

of this PMV and must perform all of the procedures in this manual.

The symbols below are used throughout this owner’s manual and on the PMV to identify warnings

and important information. It is very important for you to read them and understand them completely.

WARNING! Indicates a potentially hazardous condition/situation. Failure to follow

designated procedures can cause either personal injury, component damage, or

malfunction. On the product, this icon is represented as a black symbol on a yellow

triangle with a black border.

MANDATORY! These actions should be performed as specified. Failure to perform

mandatory actions can cause personal injury and/or equipment damage. On the product,

this icon is represented as a white symbol on a blue dot with a white border.

PROHIBITED! These actions are prohibited. These actions should not be performed at

any time or in any circumstances. Performing a prohibited action can cause personal

injury and/or equipment damage. On the product, this icon is represented as a black

symbol with a red circle and red slash.

CONTENTS

SAFETY GUIDELINES .......................................................................................................................3

I. SAFETY........................................................................................................................................4

II. YOUR PMV..................................................................................................................................7

III. BATTERIES AND CHARGING..........................................................................................15

IV. OPERATION.............................................................................................................................22

V. COMFORT ADJUSTMENTS..............................................................................................24

VI. DISASSEMBLY AND ASSEMBLY...................................................................................28

VII. BASIC TROUBLESHOOTING ...........................................................................................29

VIII. CARE AND MAINTENANCE..............................................................................................31

SAFETY GUIDELINES

4PMV Series

MODEL #

I. SAFETY

PRODUCT SAFETY SYMBOLS

The symbols below are used on the PMV to identify warnings, mandatory actions, and prohibited actions.

It is very important for you to read and understand them completely.

NOTE: There are more warnings identified and explained in the Consumer Safety Guide that is

included with your PMV. Please become familiar with all the warnings and safety information found

in the Consumer Safety Guide and refer to this resource often.

Read and follow the information in the owner’s manual.

Manufactured in.

Indicates tie-down points on the PMV.

PMV information label.

Battery Set Configuration:

+ = Positive (Red) Terminal Post

- = Negative (Black) Terminal Post

Connect Red wires to Red Positive (+) Terminal Posts.

Connect Black wire to Black Negative (-) Terminal Posts.

PMV Series 5

I. SAFETY

GENERAL

MANDATORY! Do not operate your new PMV for the first time without completely reading

and understanding this owner’s manual and the Consumer Safety Guide.

Your PMV is a state-of-the-art life-enhancement device designed to increase mobility. We provide an

extensive variety of products to best fit the individual needs of the PMV user. Please be aware that the final

selection and purchasing decision regarding the type of PMV to be used is the responsibility of the PMV

user, who is capable of making such a decision.

The contents of this manual are based on the expectation that a mobility device expert has properly fitted

the PMV to the user.

There are certain situations, including some medical conditions, where the PMV user will need to practice

operating the PMV in the presence of a trained attendant. A trained attendant can be defined as a family

member or care professional specially trained in assisting a PMV user in various daily living activities.

As you begin using your PMV during daily activities, you will probably encounter situations in which you

will need some practice. Simply take your time and you will soon be in full and confident control as you

maneuver through doorways, on and off elevators, up and down ramps and over moderate terrain.

Additional general information can be found on the supplemental information sheets and booklets

included in your Owner’s Package. Please fully read and review the information, and keep it readily

available for future reference.

Below are some precautions, tips and other safety considerations that will help you become accustomed

to operating the PMV safely.

PRE-RIDE SAFETY CHECK

Get to know the feel of your PMV and its capabilities. We recommend that you perform a safety check

before each use to make sure your PMV operates smoothly and safely.

Perform the following inspections prior to using your PMV:

Check the condition of the tires. Make sure they are not damaged or excessively worn.

Check all electrical connections. Make sure they are tight and not corroded.

Check all harness connections. Make sure they are secured properly.

Check the brakes to ensure they operate properly.

Check the battery condition meter to ensure the batteries are fully charged.

Ensure the manual freewheel lever is in drive mode before sitting on the PMV.

If you discover a problem, contact your authorized Provider for assistance. Please refer to the Contact

Information insert in your Owner’s Package.

6PMV Series

I. SAFETY

BRAKING INFORMATION

Your PMV is equipped with these powerful brake systems:

Regenerative: Uses electricity to rapidly slow the vehicle when the throttle control lever returns to the

cener/stop position.

Disc Park Brake: Activates mechanically after regenerative braking slows the vehicle to near stop or

when power is removed from the system for any reason.

Handbrake: This lever provides you with emergency stopping power. See II. “Your PMV.”

HANDBRAKE LEVER

The handbrake lever contains hydraulic fluid. When the lever is depressed, the fluid is pushed through the

brake line to engage the brake pads against the brake discs. The handbrake lever is a completely sealed

unit, meaning that the hydraulic fluid should not leak; however, there are certain safety measures that

should be taken if the handbrake lever becomes cracked or damaged.

Do not touch spilled material unless wearing protective equipment, such as safety goggles and gloves.

For small spills, cover the material with dry earth, sand or other non-combustible absorbent material.

Once absorbed, enclose the material in a plastic bag and contact your local waste disposal agency for

proper disposal measures. Do not expose the material to waterways or sewers.

If the eyes are exposed, check for and remove contact lenses. Flush eyes with cool, clean, low-pressure

water while occasionally lifting and lowering the eyelids. Seek medical attention if excessive tearing,

redness or pain persists.

If the skin is exposed, remove all contaminated clothing. Wipe off excess material and wash exposed

skin with soap and water. Seek medical attention if skin appears damaged or if irritation persists.

Thoroughly clean contaminated clothing before reuse. Discard contaminated leather goods.

If ingested, do not induce vomiting or give anything to drink unless directed to by a physician. Never

give anything by mouth to a person who is not fully conscious. Seek medical attention immediately.

If inhaled, move the affected individual to fresh air. If the affected individual is not breathing,

immediately begin rescue breathing. If breathing is difficult, 100% humidified oxygen should be

administered by a qualified individual. Seek medical attention immediately and keep the affected

individual warm and at rest.

If ignited, use dry chemical, foam, carbon dioxide or water fog to extinguish.

WARNING! Do not modify the handbrake lever or attempt to replace the hydraulic fluid. If

damage occurs, follow the safety information in this section and contact your authorized

dealer for handbrake replacement. The hydraulic handbrake should only be serviced or

replaced by your authorized dealer.

WARNING! The handbrake contains hydraulic fluid that can cause mild skin, eye and

nasal/bronchial irritation. Do not attempt to adjust or service the handbrake without

proper protective equipment such as safety goggles and gloves and wash hands after

handling.

PMV Series 7

12a 12c

12b

2110

TILLER CONSOLE

The tiller console and lower tiller house all of the controls needed to drive your PMV, including the LCD

control panel, throttle control levers, key switch, and the throttle control lever switch. See figure 1.

PROHIBITED! Do not expose the tiller console to moisture. In the event that the tiller

console does become exposed to moisture, do not attempt to operate your PMV until the

tiller console has dried thoroughly.

II. YOUR PMV

Horn Buttons

These buttons activate a warning horn. Your

PMV must be powered up for the horn to be

operational. Do not hesitate to use the warning

horn when doing so may prevent accident or

injury.

Turn Signal Buttons

Press the appropriate turn signal button once

to activate it. The turn signal will flash on the

LCD screen.

Press the same signal button to turn it off.

NOTE: The turn signals are timed to shut off

after 15 seconds. A warning beep will sound as

long as the turn signal is on. See figure 3 for

volume control.

Lights Button

Press the lights button once to activate the

lighting system. The light symbol will be

shown on the LCD screen.

Press the lights button again to turn the

lighting system off.

WARNING! PMV users are

required to use their lights

when visibility is

restricted—day or night.

LCD Screen and control panel settings

The LCD control panel offers easily intuited

feedback information via the LCD screen. See

figure 1. The LCD screen is also used during

the set-up (activation) of the various control

panel settings.

Hazard Lights Button

This button activates the 4-way yellow flashers

on your PMV.

Press the button once to turn on the flashers.

Press the button again to turn off the flashers. Figure 1. LCD Control Panel

IDENTIFICATION KEY

1. HORN BUTTON 8. HI-LOW BUTTON

2. TURN SIGNAL BUTTONS 9. SPEED ADJUSTMENT

3. LIGHTS BUTTON (INCREASE)

4. LCD SCREEN 10.SPEED ADJUSTMENT

5. SET BUTTON (DECREASE)

6. HAZARD LIGHTS BUTTON 11.THROTTLE CONTROL

7. MODE BUTTON 12. HANDBRAKE

8PMV Series

II. YOUR PMV

NOTE: The 4-way flashers will flash and a warning beep will sound as long as the hazard lights are on.

See figure 3 for volume control.

Mode Button

Use the mode button to scroll between the odometer, tripometer, temperature, and clock.

High-Low Button

This button toggles the PMV’s speed between HIGH and LOW.

Press the High-Low button once to set the speed adjustment to high. The High-Low indicator will

display on the LCD screen. See figure 2. Using this setting in conjunction with the speed adjustment

buttons will allow the PMV to achieve speeds up to the maximum preprogrammed speed for the PMV.

Press the High-Low button again to set the speed adjustment to Low. The High-Low indicator will not

display on the LCD screen. Using this setting in conjunction with the speed adjustment buttons will

allow the PMV to achieve speeds up to the half the maximum preprogrammed speed for the PMV.

Speed Adjustment Buttons

These adjustment buttons enable you to pre-select and limit your PMV’s speed. This is indicated by the

maximum speed indicator on the LCD screen. See figure 2.

Press the image of the tortoise to decrease the speed of the PMV.

Press the image of the rabbit to increase the speed of the PMV.

NOTE: The more bars shown on the maximum speed indicator, the faster your pre-selected maximum

speed will be. See figure 2.

Throttle Control Levers

These levers allow you to control the forward speed and the reverse speed of your PMV up to the

maximum speed you preset with the speed adjustment buttons. A throttle control lever is located on the

underside of the left and right side of the tiller handle. See Figure 1.

To Move Forward:

Squeeze the rear part of the throttle control lever.

To Move Rearward:

Squeeze the front part of the throttle control lever.

Release the throttle control lever and allow your PMV to come to a complete stop before engaging the

other side of the lever. When the throttle control lever is completely released, it automatically returns to

the center “stop” position and engages your PMV’s brakes.

Handbrake Lever

This lever provides you with emergency stopping power. When in motion, release the throttle control lever

and gently squeeze the handbrake lever to come to a stop.

WARNING! The handbrake is intended for use as an emergency brake and/or parking

brake only.

To engage the parking brake, squeeze the handbrake lever, then press down on the top of the handbrake

mechanism. A red bar will indicate that the PMV parking brake is locked. See figure 1. Tap the handbrake

lever to release the parking brake when ready to resume movement.

PMV Series 9

14 7

1012 11 9 8

IDENTIFICATION KEY

1. BATTERY CONDITION INDICATOR 8. AM/PM

2. LIGHTS INDICATOR 9. CLOCK

3. SPEED/ERROR CODE/VOLUME 10. TEMPERATURE

4. HI-LOW INDICATOR 11. DISTANCE/TIME/TEMP/ERROR MESSAGE

5. UNIT INDICATOR 12. TRIPOMETER

6. MAXIMUM SPEED INDICATOR 13. ODOMETER

7. RIGHT TURN INDICATOR 14. LEFT TURN INDICATOR

LCD SCREEN AND CONTROL PANEL SETTINGS

The LCD control panel offers easily intuited feedback information via the LCD screen. See figure 2. The

LCD screen is also used during the set-up (activation) of the various control panel settings. See chart 1.

II. YOUR PMV

Figure 2. LCD Screen

10 PMV Series

ODO TRIP TEMP

OPERATION Press MODE PressMODE

for 2 seconds

then release

Press MODE Press MODE (hour digits flash)

SELECTION Use SET to

select option Press and

hold SET

until option

resets to 0.0

Use SET to

choose °F or

°C

Use SET to change hours. Alternate

pressing MODE and SET to change

minutes and AM/PM.

EXIT Press MODE Press MODE Press MODE Press

SETTING CODE INFORMATION

Odometer ODO Measures mph, km/h, and hours of use. Also displays

total distance traveled over life of PMV. (Cannot be

reset.)

Tripometer TRIP Displays trip distance traveled. (Can be reset to “0”.)

Temperature TEMP Displays current temperature in °F or °C.

Clock Displays time in 12-hour (AM/PM) or 24-hour.

SETTING INFORMATION CHART

II. YOUR PMV

Chart 2. LCD Control Panel Information

Battery Charging Mode

During battery charging, the console will display the clock and the battery condition indicator.

Battery Condition Indicator

When the key is turned to the “on” position, this LED indicator gives an approximate reading of battery

strength. When the PMV’s battery voltage reaches a low enough level, a warning beep will sound once,

indicating the batteries need charging. The warning beep will not sound again until the PMV is restarted

or the throttle control lever is pressed.

Maximum Speed Indicator LED

The maximum speed indicator displays the maximum speed selected with the speed adjustment buttons.

The more bars that are lit, the faster the speed. The maximum PMV speed will be determined by the HIGH-

LOW setting, which limits the maximum speed to half when set to LOW. The actual travel speed will be

shown in the speed display on the LCD screen.

Chart 1. LCD Control Panel Information

Press MODE until the setting you want to change appears on the LED screen. Press and hold SET then

follow the steps corresponding to your setting in chart 2.

Inhaltsverzeichnis

Sprachen:

Andere Pride Mobility Roller Handbücher

Pride Mobility

Pride Mobility Celebrrity XL Bedienungsanleitung

Pride Mobility

Pride Mobility Go-Go Elite Traveller SC40LR Bedienungsanleitung

Pride Mobility

Pride Mobility CELEBRITY X Bedienungsanleitung

Pride Mobility

Pride Mobility Path rider Bedienungsanleitung

Pride Mobility

Pride Mobility PMV5000 Bedienungsanleitung

Pride Mobility

Pride Mobility Legend 3-Wheel Scooter Bedienungsanleitung

Pride Mobility

Pride Mobility CELEBRITY XL Bedienungsanleitung

Pride Mobility

Pride Mobility Maxima Scooter SC940 Bedienungsanleitung

Pride Mobility

Pride Mobility TRAVEL SCOOTER Series Bedienungsanleitung

Pride Mobility

Pride Mobility VICTORY SERIES Bedienungsanleitung

Pride Mobility

Pride Mobility Go-Go Series Bedienungsanleitung

Pride Mobility

Pride Mobility Maxima Scooter SC940 Bedienungsanleitung

Pride Mobility

Pride Mobility Victory Economy Bedienungsanleitung

Pride Mobility

Pride Mobility Legend 3-Wheel Scooter Bedienungsanleitung

Pride Mobility

Pride Mobility Ranger Bedienungsanleitung

Pride Mobility

Pride Mobility SC3450 Bedienungsanleitung

Pride Mobility

Pride Mobility Legend SC3000 Bedienungsanleitung

Pride Mobility

Pride Mobility Jazzy Select gt Bedienungsanleitung

Pride Mobility

Pride Mobility Maxima Scooter SC940 Bedienungsanleitung

Pride Mobility

Pride Mobility Apex Sprint Bedienungsanleitung

Pride Mobility

Pride Mobility Mini Crosser Bedienungsanleitung

Pride Mobility

Pride Mobility Traveller Plus Bedienungsanleitung

Pride Mobility

Pride Mobility VICTORY SERIES Bedienungsanleitung

Pride Mobility

Pride Mobility Go-Go Bedienungsanleitung

Beliebte Roller Handbücher anderer Marken

TEKTRO

TEKTRO CHEETAH Bedienungsanleitung

Douglas

Douglas Vespa Sprint Installationsanleitung

PLAYTIVE

PLAYTIVE AS-2448 Bedienungsanleitung

Ebinger

Ebinger DONKEY XL Bedienungsanleitung

Flyer

Flyer Mountain Benutzerhandbuch

BackCountry eBikes

BackCountry eBikes Storm Bedienungsanleitung

equipmed

equipmed FreeRoam II Bedienungsanleitung

Yoto

Yoto Lion Bedienungsanleitung

WESTHILL BIKES

WESTHILL BIKES LINK Bedienungsanleitung

BAnff

BAnff eProdigy series Bedienungsanleitung

Winther

Winther 475 Bedienungsanleitung

Jetson

Jetson JBZL17 Bedienungsanleitung

First Choice Mobility

First Choice Mobility Roma Medical Corella S741 Bedienungsanleitung

Carrera

Carrera impel Bedienungsanleitung

Afikim

Afikim Superlight SL-3 Bedienungsanleitung

CareCo

CareCo ZOOM Bedienungsanleitung

Douglas

Douglas Vespa G.S. Bedienungsanleitung

Gazelle

Gazelle with BOSCH System Bedienungsanleitung