Pro-face FP2600-T41 Bedienungsanleitung
FP2600-T41
User Manual
Digital Electronics Corporation
FP2600-T41 User Manual i
It is forbidden to copy the contents of this manual, in whole or in part, except for the
user'spersonaluse,withouttheexpresspermissionoftheDigitalElectronicsCorpo-
rationofJapan.
2) Theinformationprovidedinthismanualissubjecttochangewithoutnotice.
3) Thismanualhasbeenwrittenwithcareandattentiontodetail; however,shouldyou
findanyerrorsoromissions,pleasecontactDigitalElectronicsandinformthemof
yourfindings.
4) PleasebeawarethatDigitalElectronicsisnotresponsibleforanydamages resulting
from the use of our products, regardless of article 3 above.
5) Specificationsset out inthis manual arefor overseas productsonly,and, as aresult,
somedifferencesmayexistbetweenthespecficationsgivenhereandtheJapanese
ones.
AllCompany/Manufacturernames usedinthismanualaretheregisteredtrademarksof
theirrespectivecompanies.
©2001,DigitalElectronicsCorporation
<Note>
Preface
Thankyouforpurchasing Digital’sTFTtypecolordisplaypanel,the 'FP2600-T41'
(hereafter referred to as the FP unit).
TheFPunitis a TFT type colorliquidcrystaldisplaymonitorfor IBM-PC compatible
personalcomputers(SVGAmode).
Pleaseread this manual completelytoinsure the correctuseand complete understand-
ingoftheFPunit'sfunctions. TheFP's analog interface is designed for use with
standard VGA mode. Please be aware that this unit may not be able to be connected
with nonstandard VGA modes. For more details, please refer to this manual's "PC
ConnectivityNotes"section.
The term FP2600-T41 refers to the following unit:
FP2600-T41-24V (AC 24V type)
ii FP2600-T41 User Manual
Other Symbols Used In This Manual
The list below describes the symbols used in this manual.
Explains a situation that requires a moderate amount of caution.
Indicates a word or phrase that has an additional explanation.
A reference point. Describes the word or phrase marked by the as-
terisk (*) and the corresponding number.
Reference pages on related topics.
Thismanual describes safetyinstructions for correctuse of theFP unit. Pleasekeep this
manual close at hand, and refer to it when necessary.
The following symbols are used throughout this manual to ensure the safe use of the FP
unit. Pleasemakesuretofollowallinstructionsgivensincetheyexplainimportantsafety
points.
For the Safe And Correct Use of this Unit:
*1
1),2) Operational steps. Please follow these numbered steps in order to
perform the desired operation.
This mark warns of a situation that could either seriously
injure a person or lead to death if the instruction is ignored
and/or the unit is used incorrectly.
This mark warns of a situation that could either injure a
person or damage property if the instruction is ignored and/
or the unit is used incorrectly.
Warning
Caution
FP2600-T41 User Manual iii
Safety Instructions
For the safe use of this unit, be sure to follow these guidelines:
Warning
Because of the ever present danger of electrical shock, be sure to unplug the power cable
fromtheFPunitbeforepluggingthecable'sotherendintothewall.
Donotusepowerinexcessoftheunit'sspecifiedvoltagerangesinceit may cause a fire or
electricshock.
Because the FP unit contains high voltage parts, an electric shock can occur when disas-
semblingtheunit. Therefore,pleasebesuretoalwaysunplugtheunitbeforedisassembling
it.
Donot modifythe FP unitin any way,since itmay cause afire or electricshock.
Whenchangingthebacklight,besuretoturnofftheunit'spowerfirst,inordertopreventan
electricshock.
Donotusetouchpanelkeystoperformlife-threateningorvitallyimportantsafetyfunctions.
Useseparatemechanicalswitches for such keys.
Ifsubstantialamountsofmetallicdust,waterorliquidsentertheFPunit,turnoffthepower
supplyimmediately,unplugthepowercord, and contactyourlocalFPdistributor.
WheninstallingtheFPunit,besuretofollowtheinstructionsgivenin“Chapter3.Installation
andWiring," toinsureitisdonecorrectly.
DonotusetheFPinanenvironmentwithflammablegas since it may causeanexplosion.
iv FP2600-T41 User Manual
Do not press the screen's touch surface too strongly with either your finger or a hard
object, since the touch surface may be damaged.
Whenthesurfaceof thedisplayscreenbecomesdirtyorsmudged, cleanthedisplaywith
acloth soaked ina neutraldetergent. Do notuse paint thinneror organic solvent.
Donot press onthetouch panel's face withsharp objects, such asamechanical pencil or
screwdriver,sinceitmightdamagetheLCD panel.
AvoidusingorstoringtheFPindirectsunlight,excessivelydustyordirtyenvironments,or
wherechemicals ortheir vapors arepresent in theair.
AvoidrestrictingtheFP'snaturalventilation,orstoringandusingtheFPinanenvironment
thatwillincreasetheFP'sinternaltemperature.
PleaseavoidusingtheFPinareaswheresudden,largechangesintemperaturemayoccur.
Thesechangescancausecondensationtoforminsidetheunit,possiblycausinganaccident.
TheFP'sLCDcontainsastrong irritant. IfthepanelisevercrackedandtheLCD'sliquid
contactsyourskin,besuretowashitwithrunningwaterforatleast15minutes. Ifanyof
thisliquidshouldenteryoureye,besuretoflushtheeyewithrunningwaterformorethan
15minutes,and see a doctorimmediately.
Thecurrentbrightnessofthe LCDscreenwilldependonthescreen's currentdisplayand
theLCD'scontrastadjustment.Anybrightnessvariations that resultarenormalforLCD
displays.
There are minute grid-points on the LCD surface. These points are not defects.
Sometimes crosstalk (shadows appearing on extended display lines) will appear on the
display. This phenomenon is a common attribute of LCD's and is not a defect.
Thedisplayedcolorwilllookdifferentwhenviewedfromanangleoutsidethespecified
viewangle.Thisisalsonormal.
Displaying a single screen image for long periods of time can cause an afterimage to
remain. To correct this, turn the unit OFF for 5 or 10 minutes, then ON again. This
phenomenonisacommonattributeoftheLCD's,andnotadefect. Topreventthiseffect,
youcan: - use the Display OFF feature, if the same image is to be displayed
for a long period of time.
-changethescreendisplayperiodicallytopreventthedisplayingofa
single image foralong period oftime.
Safety Instructions
For the correct use of this unit, please follow these guidelines:
Notes on the FP's Liquid Crystal Display (LCD)
Caution
FP2600-T41 User Manual v
Table of Contents
Preface ........................................................................................................................i
For the Safe and Correct Use of this Unit.................................................................. ii
Warning: Safety Instructions .......................................................................................iii
Caution: Safety Instructions ........................................................................................iv
Table of Contents ........................................................................................................ v
When Connecting to a PC...........................................................................................vii
FP2600-T41 Features..................................................................................................viii
Package Contents ....................................................................................................... ix
UL/c-UL (CSA) Application Notes ...........................................................................x
CE Marking Notes ......................................................................................................x
Chapter 1—Introduction
1-1 Connecting the FP to a PC ..................................................................................1-1
1-2 Optional Equipment ...............................................................................................1-2
Chapter 2—Specifications
2-1 General Specifications (For DC24V) ................................................................... 2-1
1 Electrical Specifications ..............................................................................................2-1
2 Environmental Specifications .....................................................................................2-1
3 Structural Specifications.............................................................................................2-2
2-2 Functional Specifications(For DC24V)................................................................. 2-3
2-3 Interface Specifications(For DC24V) .................................................................2-4
1 Analog RGB Interface .................................................................................................2-4
2 Serial Interface ............................................................................................................2-6
3 USB Interface ..............................................................................................................2-7
2-4 Cable Diagrams ...................................................................................................2-8
1 Pin Connections for the RGB Interface Cable............................................................2-8
2 Pin Connections for the SIO Interface Cable .............................................................2-9
3 Pin Connections for the USB Interface Cable ...........................................................2-9
2-5 Names and Functions of FP Parts.............................................................. 2-10
2-6 Flat Panel (FP) Dimensions........................................................................ 2-11
1 External Dimensions (DC24V) ................................................................... 2-11
2 Installation Brackets ........................................................................................... 2-12
3 FP Installation Dimensions ................................................................................. 2-12
vi FP2600-T41 User Manual
Chapter 3—Installation and Wiring
3-1 Installation .................................................................................................................3-1
3-2 Wiring ........................................................................................................................3-5
1 Power Cable Connection ................................................................................................... 3-5
2 Precaoutions: Connecting the Power Supply....................................................................3-6
3 Precautions: Grounding .....................................................................................................3-7
4 Precautions: Input/Output Signal Lines............................................................................ 3-7
3-3 Operation Mode Setup and Display Positioning .......................................................3-8
1 Operation Mode Setup and Adjustment ...............................................................3-8
2 Front LED Option Mode Display .....................................................................................3-9
3 Display Position Compensation by OSD.......................................................................... 3-10
Chapter 4—Touch Panel Commands
4-1 Command List..........................................................................................................4-1
4-2 Boot-upInitialization ................................................................................................4-2
4-3 Touch Interface Data ..............................................................................................4-3
4-4 Touch Panel Commands..........................................................................................4-5
Chapter 5—Troubleshooting
5-1 Troubleshooting........................................................................................................5-1
1 Possible Device Problems ................................................................................................ 5-1
2 No Display ........................................................................................................................ 5-2
3 Touch Panel Does Not Work ............................................................................................ 5-4
Chapter 6—Maintenance
6-1 Regular Cleaning .....................................................................................................6-1
1 Cleaning the Display ........................................................................................................ 6-1
2 Installation Gasket Check/Replacement ........................................................................... 6-1
6-2 Periodic Check Points .............................................................................................6-2
6-3 Replacing the Backlight ...........................................................................................6-3
INDEX.............................................................................................i - iv
FP2600-T41 User Manual vii
• With vertical 350 pixels, 400 pixels, including 50 pixels at the top and at the
bottom of the screen will be enlarged and displayed at 600 pixels (1.5 times).
SometypesofVGAequipmentmaynotbewithintherangesspecifiedabove,and,therefore,
cannot be connected to the FP.
Also, if the user changes his PC's VGA board, there is the possiblity that the new board
may not be able to be connected to the FP.
When Connecting to a PC
The FP unit's analog interface is designed for standard SVGA mode. The number of dots
(pixels)displayedareasfollows:
Size H Sync. V Sync. Dot Clock Range
800X600 35.156±1KHz 56±1Hz 36.000MHz±1%
800X600 37.879±1KHz 60±1Hz 40.000MHz±1%
640X480 31.469±1KHz 60±1Hz 25.175MHz±1%
640X480 35.000±1KHz 66±1Hz 30.240MHz±1%
640X480 37.861±1KHz 72±1Hz 31.500MHz±1%
640X400 24.827±1KHz 56±1Hz 21.053MHz±1%
640X400 31.469±1KHz 70±1Hz 25.175MHz±1%
640X350 31.469±1KHz 70±1Hz 25.175MHz±1%
720X400 31.469±1KHz 70±1Hz 28.322MHz±1%
720X350 31.469±1KHz 70±1Hz 28.322MHz±1%
viii FP2600-T41 User Manual
High Quality TFT Color LCD Display
Thisunitisequippedwitha12.1inchTFT type color LCD. Its superior brightness and
wideviewingangle,notfoundinordinarylaptoptypeTFTLCD's,widensyourscopeof
applications.
Thescreen's maximum resolutionis 800x 600 pixels,and can display260,000 colors.
Easy Installation In User’s Cabinets and Panels
The FP2600-T41's slim, lightweight, and compact design make installation a snap. It
was designed specifically for use as your IA (Industrial Automation) or OA (Office
Automation)systemmonitor. Theflat,frontpanelprovidesprotectionequivalenttothe
rigorousIP65Fstandard,and,evenwithoutitsoptionalprotectivecover,thefrontpanel
ishighlyresistanttoboth water and dust.
Panel can be used as a VGA Display
Since the FP2600-T41 is equipped with an analog RGB interface, it can be connected
to any PC with standard VGA/SVGA mode. (The PC's clock frequency, however,
mustbewithinthestandard range)
Easy to use Built In Touch Panel
TheFP2600-T41'sbuiltintouchpanelisstandardequipment,allowingtouchpaneldata
to be output to a host PC via input/output commands and an RS-232C cable and USB
cable.Thisisperfectforsystemsrequiringbothtouchpaneloperationanddatamonitoring.
FP2600-T41 Features
The features of the FP2600-T41 are as follows.
FP2600-T41 User Manual ix
The FP's packing box contains the items listed below. Please check to be sure each is
includedandisnotdamaged.
FP unit (FP2600-T41-24V)
FP2500/2600
User Manual (Contained in plastic case)
Installation Gasket (1) Installation Brackets (4)
FP2500-T41/FP2600-T41
Installation Guide (1)
Theseitemshaveall beencarefullypackedwithspecialattentionto productquality.
However, should you find anything damaged or missing, please contact your local
distributor immediately for prompt service.
Package Contents
User Manual
Installation
Guide
Inhaltsverzeichnis
Andere Pro-face Touchscreen Handbücher
Pro-face
Pro-face PL-6920 Series Bedienungsanleitung
Pro-face
Pro-face GP-2500 Series Bedienungsanleitung
Pro-face
Pro-face GP-377RT Bedienungsanleitung
Pro-face
Pro-face PS-4700 Series Bedienungsanleitung
Pro-face
Pro-face SP5000 Series Bedienungsanleitung
Pro-face
Pro-face PS-3650A Series Bedienungsanleitung
Pro-face
Pro-face PS-A Series Bedienungsanleitung
Pro-face
Pro-face GP4104G1D Bedienungsanleitung
Pro-face
Pro-face GP-2400 Series Bedienungsanleitung
Pro-face
Pro-face PS-G Bedienungsanleitung
Pro-face
Pro-face GP3000 Series Bedienungsanleitung
Pro-face
Pro-face PFXGP4401TADR Bedienungsanleitung
Pro-face
Pro-face GP377-LG Series Stücklistenhandbuch
Pro-face
Pro-face PS-3700A Bedienungsanleitung
Pro-face
Pro-face GP-3400 Series Bedienungsanleitung
Pro-face
Pro-face PL-6700 Series Bedienungsanleitung
Pro-face
Pro-face GP3000 Series Bedienungsanleitung
Pro-face
Pro-face PS300-BU00 Stücklistenhandbuch
Pro-face
Pro-face PS-3600G Series Bedienungsanleitung
Pro-face
Pro-face FP-3710K Series Bedienungsanleitung
Beliebte Touchscreen Handbücher anderer Marken
IBASE Technology
IBASE Technology ASTUT-152-RE1S Bedienungsanleitung
YASKAWA
YASKAWA TP 610C Bedienungsanleitung
B&R
B&R Power Panel C Series Bedienungsanleitung
Beijer Electronics
Beijer Electronics X2 control Bedienungsanleitung
AXIOMTEK
AXIOMTEK GOT321W-521 Bedienungsanleitung
TRIDONIC.ATCO
TRIDONIC.ATCO x-touchBOX Bedienungsanleitung
