Radio Shack ET-925 Bedienungsanleitung

Cat. No. 43-1095

OWNER’S MANUAL

Please read before using this equipment.

ET-925

900 MHz Dual Keypad

Cordless Speakerphone

43-1095.fm Page 1 Tuesday, August 17, 1999 3:37 PM

FEATURES

COM-LOK and RadioShack are registered trademarks used by Tandy Corporation.

Your RadioShack ET-925 900 MHz

Dual Keypad Cordless Speakerphone

uses the 900 MHz band which means

less interference, clearer sound, and

greater range than 46/49 MHz cord-

less telephones.

And, its headset jack means you can

connect an optional headset for hands-

free convenience while you use the

ET-925.

Its features include:

900 MHz Operation — provides long-

er range and less interference than

many other cordless phones.

Speakerphone — lets you make or

answer calls without using the handset

or a headset.

Dual Ke

pads — a full set of keys on

both the ET-925’s handset and base

let you use either keypad to make and

answer calls or program the phone’s

features.

40 Channels — automatically selects

a clear channel when you make or an-

swer a call. You can also manually

change channels during a call.

Super CCT Noise-Reduction Cir-

cuitr

— provides clear telephone

conversations, giving you sound clarity

comparable to that of a corded phone.

Securit

Access-Protection Code —

automatically prevents other cordless

phone users from using your phone

line while the handset is off the base.

COM-LOK®— ensures that other

cordless phone users cannot use your

phone line when the handset is on the

base.

Redial — lets you quickly redial the

last number dialed.

20-Number Memor

Dialin

— lets

you store up to 20 numbers in memory

— 10 on the handset and 10 on the

base — for easy dialing.

— lets you send a paging sig-

nal from the base to the handset to

page someone or locate the handset if

you misplace it.

Flash — sends an electronic switch-

hook signal for use with special phone

services, such as Call Waiting.

Volume Control — lets you adjust

the volume you hear through the

handset.

Pro

rammable Rin

er — lets you

select from four ringer tone/volume

settings.

Tone/Pulse Dialin

— lets you use

your phone with either type of service.

43-1095.fm Page 2 Tuesday, August 17, 1999 3:37 PM

Auto Talk — you can answer a call by

just lifting the handset from the base.

Hearing-Aid Compatibility — lets

you use your phone with hearing aids

that have a T (telephone) switch.

This telephone has been tested and

found to comply with all applicable UL

and FCC standards.

Important Note: Cordless phones

such as this one require AC power to

operate. When the AC power is off,

you cannot dial out or receive incoming

calls using your ET-925. To be safe,

you should also have a phone that

does not need AC power to operate

(not a cordless phone) so you can still

make and receive calls if there is an

AC power failure.

We recommend you record your

phone’s serial number here. The num-

ber is on the bottom of the base.

Serial Number __________________

This symbol is intended to alert you

to the presence of uninsulated dan-

gerous voltage within the product’s

enclosure that might be of sufficient

magnitude to constitute a risk of

electric shock. Do not open the

product’s case.

This symbol is intended to inform

you that important operating and

maintenance instructions are in-

cluded in the literature accompany-

ing this product.

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER OR BACK. NO USER-SERVICE-

ABLE PARTS INSIDE. REFER SERVIC-

ING TO QUALIFIED PERSONNEL.

Warning: To reduce the risk of fire

or shock hazard, do not expose

this product to rain or moisture.

CAUTION

43-1095.fm Page 3 Tuesday, August 17, 1999 3:37 PM

READ THIS BEFORE

INSTALLATION

Each device that you connect to the

phone line drawspower from the phone

line. We refer to this power draw as the

device’s

ringer equivalence number

, or

REN. The REN is on the bottom of the

base.

If you are using more than one phoneor

other device on the line, add up all the

RENs. If the total is more than five, your

phones might not ring. In rural areas, a

total REN of three might impair ringer

operation. If ringer operation is im-

paired, remove a device from the line.

FCC STATEMENT

This telephone complies with Part 68 of

FCC Rules

. You must, upon request,

provide the FCC Registration Number

and the REN to your phone company.

These numbers are on the bottom of

the base.

Note: You must not connect your

phone to any of the following:

• coin-operated systems

• party-line systems

• most electronic key phone sys-

tems

43-1095.fm Page 4 Tuesday, August 17, 1999 3:37 PM

CONTENTS

Installation ............................................................................................................... 6

Selecting a Location ........................................................................................... 6

Placing the Base on a Desk Top .................................................................. 6

Mounting the Base on a Wall Plate .............................................................. 7

Mounting the Base Directly on the Wall ....................................................... 8

Connecting and Charging the Battery Pack ..................................................... 10

Setting the Dialing Mode .................................................................................. 11

Setting the Ringer ............................................................................................ 12

On the Handset ......................................................................................... 12

On the Base ............................................................................................... 12

Using a Headset ............................................................................................... 12

Operation ............................................................................................................... 14

Making and Receiving Calls ............................................................................. 14

Using the Handset ..................................................................................... 14

Using the Speakerphone ........................................................................... 14

Switching Between the Handset and Speakerphone ................................ 15

Using Both the Handset and Speakerphone ............................................. 15

Changing the Channel ............................................................................... 15

Using Mute ....................................................................................................... 15

Using Redial ..................................................................................................... 16

Using Flash ...................................................................................................... 16

Using Tone Services on a Pulse Line ............................................................... 16

Paging .............................................................................................................. 17

Memory Dialing ................................................................................................ 17

Storing a Number in Memory ..................................................................... 17

Entering a Pause ....................................................................................... 18

Dialing a Memory Number ......................................................................... 19

Chain-Dialing Service Numbers ................................................................. 19

Testing Stored Emergency Numbers ......................................................... 19

Troubleshootin

................................................................................................... 20

Care and Maintenance ......................................................................................... 22

Replacing the Battery Pack .............................................................................. 23

The FCC Wants You to Know .......................................................................... 24

Lightning ........................................................................................................... 24

43-1095.fm Page 5 Tuesday, August 17, 1999 3:37 PM

INSTALLATION

SELECTING A

LOCATION

You can place the ET-925’s base on a

desk top or table, or mount it on a wall.

Select a location that is:

• near an AC outlet

• near a telephone line jack

• out of the way of normal activities

• away from electrical machinery,

electrical appliances, metal walls

or filing cabinets, wireless inter-

coms, alarms, and room monitors

• away from other cordless phones

The base’s location affects the hand-

set’s range. If you have a choice of

several locations, try each to see

which provides the best performance.

Caution: The supplied RadioShack

AC adapter was designed specifically

for your ET-925. Use only the supplied

adapter.

Notes:

• Your telephone connects directly

to a modular telephone line jack. If

your phone line jack is not a mod-

ular jack, you can update the wir-

ing yourself, using jacks and

adapters available at your local

RadioShack store. Or, you can let

the phone company update the

wiring for you.

• The USOC number of the jack to

be installed is RJ11C (RJ11W if

you want to mount it on a wall

plate).

Placing the Base on a

Desk Top

Follow these steps when you place the

base on a desk, shelf, or table.

1. Plug one end of the supplied long

modular cord into the TEL LINE

jack on the back of the base.

2. Plug the modular cord’s other end

into a modular phone line jack.

3. Insert the supplied AC adapter’s

barrel plug into the DC IN 9V jack

on the back of the base.

43-1095.fm Page 6 Tuesday, August 17, 1999 3:37 PM

4. Route the adapter’s cord through

the strain relief slot on the base.

5. Plug the adapter into a standard

AC outlet. The POWER indicator

on the base lights.

6. Lift the base’s antenna to a verti-

cal position.

Mounting the Base on a

Wall Plate

1. Plug one end of the supplied short

modular cord into the TEL LINE

jack on the back of the base.

Strain Relief

Slot

2. Route the modular cord through

the upper groove on the bottom of

the base.

3. Insert the supplied AC adapter’s

barrel plug into the DC IN 9V jack

on the back of the base.

4. Route the adapter’s cord through

the right side of the strain relief

slot on top of the base and

through both the upper and lower

grooves on the bottom of the

base.

Upper

Groove

Strain Relief

Slot

Upper

Groove

Lower

Groove

43-1095.fm Page 7 Tuesday, August 17, 1999 3:37 PM

5. Plug the short modular cord into

the wall plate jack, press the ex-

cess cord into the slot in the cen-

ter of the base, then align the

base’s keyhole slots with the wall

plate studs and slide the base

downward to secure it.

6. Press and lift out the handset

holder, turn it over and rotate it

180°, then snap it back into place

so it holds the handset.

7. Plug the adapter into a standard

AC outlet. The POWER indicator

on the base lights.

8. Lift the base’s antenna to a verti-

cal position.

Slot for

Excess

Cord

Mounting the Base Directly

on the Wall

For this mounting method, you need

two flat-head wood screws (not sup-

plied) with heads that fit into the key-

hole slots on the bottom of the base.

1. Drill two holes 35/16

inches apart. Then

thread a screw into

each hole, letting the

heads extend about

3/16 inch from the

wall.

2. Plug one end of the supplied long

modular cord into the TEL LINE

jack on the back of the base.

3. Route the modular cord through

the upper and lower grooves on

the bottom of the base.

3/16

35/16

Upper

Groove

Lower

Groove

43-1095.fm Page 8 Tuesday, August 17, 1999 3:37 PM

4. Insert the supplied AC adapter’s

barrel plug into the DC IN 9V jack

on the back of the base.

5. Route the adapter’s cord through

the right side of the strain relief

slot on top of the base and

through both the upper and lower

grooves on the bottom of the

base.

6. Align the keyhole slots with the

mounting screws and slide the

base downward to secure it.

Strain Relief

Slot

Upper

Groove

Lower

Groove

7. Plug the modular cord into a mod-

ular phone line jack.

8. Press and lift out the handset

holder, rotate it 180°, then snap it

back into place so it holds the

handset.

9. Plug the adapter into a standard

AC outlet. The POWER indicator

on the base lights.

10. Lift the base’s antenna to a verti-

cal position.

43-1095.fm Page 9 Tuesday, August 17, 1999 3:37 PM

CONNECTING AND

CHARGING THE

BATTERY PACK

The ET-925 comes with a recharge-

able nickel-cadmium battery pack in

the handset. Before using your phone,

you must connect the battery pack and

then charge it for about 14 hours.

1. Remove the screw on the battery

compartment cover, then press

down and slide the cover in the di-

rection of the arrow to remove it.

2. Plug the battery pack’s connector

into the socket in the compart-

ment. The connector fits only one

way.

3. Replace the cover, then reinsert

and tighten the screw.

To charge the battery pack, simply

place the handset on the base.

The CHARGE indicator on the base

lights.

Recharge the battery pack when the

handset beeps and the TALK/BATT

LOW indicator flashes during a call.

Notes:

• If the CHARGE indicator does not

light when you place the handset

on the base, be sure the battery

pack and AC adapter are correctly

and securely connected. Be sure

the charging contacts on the

handset and the base are making

contact.

Also, check the charging contacts

on the handset and the base. If

the contacts are dirty or tarnished,

clean them with a pencil eraser.

CHARGE Indicator

43-1095.fm Page 10 Tuesday, August 17, 1999 3:37 PM

Inhaltsverzeichnis

Andere Radio Shack Schnurloses Telefon Handbücher

Radio Shack

Radio Shack Wireless Phone Jack System Bedienungsanleitung

Radio Shack

Radio Shack ET-687 Bedienungsanleitung

Radio Shack

Radio Shack 43-3577 Bedienungsanleitung

Radio Shack

Radio Shack Presidian Bedienungsanleitung

Radio Shack

Radio Shack 43-3856 Bedienungsanleitung

Radio Shack

Radio Shack ET-532 Bedienungsanleitung

Radio Shack

Radio Shack ET-1111 Bedienungsanleitung

Radio Shack

Radio Shack 2-Line 900 MHz Handsfree Cordless Phone Bedienungsanleitung

Radio Shack

Radio Shack 900 MHz Digital Spread Spectrum Cordless... Bedienungsanleitung

Radio Shack

Radio Shack 43-1088 Bedienungsanleitung

Radio Shack

Radio Shack 43-141 Bedienungsanleitung

Radio Shack

Radio Shack ET-1125 Bedienungsanleitung

Radio Shack

Radio Shack 43-3535 Bedienungsanleitung

Radio Shack

Radio Shack 43-142 Bedienungsanleitung

Radio Shack

Radio Shack ET-3504 Bedienungsanleitung

Radio Shack

Radio Shack 43-5560 Bedienungsanleitung

Radio Shack

Radio Shack 43-3856 Bedienungsanleitung

Radio Shack

Radio Shack 2.4 GHz Digital Spread Spectrum Cordless Telephone with Call Waiting/Caller... Bedienungsanleitung

Radio Shack

Radio Shack 43-683 Bedienungsanleitung

Radio Shack

Radio Shack ET-685 Bedienungsanleitung

Radio Shack

Radio Shack 2.4 GHz Digital Spread Spectrum Cordless Telephone with Caller ID/Call... Bedienungsanleitung

Radio Shack

Radio Shack ET-547 Bedienungsanleitung

Radio Shack

Radio Shack 43-1122 Bedienungsanleitung

Radio Shack

Radio Shack Caller ID System 1500 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung