Radio Shack ET-537 Bedienungsanleitung

Cat. No. 43-1037

OWNER’S MANUAL

Please read before using this equipment.

ET-537

25-Channel Cordless Telephone

with 9-Number Memory

43-1037.fm Page 1 Tuesday, August 17, 1999 10:05 AM

FEATURES

COM-LOK is a registered trademark used by Tandy Corporation.

RadioShack is a trademark used by Tandy Corporation.

Your RadioShack ET-537 25-Channel

Cordless Telephone with 9-Number

Memory includes the latest advances

in cordless phone technology. It has

these features:

Auto Scan — automatically selects a

clear channel when you make or an-

swer a call.

25-Channel Selector — during a call,

lets you easily select the channel with

the best performance.

Advanced Super CCT Circuitr

—

provides clarity comparable to a cord-

ed phone, reduces background noise,

and increases effective operating dis-

tance.

9-Number Memor

— lets you store

nine phone numbers in memory for

easy dialing.

COM-LOK®— ensures that other

cordless phone users cannot use your

phone line while the handset is on the

base.

Automatic Securit

Access Protec-

tion Code — changes each time you

return the handset to the base to help

prevent other cordless phone users

from using your phone line while the

handset is off the base.

Flash — sends an electronic switch-

hook signal for use with special phone

services such as call waiting.

Redial — quickly redials the last num-

ber dialed, with the touch of a button.

Touch Tone or Pulse (Rotar

) Dial-

— lets you connect your phone to

either type of service.

e — lets you send a page from the

base to the handset so you can find it

if you misplace it or soyou can alert the

person using the handset.

Rin

er On/Off Switch — saves hand-

set battery power.

Hearin

-Aid Compatibilit

— lets

you use your phone with hearing aids

that have a T (telephone) switch.

For your records, we urge you to

record the serial number of your phone

in the space below. The serial number

is located on the bottom panel of the

base.

Serial Number:__________________

Please read this owner’s manual care-

fully so you can enjoy all of your tele-

phone’s features.

This telephone has been tested and

found to comply with all applicable

FCC and UL standards.

43-1037.fm Page 2 Tuesday, August 17, 1999 10:05 AM

Important: Cordless phones such as

this one require AC power to operate.

When AC power is off, you cannot dial

out or receive incoming calls using

your ET-537. For this reason, the ET-

537 should not be your only telephone.

To be safe, you should also have a

phone that does not need AC power to

operate (not a cordless phone) so you

can still make and receive calls if there

is an AC power failure.

Warning: To prevent fire or shock haz-

ard, do not expose this product to rain

or moisture.

This symbol is intended to alert you

to the presence of uninsulated dan-

gerous voltage within the product’s

enclosure that might be of sufficient

magnitude to constitute a risk of

electric shock. Do not open the

product’s case.

This symbol is intended to inform

you that important operating and

maintenance instructions are in-

cluded in the literature accompany-

ing this product.

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER OR BACK. NO USER-SERVICE-

ABLE PARTS INSIDE. REFER SERVIC-

ING TO QUALIFIED PERSONNEL.

CAUTION

43-1037.fm Page 3 Tuesday, August 17, 1999 10:05 AM

READ THIS BEFORE

INSTALLATION

We have designed your telephone to

conform to federal regulations, and

you can connect it to most telephone

lines. However, each device that you

connect to the phone line draws power

from the phone line. We refer to this

power draw as the device’s ringer

equivalence number, or REN. The

REN is on the bottom of the base.

If you are using more than one phone

or other device on the line, add up all

the RENs. If the total is more than five,

your phone might not ring. In rural ar-

eas, a total REN of three might impair

ringer operation. If ringer operation is

impaired, disconnect one of the devic-

es from the line.

Note: Some cordless phones operate

at frequencies that might cause inter-

ference to nearby TVs and VCRs. To

minimize or prevent such interference,

the base of the cordless phone should

not be placed near or on top of a TV or

VCR.

FCC STATEMENT

This telephone complies with Part 68

FCC Rules

. You must, upon re-

quest, provide the FCC Registration

Number and the REN to your phone

company. These numbers are on the

bottom of the phone’s base.

You must not connect your phone to

any of the following:

• Coin-operated systems

• Party-line systems

• Most electronic key phone sys-

tems

Note: Your telephone operates on

standard radio frequencies, as allocat-

ed by the FCC. Even though the ac-

cess-protection code prevents un-

authorized use of your phone line, it is

possible for other radio units operating

on similar frequencies within a certain

area to unintentionally intercept your

conversations and/or cause interfer-

ence. This lack of privacy can occur

with any cordless phone.

43-1037.fm Page 4 Tuesday, August 17, 1999 10:05 AM

CONTENTS

Installation..............................................................................................................6

Selecting a Location..........................................................................................6

Installing the Handset’s Antenna.......................................................................7

Connecting the Battery .....................................................................................7

Connecting Power.............................................................................................7

Charging the Battery.........................................................................................8

Installing the Base.............................................................................................9

Placing the Base on a Desk Top.................................................................9

Mounting the Base on a Wall Plate.............................................................9

Mounting the Base Directly on the Wall....................................................10

Preparation...........................................................................................................12

Setting the Dialing Mode.................................................................................12

Turning the Ringer On or Off...........................................................................12

Operation .............................................................................................................13

Confirmation Tones.........................................................................................13

Making/Receiving a Call ................................................................................13

Changing Channels ........................................................................................13

Using Redial ...................................................................................................13

Using Flash ....................................................................................................14

Using Tone Services on a Pulse Line .............................................................14

Using Privacy .................................................................................................14

Using Page ....................................................................................................15

Memor

Dialin

...................................................................................................16

Storing Phone Numbers in Memory ...............................................................16

Storing a Pause .......................................................................................16

Dialing a Stored Number ................................................................................17

Clearing a Memory Location...........................................................................17

Chain Dialing Numbers ..................................................................................17

Troubleshootin

.................................................................................................18

Care and Maintenance .......................................................................................20

Replacing the Battery .....................................................................................21

The FCC Wants You to Know ........................................................................21

Lightning .........................................................................................................22

43-1037.fm Page 5 Tuesday, August 17, 1999 10:05 AM

INSTALLATION

Important: After you select a location

for the phone (see “Selecting a Loca-

tion”), you must install the phone in the

following order before you use it for the

first time.

1. Install the handset’s antenna (see

“Installing the Handset’s An-

tenna” on Page 7).

2. Connect the battery to the hand-

set (see “Connecting the Battery”

on Page 7).

3. Connect the base to power (see

“Connecting Power” on Page 7).

4. Charge the phone’s battery for

about 24 hours (see “Charging

the Battery” on Page 8).

5. Install the base and connect it to

your phone line (see “Installing the

Base” on Page 9).

SELECTING A LOCATION

You can place your phone on a desk,

shelf, or table, or mount it on a wall.

Select a location that is:

• Near an AC outlet

• Near a telephone line jack

• Out of the way of normal activities

• Away from fluorescent lights, elec-

trical machinery, electrical appli-

ances, and metal walls or filing

cabinets

• Away from computers, remote

control toys, wireless intercoms,

alarms, and room monitors

The base’s location affects the phone’s

range. If you have a choice of several

locations, try each to see which pro-

vides the best performance.

Notes:

• If the phone line jack is not a mod-

ular jack, you must update the wir-

ing. You can do this yourself,

using jacks and adapters avail-

able at your local RadioShack

store, or you can let the phone

company update the wiring for

you.

• The phone company will charge

you for the installation of the nec-

essary jacks.

• The USOC number of the jack to

be installed is RJ11W for a wall

jack or RJ11C for a wall plate.

43-1037.fm Page 6 Tuesday, August 17, 1999 10:05 AM

INSTALLING THE

HANDSET’S ANTENNA

Insert the antenna into the hole at the

top of the handset, then rotate the an-

tenna clockwise until it is secure.

CONNECTING THE

BATTERY

Your phone comes with a recharge-

able nickel-cadmium battery installed.

However, before you use the phone for

the first time, you must connect the

battery and charge it for about 24

hours.

Follow these steps to connect the bat-

tery.

1. While lifting up on the battery

compartment cover’s latch on the

back of the handset, pull the cover

up to remove it.

2. Pull and lift the front tab on the

battery restraining strap to remove

it.

3. Connect the battery’s wires to the

battery connector inside the com-

partment, then insert the battery.

Note: The battery’s connector fits

into the connector inside the com-

partment only one way. Do not

force it.

4. Replace the battery restraining

strap and the cover.

After you connect the battery, you

must connect power, then charge the

battery.

CONNECTING POWER

Caution: You must use a 120V AC/9V

DC adapter that delivers at least 150

milliamps. Its plug must correctly fit the

phone’s POWER 9V DC jack. The sup-

plied adapter meets these require-

ments. Using an adapter that does not

meet these requirements could dam-

age the phone or the adapter.

43-1037.fm Page 7 Tuesday, August 17, 1999 10:05 AM

1. Insert the supplied AC adapter’s

barrel plug into the POWER 9V DC

jack on the back of the base.

2. Plug the adapter into a standard

AC outlet.

CHARGING THE

BATTERY

Before you connect the phone to the

phone line and use the phone for the

first time, or whenever you install a

new battery, make sure RINGER OFF/

ON on the handset is set to OFF, then

charge the battery for about 24 hours

by placing the handset on the cradle so

the CHARGE indicator on the base

lights.

The phone charges whenever the

handset is on the base. You can re-

charge the battery at any time, but you

must be sure to recharge it when the

handset sounds a beep every 7 sec-

onds.

Notes:

• If the CHARGE indicator on the

base does not light when you

place the handset on the cradle,

be sure the AC adapter is

securely connected to the base.

Also, check the charging contacts

on the handset and base. If the

contacts are dirty or tarnished,

gently clean them with a pencil

eraser.

• A full charge lasts about 168

hours if you leave the handset off

the base and do not make any

calls.

• About once a month, fully dis-

charge the battery. Otherwise, the

battery loses its ability to fully

recharge. To fully discharge the

battery, set RINGER OFF/ON on

the handset to ON and keep the

handset off the cradle until the

handset beeps every 7 seconds.

Then return the handset to the

cradle, set RINGER OFF/ON to

OFF, and recharge the battery for

about 10 hours.

• When the battery cannot fully

recharge, replace it with a new

one. For the best performance,

you should replace the supplied

battery about once a year — more

often if it is used heavily. See

“Replacing the Battery’’ on

Page 21.

43-1037.fm Page 8 Tuesday, August 17, 1999 10:05 AM

• The first time you use your phone

after installing a new battery, the

handset might not work or might

sound an error tone when you

press

TALK. This might also occur

when you recharge a battery that

has been completely discharged.

If this happens, be sure RINGER

OFF/ON is set to ON. Then return

the handset to the cradle for 5

seconds. This resets the security

access protection code.

INSTALLING THE BASE

Placing the Base on

a Desk Top

Follow these steps if you are placing

the base on a desk, shelf, or table.

1. Place the handset on the base.

2. Place the base’s antenna in a ver-

tical position.

3. Plug the attached modular cord

on the back of the base into a

modular phone line jack.

Mounting the Base on

a Wall Plate

Follow these steps to mount the phone

on a standard wall plate.

1. Thread the attached modular cord

through the thick strain relief slot

under the base.

2. Thread the supplied AC adapter’s

cord through the thin strain relief

slot under the base.

3. Plug the attached modular cord

on the back of the base into the

wall plate’s modular phone line

jack.

43-1037.fm Page 9 Tuesday, August 17, 1999 10:05 AM

4. Align the keyhole slots on the

back of the base with the mount-

ing studs on the wall plate, then

carefully push the base onto the

studs and slide it down.

5. Place the handset on the base.

6. Place the base’s antenna in a ver-

tical position.

Mounting the Base

Directly on the Wall

You need two wood screws (not sup-

plied) for this mounting method. Make

sure the heads of the screws fit into the

keyhole slots on the back of the base.

Follow these steps to mount the phone

directly on the wall.

1. Drill two holes 31/4inches apart.

Then thread a screw into each

hole, letting the head extend 1/8

inch from the wall.

2. Thread the attached modular cord

through the thick strain relief slot

under the base.

3. Thread the supplied AC adapter’s

cord through the thin strain relief

slot under the base.

4. Align the keyhole slots on the

back of the base with the mount-

ing screws and slide the base

downward to secure it.

43-1037.fm Page 10 Tuesday, August 17, 1999 10:05 AM

Inhaltsverzeichnis

Andere Radio Shack Schnurloses Telefon Handbücher

Radio Shack

Radio Shack Presidian Bedienungsanleitung

Radio Shack

Radio Shack 43-3580 Bedienungsanleitung

Radio Shack

Radio Shack 43-3823 Bedienungsanleitung

Radio Shack

Radio Shack 900 MHz Digital Spread Spectrum Cordless Phone with Dual Caller... Bedienungsanleitung

Radio Shack

Radio Shack ET-557 Bedienungsanleitung

Radio Shack

Radio Shack 43-3704 Bedienungsanleitung

Radio Shack

Radio Shack 43-683 Bedienungsanleitung

Radio Shack

Radio Shack ET-1118 Bedienungsanleitung

Radio Shack

Radio Shack 43-3812 Bedienungsanleitung

Radio Shack

Radio Shack 900 MHz Digital Spread Spectrum Cordless... Bedienungsanleitung

Radio Shack

Radio Shack 2.4 GHz Digital Spread Spectrum Cordless Telephone with Caller ID/Call... Bedienungsanleitung

Radio Shack

Radio Shack 43-164 Bedienungsanleitung

Radio Shack

Radio Shack 43-3815/43-3898 Bedienungsanleitung

Radio Shack

Radio Shack 43-141 Bedienungsanleitung

Radio Shack

Radio Shack ET-686 Bedienungsanleitung

Radio Shack

Radio Shack RT-551 Bedienungsanleitung

Radio Shack

Radio Shack ET-542 Bedienungsanleitung

Radio Shack

Radio Shack 43-1088 Bedienungsanleitung

Radio Shack

Radio Shack ET-908 Bedienungsanleitung

Radio Shack

Radio Shack ET-547 Bedienungsanleitung

Radio Shack

Radio Shack 43-3820 Bedienungsanleitung

Radio Shack

Radio Shack ET-539 Bedienungsanleitung

Radio Shack

Radio Shack TAD-1016 Bedienungsanleitung

Radio Shack

Radio Shack 43-3821 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung