Radio Shack Digital Spread Spectrum Cordless Telephone with Digital Answering... Bedienungsanleitung

Owner’s Manual

Please read before using this equipment.

Digital Spread Spectrum

Cordless Telephone

with Digital Answering System

43-3805.fm Page 1 Wednesday, May 17, 2000 3:48 PM

Contents

Features .................................................................................................................................. 6

Installation .............................................................................................................................. 8

Mounting the Phone .......................................................................................................... 8

On a Desk Top ........................................................................................................... 8

On a Wall Plate or Wall .............................................................................................. 9

Connecting and Charging the Battery Pack .................................................................... 10

Setting the Dialing Mode ................................................................................................. 11

Turning the Base’s Ringer On and Off ............................................................................ 11

Setting the Number of Rings ........................................................................................... 12

A Quick Look at the Handset .......................................................................................... 12

Setting the Ringer’s Tone and Volume ............................................................................ 12

Setting the Day/Time ....................................................................................................... 12

Operation .............................................................................................................................. 13

Making and Receiving Calls ............................................................................................ 13

Selecting the Channel ..................................................................................................... 13

Setting the Handset Volume ............................................................................................ 13

Answering Calls Using the Speakerphone ...................................................................... 13

Switching Between the Handset and Speakerphone ...................................................... 13

Using Both the Handset and Speakerphone ................................................................... 14

Using Tone Services on a Pulse Line .............................................................................. 14

Using Redial .................................................................................................................... 14

Using Mute ...................................................................................................................... 14

Using Flash ..................................................................................................................... 14

Paging ............................................................................................................................. 14

Memory Dialing ............................................................................................................... 15

Storing a Number in Memory ................................................................................... 15

Entering a Pause ..................................................................................................... 15

Dialing a Memory Number ....................................................................................... 15

Chain-Dialing Service Numbers ............................................................................... 15

Testing Stored Emergency Numbers ....................................................................... 16

Using a Headset .............................................................................................................. 16

Answering System Operation ............................................................................................. 16

Selecting the Outgoing Message .................................................................................... 16

Recording/Deleting an Outgoing Message ..................................................................... 17

Setting the Record Time ................................................................................................. 17

Setting the Answering System to Answer Calls .............................................................. 17

Screening Calls ............................................................................................................... 17

Recording Incoming Messages ....................................................................................... 17

Recording a Memo .......................................................................................................... 18

Recording a Conversation ............................................................................................... 18

Playing Messages ........................................................................................................... 18

RadioShack and RadioShack.com are trademarks used by Tandy Corporation.

43-3805.fm Page 2 Wednesday, May 17, 2000 3:48 PM

Adjusting the Answering System’s Volume .................................................................... 18

Deleting Messages ......................................................................................................... 18

Setting the Remote Operation PIN ................................................................................. 19

Remote Operation .......................................................................................................... 19

Using the Toll-Saver ....................................................................................................... 19

Using Remote Commands ............................................................................................. 19

Remote Commands ................................................................................................ 20

Troubleshooting ................................................................................................................... 21

Care ................................................................................................................................ 22

IMPORTANT

Cordless phones such as this one require

AC power to operate. When the AC power is

off, you cannot dial out or receive incoming

calls using your phone. To be safe, you

should also have a phone that does not need

AC power to operate (not a cordless phone)

so you can still make and receive calls if

there is an AC power failure.

When AC power is lost, the phone loses the

security access-protection code connection

between the base and the handset. When

power is restored, put the handset on the

base briefly to restore this connection so you

can use the handset.

READ THIS BEFORE

INSTALLATION

We have designed your phone to conform to

federal regulations and you can connect it to

most phone lines. However, each device that

you connect to the telephone line draws

power from the line. We refer to this power

draw as the phone’s ringer equivalence num-

ber, or REN. The REN is on the bottom of

your phone.

If you use more than one phone or other de-

vice on the line, add up all the RENs. If the

total is more than five (three in rural areas),

your phones might not ring. If ringer opera-

tion is impaired, remove one of the devices

from the line.

This telephone has been tested and found to

comply with all applicable UL and FCC stan-

dards.

WARNING: To reduce the risk of fire or

shock hazard, do not expose this product to rain

or moisture.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER OR BACK. NO USER-SERVICE-

ABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED PERSONNEL.

This symbol is intended to alert

you to the presence of uninsu-

lated dangerous voltage within

the product’s enclosure that might

be of sufficient magnitude to con-

stitute a risk of electric shock. Do

not open the product’s case.

This symbol is intended to inform

you that important operating and

maintenance instructions are

included in the literature accom-

panying this product.

43-3805.fm Page 3 Wednesday, May 17, 2000 3:48 PM

FCC STATEMENT

Your telephone complies with Part 68 of

FCC

Rules

. Upon request, you must provide the

phone’s FCC registration number and REN

to your telephone company. These numbers

are on the bottom of the base.

Note: You must not connect your telephone

to:

• coin-operated systems

• party-line systems

• most electronic key phone systems

THE FCC WANTS YOU TO

KNOW

In the unlikely event that your phone causes

problems on the phone line, the phone com-

pany can temporarily discontinue your ser-

vice. If this happens, the phone company

attempts to notify you in advance. If advance

notice is not practical, the phone company

notifies you as soon as possible and advises

you of your right to file a complaint with the

FCC.

Also, the phone company can make changes

to its lines, equipment, operations, or proce-

dures that could affect the operation of this

telephone. The telephone company notifies

you of these changes in advance, so you can

take the necessary steps to prevent interrup-

tion of your telephone service.

Your phone might cause TV or radio interfer-

ence even when it is operating properly. To

determine whether your phone is causing the

interference, turn off your phone. If the inter-

ference goes away, your phone is causing it.

Try to eliminate the interference by:

• moving your phone away from the

receiver

• connecting your phone to an AC outlet

that is on a different electrical circuit

from the receiver

• contacting your local RadioShack store

for help

If you cannot eliminate the interference, the

FCC requires that you stop using your

phone.

Some cordless telephones operate on fre-

quencies that might cause interference to

nearby TVs and VCRs. To minimize or pre-

vent such interference, the base of the cord-

less telephone should not be placed near or

on top of a TV or VCR.

LIGHTNING

Your telephone has built-in lightning protec-

tion to reduce the risk of damage from surg-

es in telephone line and power line current.

This lightning protection meets or exceeds

FCC requirements. However, lightning strik-

ing the telephone or power lines can damage

your telephone.

Lightning damage is not common. Neverthe-

less, if you live in an area that has severe

electrical storms, we suggest that you unplug

your phone during storms to reduce the pos-

sibility of damage.

IMPORTANT SAFETY

INSTRUCTIONS

When using your telephone equipment, ba-

sic safety precautions should always be fol-

lowed to reduce the risk of fire, electric shock

and injury to persons, including the following:

1. Read and understand all instructions.

2. Follow all warnings and instructions

marked on the product.

3. Never install telephone wiring during a

lightning storm.

43-3805.fm Page 4 Wednesday, May 17, 2000 3:48 PM

4. Never install telephone jacks in wet

locations unless the jack is specifically

designed for wet locations.

5. Never touch uninsulated telephone

wires or terminals unless the telephone

line has been disconnected at the net-

work interface.

6. Use caution when installing or modifying

telephone lines.

7. Do not fix the AC power supply cord to

building surfaces with metal fittings (if

the product has an AC power cord).

8. Unplug this product from the wall outlet

before cleaning. Do not use liquid clean-

ers or aerosol cleaners. Use a damp

cloth for cleaning.

9. Do not use this product near water, for

example, near a bath tub, wash bowl,

kitchen sink, or laundry tub, in a wet

basement, or near a swimming pool.

10. Do not place this product on an unstable

cart, stand, or table. The product may

fall, causing serious damage to the

product.

11. Slots and openings in the cabinet and

the back or bottom are provided for ven-

tilation. To protect it from overheating,

these openings must not be blocked or

covered. The openings should never be

blocked by placing the product on a bed,

sofa, rug, or other similar surface. This

product should never be placed near or

over a radiator or heat register. This

product should not be placed in a built-in

installation unless proper ventilation is

provided.

12. This product should be operated only

from the type of power source indicated

on the marking label. If you are not sure

of the type of power supply to your

home, consult your local power com-

pany.

13. Do not allow anything to rest on the

power cord. Do not locate this product

where the cord will be stepped on.

14. Do not overload wall outlets and exten-

sion cords as this can result in a risk of

fire or electric shock.

15. Never push objects of any kind into this

product through cabinet slots as they

may touch dangerous voltage points or

short out parts that could result in a risk

of fire or electric shock. Never spill liquid

of any kind on the product.

16. To reduce the risk of electric shock, do

not disassemble this product. Take it to

a qualified serviceman when service or

repair work is required. Opening or

removing covers may expose you to

dangerous voltages or other risks. Incor-

rect reassembly can cause electric

shock when the product is subsequently

used.

17. Unplug this product from the wall outlet

and refer servicing to qualified services

personnel under the following condi-

tions:

• When the power cord plug is damaged

or frayed.

• If liquid has been spilled into the prod-

uct.

• If the product has been exposed to rain

or water.

• If the product does not operate normally

by following the operating instructions.

Adjust only those controls that are cov-

ered by the operating instructions

because improper adjustments of other

controls may result in damage and will

often require extensive work by a quali-

43-3805.fm Page 5 Wednesday, May 17, 2000 3:48 PM

6Features

fied technician to restore the product to

normal operation.

• If the product has been dropped or the

cabinet has been damaged.

• If the product exhibits a distinct change

in performance.

18. Avoid using a telephone (other than a

cordless type) during an electrical storm.

There may be a remote risk of electric

shock from lightning.

19. Do not use the telephone to report a gas

leak while in the vicinity of the leak.

CAUTION: To reduce the risk of fire or injury,

read and follow these instructions.

1. Use only the appropriate type and size

battery pack specified in the instruction

manual provided for this product.

2. Do not dispose of the battery pack in a

fire. The cell may explode. Check with

local codes for possible special disposal

instructions.

3. Do not open or mutilate the battery

pack. Released electrolyte is corrosive

and may cause damage to the eyes or

skin. It may be toxic if swallowed.

4. Exercise care in handing the battery

pack in order not to short it with conduct-

ing materials such as rings, bracelets

and keys. The battery or conductor may

overheat and cause burns.

5. Charge the battery pack provided with or

identified for use with this product only in

accordance with the instructions and

limitations specified in the instruction

manual provided for this product.

6. Observe proper polarity orientation

between the battery pack and battery

charger.

SAVE THESE

INSTRUCTIONS

Features

Your RadioShack 900 MHz Digital Spread

Spectrum Cordless Telephone with Digital

Answering System uses advanced cordless

telephone technology to give you superior

audio quality and extended range. Its head-

set jack lets you connect an optional headset

for hands-free convenience.

The Digital Answering System has about a

18 minute record capacity and stores all

messages on a microchip. This gives you ad-

vanced capabilities over tape-based answer-

ing machines. For example, you can delete

individual messages and save the rest. Be-

cause your answering system is fully digital,

there are no tapes to bother with, no tape

mechanisms to wear out, and no lost mes-

sages if power fails.

The remote operation feature lets you ac-

cess your answering system from a touch-

tone phone, and guides you through system

operation with voice prompts.

TELEPHONE FEATURES

Spread Spectrum Technology — spreads

the signal across several frequencies, pro-

viding additional security for your phone con-

versations.

43-3805.fm Page 6 Wednesday, May 17, 2000 3:48 PM

Features

900 MHz — provides longer range and less

interference than many other cordless

phones.

20 Channels—automatically selects a clear

channel when you make or answer a call.

You can also manually change channels dur-

ing a call.

Ample Talk and Standby Time — the sup-

plied battery (when fully charged) provides

about 6 hours of talk time or 7 days of stand-

by time.

Facedown or Faceup Handset Charging

— you can place the handset on the base

facedown or faceup.

10-Number Memory Dialing — lets you

store 10 numbers in memory for easy dialing.

Page — lets you send a signal from the base

to the handset to page someone or to help

you locate the handset if you have misplaced

it.

Volume Control — lets you adjust the vol-

ume you hear through the handset.

Programmable Ringer — choose from four

tone/volume settings for the handset’s ringer.

Security Access-Protection Code — pre-

vents other cordless phone users from using

your phone line while the handset is off the

base.

Tone or Pulse Dialing — lets you use your

phone with tone or pulse (rotary) dialing and

lets you switch from pulse to tone dialing for

long-distance, bank-by- phone, or other spe-

cial services.

Hearing-Aid Compatibility — lets you use

your phone with hearing aids that have T

(telephone) switch.

ANSWERING SYSTEM

FEATURES

Day/Time Stamp — records the day and

time each message was recorded.

Message Counter — shows the number of

messages the answering system has record-

ed.

Call Screening — lets you listen as a caller

leaves a message so you can decide wheth-

er or not to answer the call.

Programmable PIN — you can set a two-

digit personal identification number (PIN) for

secure remote operation.

Adjustable Ring Number — lets you set the

answering system to answer after three or

five rings.

Two Prerecorded Messages — gives you

the option of using one of two prerecorded

outgoing messages or recording your own.

Announcement Only — lets you play an an-

nouncement for callers to hear, without re-

cording their messages.

Memo Recording — lets you leave messag-

es for yourself or others in your home or of-

fice. You can also record your phone

conversation.

Phone Pick-Up Detection — stops record-

ing when you pick up any phone on the same

line as the answering system, and resets to

answer the next call.

Toll-Saver — lets you avoid unnecessary

charges when you call by long distance to

check your messages.

Digital Volume Control — lets you precisely

adjust the speakerphone and message play-

back.

43-3805.fm Page 7 Wednesday, May 17, 2000 3:48 PM

8Installation

Installation

MOUNTING THE PHONE

You can place the telephone’s base on a

desk or table, mount it on a standard wall

plate, or directly on a wall.

Choose a location that is:

• near an AC outlet

• near a modular telephone line jack

• out of the way of normal activities

• away from electrical machinery, electri-

cal appliances, metal walls or filing cabi-

nets, wireless intercoms, alarms, and

room monitors

• away from other cordless phones

The base’s location affects the phone’s

range. If you have a choice of several loca-

tions, try each to see which provides the best

performance.

Cautions:

You must use a Class 2 power

source that supplies 9V DC

and delivers at least 350 mA.

Its center tip must be set to positive and

its plug must fit the telephone's DC IN 9V

jack. The supplied adapter meets these

specifications. Using an adapter that

does not meet these specifications

could damage the telephone or the

adapter.

• Always connect the AC adapter to the

telephone before you connect it to AC

power. When you finish, disconnect the

adapter from AC power before you dis-

connect it from the telephone.

Notes:

• Your telephone connects directly to a

modular telephone line jack. If your

phone line jack is not a modular jack,

you can update the wiring yourself,

using jacks and adapters available at

your local RadioShack store. Or, you

can let the phone company update the

wiring for you.

• The USOC number of the jack to be

installed is RJ11C (RJ11W for a wall

plate).

On a Desk Top

1. Plug one end of the supplied long modu-

lar cord into the TEL LINE jack on the

back of the base.

2. Plug the modular cord’s other end into a

modular telephone line jack.

3. Insert the supplied AC adapter’s barrel

plug into the DC IN 9V jack on the back of

the base.

43-3805.fm Page 8 Wednesday, May 17, 2000 3:48 PM

Installation

4. Route the adapter’s cord through the

strain relief slot on the bottom of the

base.

5. Plug the adapter into a standard AC out-

let.

6. Lift the base’s antenna to a vertical posi-

tion.

On a Wall Plate or Wall

1. Insert the two tabs at the top of the nar-

row end of the supplied bracket into the

base’s upper tab slots as shown, then

press down on the bracket’s latches and

insert them into the lower slots.

2. Plug one end of the supplied short mod-

ular cord into the TEL LINE jack on the

back of the base as in “On a Desk Top”

on Page 8.

3. Insert the supplied AC adapter’s barrel

plug into the DC IN 9V jack as in “On a

Desk Top” on Page 8.

4. Route the adapter and modular cords

through the grooves on the bracket.

5. Plug the modular cord’s other end into

the wall plate jack, then align the

bracket’s keyhole slots with the wall

plate studs and slide the base down-

ward to secure it.

6. Plug the adapter into a standard AC out-

let.

7. Press and lift out the handset holder, flip

it over as shown, then snap it back into

place so it holds the handset.

8. Lift the base’s antenna to a vertical posi-

tion.

Note: To mount the telephone directly on a

wall, you need two screws (not supplied) with

heads that fit into the keyhole slots on the

bottom of the base. Follow the steps under

“On a Wall Plate or Wall,” then apply these

additional instructions for placement on a

wall.

1. Drill two holes 315/16

inches (100 mm) apart.

Then thread a screw

into each hole, letting

the heads extend about

5/16 inch (8 mm) from

the wall.

2. Plug one end of the supplied long modu-

lar cord into the TEL LINE jack at the

back of the base.

315/16

5/16

43-3805.fm Page 9 Wednesday, May 17, 2000 3:48 PM

10 Installation

3. Align the bracket’s keyhole slots with the

mounting screws and slide the base

downward to secure it.

CONNECTING AND

CHARGING THE

BATTERY PACK

The telephone comes with a rechargeable

nickel-cadmium battery pack installed in the

handset, but not connected. Before using

your phone, you must connect the battery

pack, then charge it for about 24 hours.

1. Press down and slide off the battery

pack compartment cover.

2. Lift the battery pack out of the compart-

ment. Plug the battery pack’s connector

into the socket in the compartment. The

connector fits only one way.

3. Put the battery pack in the compartment.

4. Replace the cover.

To charge the battery pack, simply place the

handset on the base, facing either up or

down. The CHARGE/IN USE indicator on the

base lights.

Recharge the battery pack when the handset

beeps and the TALK/BATT indicator flashes.

Important: Be sure the battery pack is prop-

erly connected before you try to charge it.

The CHARGE/IN USE indicator lights when

the handset is on the base, even if the bat-

tery pack is not connected.

Notes:

• When you first use the phone after

charging or recharging the battery pack,

the phone might not work and you might

hear a five-beep error signal. If this hap-

pens, return the handset to the base for

about 5 seconds. This resets the secu-

rity access-protection code.

• Using a pencil eraser, clean the charg-

ing contacts on the handset and the

base about once a month.

• If the TALK/BATT indicator does not light

and the phone does not work, recharge

the battery pack. (The battery power

might be too low to light the indicator.)

• If the battery pack becomes weak during

a call, you hear a beep and the TALK/

BATT indicator flashes. When this hap-

pens, you cannot make another call on

the phone until you recharge the battery

pack.

• About once a month, fully discharge the

battery pack by keeping the handset off

the base until the TALK/BATT indicator

flashes. Otherwise, the battery pack

loses its ability to fully recharge.

43-3805.fm Page 10 Wednesday, May 17, 2000 3:48 PM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Radio Shack Schnurloses Telefon Handbücher

Radio Shack

Radio Shack ET-539 Bedienungsanleitung

Radio Shack

Radio Shack 4301122D Bedienungsanleitung

Radio Shack

Radio Shack 2.4 GHz Digital Spread Spectrum Cordless Telephone with Call Waiting/Caller... Bedienungsanleitung

Radio Shack

Radio Shack 43-3548 Bedienungsanleitung

Radio Shack

Radio Shack ET-916 Bedienungsanleitung

Radio Shack

Radio Shack ET-1112 Bedienungsanleitung

Radio Shack

Radio Shack ET-689 Bedienungsanleitung

Radio Shack

Radio Shack TAD-729 Bedienungsanleitung

Radio Shack

Radio Shack 43-324 Bedienungsanleitung

Radio Shack

Radio Shack 43-5862 Bedienungsanleitung

Radio Shack

Radio Shack ET-543 Bedienungsanleitung

Radio Shack

Radio Shack ET-687 Bedienungsanleitung

Radio Shack

Radio Shack 43-3812 Bedienungsanleitung

Radio Shack

Radio Shack 43-3502 Bedienungsanleitung

Radio Shack

Radio Shack ET-1105 Bedienungsanleitung

Radio Shack

Radio Shack ET-910 Bedienungsanleitung

Radio Shack

Radio Shack 43-3535 Bedienungsanleitung

Radio Shack

Radio Shack SP-515 Bedienungsanleitung

Radio Shack

Radio Shack ET-917 Bedienungsanleitung

Radio Shack

Radio Shack 43-3505 Bedienungsanleitung

Radio Shack

Radio Shack 900 MHz Digital Spread Spectrum... Bedienungsanleitung

Radio Shack

Radio Shack ET-1126 Bedienungsanleitung

Radio Shack

Radio Shack 43-327 Bedienungsanleitung

Radio Shack

Radio Shack 900 MHz Digital Spread Spectrum Dual Keypad Cordless Telephone with Caller ID/Call Waiting... Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung