Rockwell Automation Allen-Bradley EtherNet/IP Bedienungsanleitung

EtherNet/IP Network Devices

User Manual

Original Instructions

Important User Information

Read this document and the documents listed in the additional resources section about installation, configuration, and

operation of this equipment before you install, configure, operate, or maintain this product. Users are required to

familiarize themselves with installation and wiring instructions in addition to requirements of all applicable codes, laws,

and standards.

Activities including installation, adjustments, putting into service, use, assembly, disassembly, and maintenance are

required to be carried out by suitably trained personnel in accordance with applicable code of practice.

If this equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may

be impaired.

In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from

the use or application of this equipment.

The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and

requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or

liability for actual use based on the examples and diagrams.

No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or

software described in this manual.

Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation,

Inc., is prohibited

Throughout this manual, when necessary, we use notes to make you aware of safety considerations.

Labels may also be on or inside the equipment to provide specific precautions.

WARNING: Identifies information about practices or circumstances that can cause an explosion in a hazardous

environment, which may lead to personal injury or death, property damage, or economic loss.

ATTENTION: Identifies information about practices or circumstances that can lead to personal injury or death, property

damage, or economic loss. Attentions help you identify a hazard, avoid a hazard, and recognize the consequence.

IMPORTANT Identifies information that is critical for successful application and understanding of the product.

SHOCK HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that dangerous

voltage may be present.

BURN HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that surfaces may

reach dangerous temperatures.

ARC FLASH HAZARD: Labels may be on or inside the equipment, for example, a motor control center, to alert people to

potential Arc Flash. Arc Flash will cause severe injury or death.Wear proper Personal Protective Equipment (PPE). Follow ALL

Regulatory requirements for safe work practices and for Personal Protective Equipment (PPE).

Rockwell Automation Publication ENET-UM006A-EN-P - March 2019 3

Table of Contents

Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Additional Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Chapter 1

EtherNet/IP Features in Allen-

Bradley Network Devices

EtherNet/IP Device-Specific Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Duplicate IP Address Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Duplicate IP Address Resolution. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

IP Address Swapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

DNS Addressing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Socket Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Linear Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Device Level Ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Parallel Redundancy Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

EtherNet/IP Network Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Time Synchronization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Chapter 2

Configure a Workstation to

Operate on an EtherNet/IP

Network

Configure the Ethernet Communication Driver in RSLinx Classic

Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Configure the USB Communication Driver in RSLinx Classic Software

Chapter 3

Set an IP Address Set the IP Address with the BOOTP/DHCP Utility . . . . . . . . . . . . . 25

Disable BOOTP/DHCP with RSLinx Classic Software . . . . . . 28

DHCP Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Set the IP Address with RSLinx Classic Software. . . . . . . . . . . . . . . . . 30

Configure Port Settings with RSLinx Classic Software. . . . . . . . 32

Set the IP Address with Studio 5000 Logix Designer Application. . 34

Reset the IP Address to Factory Default Value . . . . . . . . . . . . . . . . . . . 35

Chapter 4

Configure the Device Add the Device to the Controller Organizer . . . . . . . . . . . . . . . . . . . . . 37

Configure EtherNet/IP Communication. . . . . . . . . . . . . . . . . . . . . . . . 38

Produced and Consumed Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Message Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

4Rockwell Automation Publication ENET-UM006A-EN-P - March 2019

Table of Contents

Chapter 5

Send Email EtherNet/IP Communication Module as an Email Client . . . . . . . . 41

Send Email Via a Controller-initiated Message Instruction. . . . . . . . 43

Create String Tags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Enter the Ladder Logic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Configure the MSG Instruction That Identifies the Mail Relay

Server. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Configure the MSG Instruction That Contains the Email Text 50

Configure the Email Object . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Possible Email Status Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

Rockwell Automation Publication ENET-UM006A-EN-P - March 2019 5

Preface

This manual describes how to use EtherNet/IP communication modules in

Logix 5000™ control systems.

Make sure that you are familiar with the following:

• Use of a controller in a Logix 5000 control system, including these

following controllers:

– CompactLogix™ 5380 controllers

– Compact GuardLogix® 5380 controllers

– CompactLogix 5480 controller

– ControlLogix® 5580 controllers

– GuardLogix® 5580 controllers

• Use of an EtherNet/IP network

• Use of various software applications from Rockwell Automation

Additional Resources These documents contain more information concerning related products from

Rockwell Automation.

Table 1 - Additional Resources

Resource Description

EtherNet/IP Media Planning and

Installation Manual

Describes how to use the required media components and how to

plan for, install, verify, troubleshoot, and certify your EtherNet/IP

network.

This manual is available from the Open DeviceNetVendor Association

(ODVA) at: http://www.odva.org.

Ethernet Design Considerations Reference

Manual, publication ENET-RM002

Describes basic Ethernet concepts:

EtherNet/IP Socket Interface Application

Technique, publication ENET-AT002

Describes the socket interface that you can use to program MSG

instructions to communicate between a Logix 5000™ controller and

Ethernet devices. In this case, the interface is used because the

Ethernet devices that do not support the EtherNet/IP application

protocol. Such devices include barcode scanners, RFID readers, or

other standard Ethernet devices.

EtherNet/IP Embedded SwitchTechnology

Application Guide, publication ENET-AP005

Describes how to install, configure, and maintain linear and Device

Level Ring (DLR) networks by using Rockwell Automation® EtherNet/

IP devices that are equipped with embedded switch technology.

EtherNet/IP Parallel Redundancy Protocol

Application Technique,

publication ENET-AT006

Describes how you can configure a Parallel Redundancy Protocol

(PRP) network with the 1756-EN2TP EtherNet/IP communication

module and a Stratix® 5400 or 5410 switch.

Integrated Architecture and CIP Sync

Configuration Application Technique,

publication IA-AT003

Provides information on CIP Sync and the IEEE 1588-2008 Precision

Time Protocol.

Integrated Motion on the EtherNet/IP

Network Reference Manual, publication

MOTION-RM003

Reference descriptions of the AXIS_CIP_DRIVE attributes and the

Studio 5000 Logix Designer® application Control Modes and Methods

Electronic Keying in Logix 5000 Control

Systems ApplicationTechnique,

publication LOGIX-AT001

Describes how to use electronic keying in Logix 5000 control system

applications.

6Rockwell Automation Publication ENET-UM006A-EN-P - March 2019

Preface

You can view or download publications at

http://www.rockwellautomation.com/literature/. To order paper copies of

technical documentation, contact your local Allen-Bradley distributor or

Rockwell Automation sales representative.

Network Technology webpage,

http://www.rockwellautomation.com/

rockwellautomation/products-

technologies/network-technology/

overview.page?

Provides information on reference architectures and white papers on

networking.

Industrial Automation Wiring and

Grounding Guidelines, publication

1770-4.1

Provides general guidelines for installing a Rockwell Automation®

industrial system.

Product Certifications website,

http://www.rockwellautomation.com/

rockwellautomation/certification/

overview.page

Provides declarations of conformity, certificates, and other

certification details.

Table 1 - Additional Resources

Resource Description

Rockwell Automation Publication ENET-UM006A-EN-P - March 2019 7

Chapter 1

EtherNet/IP Features in Allen-Bradley Network

Devices

EtherNet/IP networks offer a comprehensive suite of messages and services for

many automation applications. This open network standard uses standard

Ethernet communication products to support real-time I/O messaging,

information exchange, and general messaging. Other features to all EtherNet/

IP network devices include the following:

• Support for messaging, produced/consumed tags, and distributed I/O

• DNS addressing

• Internet Group Management Protocol (IGMP) snooping (enabled by

default) and querier (disabled by default)

• Port configuration and diagnostics

•Emailserver

EtherNet/IP networks also support CIP Safety applications. Such support

makes the simultaneous transmission of safety and standard control data and

diagnostics information over a common network possible.

Topic Page

EtherNet/IP Device-Specific Features 8

Duplicate IP Address Detection 10

IP Address Swapping 11

DNS Addressing 11

Socket Interface 12

Linear Network 12

Device Level Ring 13

Parallel Redundancy Protocol 14

EtherNet/IP Network Specifications 14

Time Synchronization 16

8Rockwell Automation Publication ENET-UM006A-EN-P - March 2019

Chapter 1 EtherNet/IP Features in Allen-Bradley Network Devices

EtherNet/IP Device-Specific

Features

EtherNet/IP network devices can provide the following functionality. See the

user manual for your device for details.

• Support for the following communication rates:

– 10 Mbps

– 100 Mbps

–1Gbps

•Linearnetwork

•DeviceLevelRingprotocol

• Option to operate as a Ring supervisor on a DLR network

• Parallel Redundancy Protocol

• Duplicate IP address detection

• Socket interface

• Email client

IMPORTANT • When a device uses the 1 Gbps network communication rate, it

supports only full-duplex mode.

• When a device uses the 10 Mbps or 100 Mbps network

communication rate, it supports full-duplex and half-duplex

mode.

Rockwell Automation Publication ENET-UM006A-EN-P - March 2019 9

EtherNet/IP Features in Allen-Bradley Network Devices Chapter 1

Figure 1 shows how Rockwell Automation® EtherNet/IP network devices fit

into a control system. In this example, the following can occur over the

EtherNet/IP network:

• Controllers produce and consume tags

• Controllers initiate MSG instructions that send and receive data

• Control of I/O modules

• Use of Integrated Motion over an EtherNet/IP network

• Workstations configure devices, and upload or download projects to the

controllers

Figure 1 - EtherNet/IP Network Devices in a Control System

ENETLINK

EtherNet/IP

RUN PROG

REM

Logix5585E

NET

LINK

SAFETYON

RUN PROG

REM

Logix5584ES

NET

LINK

NETLNK2 OKLNK1

1734-AENTR

Module

Status

Network

Activity

Network

Status

PointBus

Status

System

Power

Field

Power

POINT I O

Link1

Activity/

Status

Link2

Activity/

Status

IPADDRESS

DCINPUT

5069-IB16

DCOUTPUT

5069-OB16

ANALOGINPUT

5069-IY4

ANALOGOUTPUT

5069-OF8

SAPower MODPower

ANALOGOUTPUT

5069-OF8

DCINPUT

5069-IB16

DCOUTPUT

5069-OB16

ANALOGINPUT

5069-IY4

ANALOGOUTPUT

5069-OF8

COUNTER

5069-HSC2xOB4

Compact5000™ I/O

1734-AENTR

Module

Status

Network

Activity

Network

Status

PointBus

Status

System

Power

Field

Power

POINT I O

Link1

Activity/

Status

Link2

Activity/

Status

IPADDRESS

DCINPUT

5069-IB16

DCOUTPUT

5069-OB16

ANALOGINPUT

5069-IY4

ANALOGOUTPUT

5069-OF8

SAPower MODPower

ANALOGOUTPUT

5069-OF8

DCINPUT

5069-IB16

DCOUTPUT

5069-OB16

ANALOGINPUT

5069-IY4

ANALOGOUTPUT

5069-OF8

COUNTER

5069-HSC2xOB4

Compact5000™ I/O

Switch

Distributed I/O

ControlLogix® Controllers

ControlLogix I/O Modules

1794-AENT Adapter

FLEX™ I/O Modules

Workstation

PanelView™ 5500 Terminal

5069-L340ERM Controller

Compact 5000™ I/O Modules

Kinetix® 5700

Servo Drive

5069-L340ERM Controller

Compact 5000™ I/O Modules

Workstation

1783-ETAP

5069-AENTR Adapter

Compact 5000 I/O Modules

1734-AENTR Adapter

POINT I/O™ Modules

Star Topology

5094-AENTR Adapter

FLEX 5000™ I/O Modules

DLR Topology

PanelView™ 5500 Terminal

5094-AENTR Adapter

FLEX 5000™ I/O Modules

1734-AENTR

POINT I/O™ Modules

PowerFlex® 525

Drive

5069-AENTR Adapter

Compact 5000™ I/O

Modules

1756-EN4TR

1756 I/O Modules

10 Rockwell Automation Publication ENET-UM006A-EN-P - March 2019

Chapter 1 EtherNet/IP Features in Allen-Bradley Network Devices

Duplicate IP Address

Detection

Duplicate IP address detection verifies that an IP address does not match any

other device IP address on the network when you perform either of these tasks:

• Connect the device to a EtherNet/IP network.

• Change the IP address on the device.

If the IP address matches that of another device on the network, the

EtherNet/IP port on the device transitions to conflict mode. In conflict mode,

these conditions exist:

• OK status indicator blinks red.

• Network (NET) status indicator is solid red.

• If the device has a text display, the following message scrolls across the 4-

character display:

<IP_address_of_this_device> Duplicate IP -

<MAC_address_of_duplicate_node_detected>

For example: 10.88.60.196 Duplicate IP - 00:00:BC:02:34:B4

Duplicate IP Address Resolution

This table describes how to resolve duplicate IP addresses.

Duplicate IP Address Detection Conditions Resolution Process

• Both devices support duplicate IP address detection

• Second device is added to the network after the first

device is operating on the network

1. The device that began operation first uses the IP address and continues to operate without interruption.

2. The device that begins operation second detects the duplication and enters Conflict mode.

• Both devices support duplicate IP address detection

• Both devices were powered up at approximately the

same time

Both EtherNet/IP devices enter Conflict mode.

To resolve this conflict, follow these steps:

a. Assign a new IP address to one of the devices.

b. Cycle power to the other device or disconnect and reconnect all Ethernet cables from the other device.

One device supports duplicate IP address detection and a

second device does not

1. Regardless of which device obtained the IP address first, the device that does not support IP address detection

uses the IP address and continues to operate without interruption.

2. The device that supports duplicate IP address detection detects the duplication and enters Conflict mode.

Inhaltsverzeichnis

Andere Rockwell Automation Steuereinheit Handbücher

Rockwell Automation

Rockwell Automation Allen-Bradley FLEX 5000 Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Kinetix 3 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1794-IRT8 Bedienungsanleitung

Rockwell Automation

Rockwell Automation SILVER Technology HARRY HI 1734-WS Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley SynchLink 1756-SYNCH Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley SLC 500 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Trusted TMR Expander Interface Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1756-EWEB Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1756-EWEB Bedienungsanleitung

Rockwell Automation

Rockwell Automation Bulletin 193 E1 PLUS Benutzerhandbuch

Rockwell Automation

Rockwell Automation Allen-Bradley MicroLogix 1762-OW16 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1769-BOOLEAN Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Compact GuardLogix 5370... Benutzerhandbuch

Rockwell Automation

Rockwell Automation 2711P-RPA Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 2198-R031 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1746-HSCE Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 20-750-PNET Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 750 Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley ControlLogix DeviceNet... Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley ControlLogix B Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation D2-3563 Bedienungsanleitung

Rockwell Automation

Rockwell Automation 193-EGF Series Benutzerhandbuch

Rockwell Automation

Rockwell Automation 1336 PLUS Bedienungsanleitung

Rockwell Automation

Rockwell Automation Trusted T8834 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung