Rockwell Automation Allen-Bradley Logix5000 Betriebsanleitung

Programming Manual

Logix5000 Controllers Security

Catalog Numbers 1756 ControlLogix, 1769 CompactLogix, 1789

SoftLogix, PowerFlex 700S with DriveLogix

Important user information

Read this document and the documents listed in the additional resources section about installation, configuration, and operation of this

equipment before you install, configure, operate, or maintain this product. Users are required to familiarize themselves with installation and

wiring instructions in addition to requirements of all applicable codes, laws, and standards.

Activities including installation, adjustments, putting into service, use, assembly, disassembly, and maintenance are required to be carried

out by suitably trained personnel in accordance with applicable code of practice. If this equipment is used in a manner not specified by the

manufacturer, the protection provided by the equipment may be impaired.

In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the use or

application of this equipment.

The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and requirements

associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or liability for actual use based on the

examples and diagrams.

No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or software described

in this manual.

Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation, Inc., is prohibited.

Throughout this manual, when necessary, we use notes to make you aware of safety considerations.

WARNING: Identifies information about practices or circumstances that can cause an explosion in

a hazardous environment, which may lead to personal injury or death, property damage, or

economic loss.

ATTENTION: Identifies information about practices or circumstances that can lead to personal

injury or death, property damage, or economic loss. Attentions help you identify a hazard, avoid a

hazard, and recognize the consequence

Important:

Identifies information that is critical for successful application and understanding of the product.

Labels may also be on or inside the equipment to provide specific precautions.

SHOCK HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to

alert people that dangerous voltage may be present.

BURN HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert

people that surfaces may reach dangerous temperatures.

ARC FLASH HAZARD: Labels may be on or inside the equipment, for example, a motor control

center, to alert people to potential Arc Flash. Arc Flash will cause severe injury or death. Wear

proper Personal Protective Equipment (PPE). Follow ALL Regulatory requirements for safe work

practices and for Personal Protective Equipment (PPE).

Allen-Bradley, Rockwell Software, Rockwell Automation, and TechConnect are trademarks of Rockwell Automation, Inc.

Trademarks not belonging to Rockwell Automation are property of their respective companies.

Rockwell Automation Publication 1756-PM016H-EN-P - March 2015 3

Summary of changes

This manual contains new and updated information. Changes to this manual

are documented in the following table.

Change

Topic

Reordered sections on source keys

Applying source protection on page 34

through Source key file on page 40

Added information on License-Based

Source Protection

Configuring source protection in the

Logix Designer application on page 33

Rockwell Automation Publication 1756-PM016H-EN-P - March 2015 5

Table of contents

Studio 5000 environment ...................................................................... 7

Additional resources ............................................................................. 8

Legal notices ......................................................................................... 8

Chapter 1

Introduction ......................................................................................... 11

FactoryTalk Security ........................................................................... 12

FactoryTalk Directories ................................................................ 12

Chapter 2

Introduction ......................................................................................... 13

Installing the Rockwell Software Security Emulator.......................... 13

Enabling security ................................................................................ 13

Installing FactoryTalk Services Platform software............................. 15

Securing a Logix Designer application project file ............................ 16

Applying security to a controller resource .......................................... 22

Chapter 3

Introduction ......................................................................................... 27

Importing a security server database................................................... 27

Importing Status text file .............................................................. 31

Organizer import result ................................................................. 31

Resource Editor ............................................................................. 32

Chapter 4

Introduction ......................................................................................... 33

Enable source protection ..................................................................... 33

Disable the Configure Source Protection menu option....................... 33

Apply Source Key protection to a component .................................... 34

Specify a Source Key file and location ......................................... 34

Protect components with Source Keys ......................................... 36

View components without a key ................................................... 42

Verify source key protection on a component .............................. 43

Remove access to a protected routine ........................................... 43

Apply License protection to a component .......................................... 44

Protect components with Licenses ................................................ 44

Apply License Protection to one or more components ................. 46

Share License privileges with other users on your network ......... 47

Summary of changes

Preface

Security

Configuring

FactoryTalk Security

with Logix Designer

application

Migrating from a

security server

database to a

FactoryTalk server

Configuring source

protection in the

Logix Designer

application

Table of contents

6 Rockwell Automation Publication 1756-PM016H-EN-P - March 2015

Chapter 5

Introduction ......................................................................................... 55

Installing the Logix CPU Security Tool ............................................. 55

Securing a ControlLogix controller with the Logix CPU Security Tool

............................................................................................................. 55

Accessing a secured controller...................................................... 59

Removing security from a controller with the CPU Security Tool

....................................................................................................... 62

Removing a password ................................................................... 64

Securing a

ControlLogix

controller

Index

Rockwell Automation Publication 1756-PM016H-EN-P - March 2015 7

Preface

This manual explains how to configure security for the Logix Designer™

application. It also explains how to set up source protection for your logic

and projects. This manual is one of a set of related manuals that show

common procedures for programming and operating Logix5000™

controllers.

For a complete list of common procedures manuals, refer to the Logix5000

Controllers Common Procedures Programming Manual.

The term Logix5000 controller refers to any controller that is based on the

Logix5000 operating system.

The Studio 5000 Automation Engineering & Design Environment™

combines engineering and design elements into a common environment. The

first element is the Studio 5000 Logix Designer™ application. The Logix

Designer application is the rebranding of RSLogix™ 5000 software and will

continue to be the product to program Logix5000™ controllers for discrete,

process, batch, motion, safety, and drive-based solutions.

The Studio 5000® environment is the foundation for the future of

Rockwell Automation® engineering design tools and capabilities. The Studio

5000 environment is the one place for design engineers to develop all

elements of their control system.

Studio 5000

environment

Preface

8Rockwell Automation Publication 1756-PM016H-EN-P - March 2015

These documents contain additional information concerning related products

from Rockwell Automation.

Resource

Description

Industrial Automation Wiring and

Grounding Guidelines

Provides general guidelines for

installing a Rockwell Automation

industrial system.

FactoryTalk Security System

Configuration Guide

Provides additional information on

FactoryTalk™ security.

Product Certifications website,

http://ab.rockwellautomation.com

Provides declarations of

conformity, certificates, and other

certification details.

You can view or download publications at

http://www.rockwellautomation.com/literature/. To order paper copies of

technical documentation, contact your local Allen-Bradley™ distributor

or Rockwell Automation™ sales representative.

This document and any accompanying Rockwell Software products are

copyrighted by Rockwell Automation, Inc. Any reproduction and/or

distribution without prior written consent from Rockwell Automation, Inc. is

strictly prohibited. Please refer to the license agreement for details.

End User License Agreement (EULA)

You can view the Rockwell Automation End-User License Agreement

("EULA") by opening the License.rtf file located in your product's install

folder on your hard drive.

Trademark Notices

Allen-Bradley, Rockwell Automation, Rockwell Software, CompactLogix,

ControlLogix, DriveLogix, FactoryTalk, FactoryTalk Administration

Console, FactoryTalk AssetCentre, FactoryTalk Batch, FactoryTalk

Additional

resources

Legal notices

Preface

Rockwell Automation Publication 1756-PM016H-EN-P - March 2015 9

Directory, FactoryTalk Integrator, FactoryTalk Security, FactoryTalk

Services Platform, FactoryTalk View Machine Edition, FactoryTalk View

SE, Logix5000, Logix Designer, RSLinx Classic, Rockwell Software

Security Emulator, RSLogix 5000, and Studio 5000 are trademarks of

Rockwell Automation, Inc.

Any Rockwell Automation software or hardware not mentioned here is also a

trademark, registered or otherwise, of Rockwell Automation, Inc.

Other Trademarks

CmFAS Assistant, CmDongle, CmStick, CodeMeter, CodeMeter Control

Center, and WIBU are trademarks of WIBU-SYSTEMS AG in the United

States and/or other countries.

All other trademarks are the property of their respective holders and are

hereby acknowledged.

Warranty

This product is warranted in accordance with the product license. The

product’s performance may be affected by system configuration, the

application being performed, operator control, maintenance, and other related

factors. Rockwell Automation is not responsible for these intervening factors.

The instructions in this document do not cover all the details or variations in

the equipment, procedure, or process described, nor do they provide

directions for meeting every possible contingency during installation,

operation, or maintenance. This product’s implementation may vary among

users.

This document is current as of the time of release of the product; however,

the accompanying software may have changed since the release. Rockwell

Automation, Inc. reserves the right to change any information contained in

this document or the software at any time without prior notice. It is your

responsibility to obtain the most current information available from Rockwell

when installing or using this product.

Environmental Compliance

Rockwell Automation maintains current product environmental information

on its website at

http://www.rockwellautomation.com/rockwellautomation/about-us/sustainabi

lity-ethics/product-environmental-compliance.page

Contact Rockwell

Customer Support Telephone — 1.440.646.3434

Online Support — http://www.rockwellautomation.com/support/

Preface

10 Rockwell Automation Publication 1756-PM016H-EN-P - March 2015

Andere Handbücher für Allen-Bradley Logix5000

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Rockwell Automation Controller Handbücher

Rockwell Automation

Rockwell Automation ARMORSTART Betriebsanleitung

Rockwell Automation

Rockwell Automation Samsung NX70 Bedienungsanleitung

Rockwell Automation

Rockwell Automation PowerFlex 700S Bedienungsanleitung

Rockwell Automation

Rockwell Automation MicroLogix 1500 Bedienungsanleitung

Rockwell Automation

Rockwell Automation PowerFlex 700S Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley SMC-3 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Micro820 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Logix 5000 Series Betriebsanleitung

Rockwell Automation

Rockwell Automation SmartGuard 600 Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L23E-QB1B Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1756-L1 Bedienungsanleitung

Rockwell Automation

Rockwell Automation SMC Dialog Plus Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley SMC-PLUS Bulletin 150 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Logix 5000 Series Betriebsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1769-OA16 Bedienungsanleitung

Rockwell Automation

Rockwell Automation SmartGuard 600 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley MicroLogix Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Logix 5000 Series Betriebsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Logix 5000 Series Betriebsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Logix5000 Betriebsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley GuardLogix 5580 Bedienungsanleitung

Rockwell Automation

Rockwell Automation SLC 500 Thermocouple Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Logix 5000 Series Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch