Rockwell Automation MicroLogix 1500 Bedienungsanleitung

Installation Instructions

MicroLogix™ 1500 Programmable

Controller Base Units

(Catalog Numbers 1764-24AWA, 1764-24BWA, and

1764-28BXB)

http://literature.rockwellautomation.com/idc/groups/literature/documents/in/1

764-in001_-mu-p.pdf

Cette publication est disponible en français sous forme électronique (fichier PDF). Pour la

télécharger, rendez-vous sur la page Internet indiquée ci-dessus.

Questa pubblicazione è disponibile in Italiano in formato PDF. Per scaricarla collegarsi al sito

Web indicato sopra.

Diese Publikation ist als PDF auf Deutsch verfügbar. Gehen Sie auf die oben genannte

Web-Adresse, um nach der Publikation zu suchen und sie herunterzuladen.

Esta publicación está disponible en español como PDF. Diríjase a la dirección web indicada

arriba para buscar y descarga esta publicación.

Esta publicação está disponível em portugués como PDF. Vá ao endereço web que aparece

acima para encontrar e fazer download da publicação.

2MicroLogix™ 1500 Programmable Controller Base Units

Publication 1764-IN001B-EN-P - March 2008

Publication 1764-IN001B-EN-P

Installation Instructions

MicroLogix™ 1500 Programmable

Controller Base Units

(Catalog Numbers 1764-24AWA, 1764-24BWA, and

1764-28BXB)

Inside...

For More Information.............................................................................. 4

Overview ................................................................................................. 5

Base Unit Description ............................................................................. 6

Hazardous Location Considerations ....................................................... 7

Mounting the Controller ......................................................................... 9

Wiring the Controller ............................................................................ 13

Specifications ....................................................................................... 17

4MicroLogix™ 1500 Programmable Controller Base Units

Publication 1764-IN001B-EN-P

For More Information

If you would like a manual, you can:

• download a free electronic version from the internet:

http://literature.rockwellautomation.com

•purchase a printed manual by contacting your local Allen-Bradley

distributor or Rockwell Automation representative

Table 1 Related Publications

For Refer to this Document Pub. No.

A more detailed description of how to

install and use your MicroLogix 1500

programmable controller.

MicroLogix 1500

Programmable Controllers User

Manual

1764-UM001A-US-P

A reference manual that contains data and

functin files, instruction set, and

troubleshooting information for

MicroLogix 1200 and MicroLogix 1500.

MicroLogix 1200 and

MicroLogix 1500 Instruction

Set Reference Manual

1762-RM001B-US-P

More information on proper wiring and

grounding techniques. Industrial Automation Wiring

and Grounding Guidelines 1770-4.1

MicroLogix™ 1500 Programmable Controller Base Units 5

Publication 1764-IN001B-EN-P

Overview

Install your controller using these installation instructions.

ATTENTION Do not remove protective debris strips until after the base and

all other equipment in the panel near the base is mounted and

wiring is complete. Once wiring is complete, remove

protective debris strips and install processor unit. Failure to

remove strips before operating can cause overheating.

ATTENTION Be careful of metal chips when drilling mounting holes for

your controller or other equipment within the enclosure or

panel. Drilled fragments that fall into the controller could

cause damage. Do not drill holes above a mounted controller if

the protective debris strips have been removed.

ATTENTION Electrostatic discharge can damage semiconductor devices

inside the base unit. Do not touch the connector pins or other

sensitive areas.

Protective Debris

Strips

ESD Sticker

6MicroLogix™ 1500 Programmable Controller Base Units

Publication 1764-IN001B-EN-P

Base Unit Description

Table 2 Standard Base Units

Catalog Number Base Unit I/O and Power Supply

1764-24AWA 120V ac inputs/ relay outputs/ 120/240V ac power supply

1764-24BWA 24V dc inputs/ relay outputs/ 120/240V ac power supply

1764-28BXB 24V dc inputs/ FET and relay outputs/ 24V dc power supply

Table 3 Base Unit Description

Feature Description

1Removable Terminal Blocks

2Interface to Expansion I/O, Removable ESD Sticker

3Input LEDs

4Output LEDs

5RS-232 Communication Port (CH0)

6Status LEDs

7Terminal Doors and Label

MicroLogix™ 1500 Programmable Controller Base Units 7

Publication 1764-IN001B-EN-P

Hazardous Location Considerations

This equipment is suitable for use in Class I, Division 2, Groups A, B, C, D or

non-hazardous locations only. The following WARNING statement applies to

use in hazardous locations.

Use only the following communication cables in Class I, Division 2 hazardous

locations.

WARNING EXPLOSION HAZARD

• Substitution of components may impair suitability for Class

I, Division 2.

• Do not replace components or disconnect equipment unless

power has been switched off or the area is known to be

non-hazardous.

• Do not connect or disconnect components unless power has

been switched off or the area is known to be non-hazardous.

• This product must be installed in an enclosure. All cables

connected to the product must remain in the enclosure or be

protected by conduit or other means.

• All wiring must comply with N.E.C. article 501-4(b).

Table 4 Cable Listing

Environment Classification Communication Cables

Class I, Division 2 Hazardous Environment 1761-CBL-PM02 Series C or later

1761-CBL-HM02 Series C or later

1761-CBL-AM00 Series C or later

1761-CBL-AP00 Series C or later

2707-NC8 Series B or later

2707-NC10 Series B or later

2707-NC11 Series B or later

8MicroLogix™ 1500 Programmable Controller Base Units

Publication 1764-IN001B-EN-P

Environnements dangereux

Cet équipement est conçu pour être utilisé dans des environnements de Classe 1,

Division 2, Groupes A, B, C, D ou non dangereux. La mise en garde suivante

s’applique à une utilisation dans des environnements dangereux.

N'utilisez que les câbles de communication suivants dans des environnements

dangereux de Classe 1, Division 2.

DANGER D’EXPLOSION

• La substitution de composants peut rendre cet équipement impropre à

une utilisation en environnement de Classe 1, Division 2.

• Ne pas remplacer de composants ou déconnecter l'équipement sans

s'être assuré que l'alimentation est coupée et que l'environnement est

classé non dangereux.

• Ne pas connecter ou déconnecter des composants sans s'être assuré que

l'alimentation est coupée ou que l'environnement est classé non

dangereux.

• Ce produit doit être installé dans une armoire. Tous les câbles qui lui sont

connectés doivent rester dans l'armoire ou être protégés par un conduit

ou par d'autres moyens.

Table 5 Liste des câbles

Classification d'environnement Câbles de communication

Environnement dangereux Classe 1,

Division 2 1761-CBL-PM02, série C ou ultérieure

1761-CBL-HM02, série C ou ultérieure

1761-CBL-AM00, série C ou ultérieure

1761-CBL-AP00, série C ou ultérieure

2707-NC8, série B ou ultérieure

2707-NC10, série B ou ultérieure

2707-NC11, série B ou ultérieure

MISE EN GARDE

MicroLogix™ 1500 Programmable Controller Base Units 9

Publication 1764-IN001B-EN-P

Mounting the Controller

General Considerations

Most applications require installation in an industrial enclosure (Pollution Degree

2) to reduce the effects of electrical interference (Over Voltage Category II) and

environmental exposure. Locate your controller as far as possible from power

lines, load lines, and other sources of electrical noise such as hard-contact

switches, relays, and AC motor drives. For more information on proper

grounding guidelines, see the Industrial Automation Wiring and Grounding

Guidelines publication 1770-4.1.

ATTENTION

Vertical mounting is not recommended due to heat build-up

considerations.

ATTENTION Be careful of metal chips when drilling mounting holes for

your controller or other equipment within the enclosure or

panel. Drilled fragments that fall into the base or processor unit

could cause damage. Do not drill holes above a mounted

controller if the protective debris strips have been removed or

the processor has been installed.

NOTE Remove the ESD sticker to install expansion I/O modules. An

end cap terminator (catalog numbers 1769-ECR or -ECL) or

an extension cable (catalog numbers 1769-CRR1, -CRR3,

-CLL1, -CLL3, -CRL1, -CRL3) must be used at the end of the

group of I/O modules attached to the MicroLogix 1500

Controller. The end cap terminator is not provided with the

base unit. A maximum of eight I/O modules may be connected

to the base.

10 MicroLogix™ 1500 Programmable Controller Base Units

Publication 1764-IN001B-EN-P

Mounting Dimensions

Controller Spacing

The base unit is designed to be mounted horizontally, with the Compact™

expansion I/O extending to the right of the base unit. Allow 50 mm (2 in.) of

space on all sides for adequate ventilation, as shown below.

Table 6 Dimensions

Dimension 1764-24AWA 1764-24BWA 1764-28BXB

Height (A) 138 mm (5.43 in.)

Width (B) 168 mm (6.62 in.)

Depth (C) 87 mm (3.43 in.)

Top

Bottom

Side

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Rockwell Automation Controller Handbücher

Rockwell Automation

Rockwell Automation Allen-Bradley SMC-50 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Micro820 Bedienungsanleitung

Rockwell Automation

Rockwell Automation 9VT201-007HTNNN Bedienungsanleitung

Rockwell Automation

Rockwell Automation SmartGuard 600 Bedienungsanleitung

Rockwell Automation

Rockwell Automation MagneMotion 700-0871-00 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1756 ControlLogix Betriebsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Logix 5000 Series Betriebsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Logix5000 Betriebsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley AADvance T9110 Handbuch

Rockwell Automation

Rockwell Automation micrologix 1200 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley ARMORSTART Bedienungsanleitung

Rockwell Automation

Rockwell Automation PowerFlex 700 Bedienungsanleitung

Rockwell Automation

Rockwell Automation SmartGuard 600 Bedienungsanleitung

Rockwell Automation

Rockwell Automation PowerFlex 700S Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley GuardLogix 5570 Bedienungsanleitung

Rockwell Automation

Rockwell Automation PowerFlex 700S Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 856T-B24LC Bedienungsanleitung

Rockwell Automation

Rockwell Automation PowerFlex 700S Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley AADvance T9110 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Micro820 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 23PFC Bedienungsanleitung

Rockwell Automation

Rockwell Automation PowerFlex 700S Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Dialog Plus 1503D Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley GuardLogix 5580 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung