Rockwell Automation VersaView 5100 Bedienungsanleitung

VersaView 5100 Industrial Monitors

Catalog Numbers 6200M-12WBN, 6200M-15WBN, 6200M-19WBN, 6200M-22WBN

User Manual

Original Instructions

Important User Information

Read this document and the documents listed in the additional resources section about installation, configuration, and

operation of this equipment before you install, configure, operate, or maintain this product. Users are required to

familiarize themselves with installation and wiring instructions in addition to requirements of all applicable codes, laws,

and standards.

Activities including installation, adjustments, putting into service, use, assembly, disassembly, and maintenance are

required to be carried out by suitably trained personnel in accordance with applicable code of practice.

If this equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may

be impaired.

In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from

the use or application of this equipment.

The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and

requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or

liability for actual use based on the examples and diagrams.

No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or

software described in this manual.

Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation,

Inc., is prohibited.

Throughout this manual, when necessary, we use notes to make you aware of safety considerations.

Labels may also be on or inside the equipment to provide specific precautions.

WARNING: Identifies information about practices or circumstances that can cause an explosion in a hazardous

environment, which may lead to personal injury or death, property damage, or economic loss.

ATTENTION: Identifies information about practices or circumstances that can lead to personal injury or death, property

damage, or economic loss. Attentions help you identify a hazard, avoid a hazard, and recognize the consequence.

IMPORTANT Identifies information that is critical for successful application and understanding of the product.

SHOCK HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that dangerous

voltage may be present.

BURN HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that surfaces may

reach dangerous temperatures.

ARC FLASH HAZARD: Labels may be on or inside the equipment, for example, a motor control center, to alert people to

potential Arc Flash. Arc Flash will cause severe injury or death. Wear proper Personal Protective Equipment (PPE). Follow ALL

Regulatory requirements for safe work practices and for Personal Protective Equipment (PPE).

Rockwell Automation Publication 6200M-UM001A-EN-P - December 2017 3

Table of Contents

Preface

Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Additional Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Chapter 1

Monitor Features

Monitor Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Hardware Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Chapter 2

Install the Monitor

Before You Begin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Installation Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Environment and Enclosure Information. . . . . . . . . . . . . . . . . . . . . . . 12

European Union Directive Compliance . . . . . . . . . . . . . . . . . . . . . . . . 12

Installation Guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Enclosure Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Mounting Clearance Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Monitor Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Required Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Install the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Panel Mounting Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Panel Cutout Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Mount the Monitor in a Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

VESA Mount a Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Connect Peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Connect Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Connect AC Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Connect DC Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Chapter 3

Configure the Display

Set the Monitor Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Check and Change the Display Resolution . . . . . . . . . . . . . . . . . . . . . . . . . 23

Touch Screen Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Touch Screen Driver Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Adjust the Display Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

4Rockwell Automation Publication 6200M-UM001A-EN-P - December 2017

Table of Contents

Chapter 4

Clean the Monitor

Clean the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Clean the Integrated Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Clean the Air Openings and Cooling Fins . . . . . . . . . . . . . . . . . . . . . . 28

Remove Paint and Grease from Bezel . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Chapter 5

Troubleshoot the Monitor

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Ship or Transport the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Dispose of the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Rockwell Automation Publication 6200M-UM001A-EN-P - December 2017 5

Table of Contents

Notes:

6Rockwell Automation Publication 6200M-UM001A-EN-P - December 2017

Table of Contents

Notes:

Rockwell Automation Publication 6200M-UM001A-EN-P - December 2017 7

Preface

This manual is a user guide for VersaView® 5100 industrial monitors. It

provides procedures to the following:

• Install the monitor.

• Make monitor connections.

• Operate the monitor.

• Troubleshoot the monitor.

Abbreviations This publication can use the following abbreviations.

Abbr Meaning Abbr Meaning

BIOS Basic input/output system PCB Printed circuit board

CF CompactFlash PCDC Product Compatibility and Download Center

CMOS Complementary metal oxide

semiconductor

PCI Peripheral component interconnect

COM Communication (serial port interface) PCIe Peripheral component interconnect express

DDR Double data rate (RAM) PELV Protective extra-low voltage

DIMM Dual in-line memory module POST Power on self-test

DP DisplayPort (digital display interface) RAM Random access memory

DVI Digital video interface RTC Real-time clock

EEA European Environment Agency SELV Safety extra low voltage

EMC Electromagnetic compatibility SSD Solid-state drive

ESD Electrostatic discharge TFT Thin film transistor

IEC International Engineering Consortium UEFI Universal extensible firmware interface

LAN Local area network USB Universal serial bus

NDM

Non-display model

UPS Uninterruptible power source

NEMA

National Electrical Manufacturers

Association

VGA Video graphics array

PCAP

Protective capacitive (touch screen)

8Rockwell Automation Publication 6200M-UM001A-EN-P - December 2017

Preface

Additional Resources These documents contain additional information about related products from

Rockwell Automation.

You can view or download publications at

http://www.rockwellautomation.com/global/literature-library/overview.page.

To order paper copies of technical documentation, contact your local

Allen-Bradley distributor or Rockwell Automation sales representative.

Resource Description

Industrial Computer and Monitor Specifications Technical

Data, publication IC-TD001

Provides technical specifications about the VersaView

5100 industrial monitors.

Industrial Automation Wiring and Grounding Guidelines,

publication 1770-4.1

Provides general guidelines for installing a Rockwell

Automation industrial system.

Product Certifications website,

http://www.rockwellautomation.com/global/

certification/overview.page

Provides declarations of conformity, certificates, and

other certification details.

Rockwell Automation Publication 6200M-UM001A-EN-P - December 2017 9

Chapter 1

Monitor Features

The VersaView® 5100 monitors have an edge-to-edge, all glass, ten-point

multi-touch screen that can also be operated with gloves. The touch screens are

precalibrated so that recalibration is not necessary. These monitors are

optimized to work with the VersaView 5000 computer and thin client

portfolio to create a visualization, maintenance, control, or information

computing solution.

The monitors offer the following features:

• 12.1, 15.6, 18.5, or 21.5-inch active matrix display

• Native video resolutions from 1280 x 800 to 1920 x 1080 (full HD)

• Wide viewing angle with antiglare coating

• Windows and Linux compatible

• DC input power

Monitor Options Tab le 1 describes what options ship currently with VersaView 5100 industrial

monitors. To identify your monitor’s configuration, compare the nameplate

label on your monitor to Table 1.

A comparative summary of monitor features is in publication IC-TD001,

Industrial Computer and Monitors Specifications Technical Data.

Table 1 - VersaView 5100 Monitor Catalog Numbers and Display Sizes

Topic Page

Monitor Options 9

Hardware Features 10

Cat. No.

Display Size

(in.)

Resolution

(W x H, pixels)

Brightness

(cd/m2)Bezel

Touch

Screen

6200M-12WBN 12.1 1280 x 800 400 Tempered

Glass and

Stainless

Steel

PCAP

6200M-15WBN 15.6 1366 x 768

6200M-19WBN 18.5 450

6200M-22WBN 21.5 1920 x 1080 300

10 Rockwell Automation Publication 6200M-UM001A-EN-P - December 2017

Chapter 1 Monitor Features

Hardware Features Figure 1 shows the hardware features of VersaView 5100 monitors.

Figure 1 - VersaView 5100 Hardware Features

Item Component Item Component

1 Mounting clip slot(1)

(1) Depending on the monitor model, slots accommodate 8 to 14 mounting clips.

4USBport

2DisplayPort 524VDCpowerinputconnection

3 DVI-I port(2)

(2) Can be used for VGA with DVI-to-VGA adapter, cat. no. 6189V-DVIVGA, which is sold separately.

6Groundscrew

3456

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Rockwell Automation Industrieanlagen Handbücher

Rockwell Automation

Rockwell Automation THR Triguard SC300E Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 6189V-BOOKBRKT Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex AFE Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Guardmaster 442G-MAB B-U... Bedienungsanleitung

Rockwell Automation

Rockwell Automation Discrete Machine Performance Solution Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1732E-IT4IM12R Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1794-IJ2 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Bulletin 2364E Bedienungsanleitung

Rockwell Automation

Rockwell Automation 194R-SC1 Bedienungsanleitung

Rockwell Automation

Rockwell Automation 104-C60 Bedienungsanleitung

Rockwell Automation

Rockwell Automation MagneMotion MagneMover LITE Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 140M Bedienungsanleitung

Rockwell Automation

Rockwell Automation Reliance Electric GV3000 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley FLEX Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Kinetix 5700 Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley IntelliVAC 1503VC-BMC5 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 750-21G Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley LDAT Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 7703E Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1719 Ex I/O Bedienungsanleitung

Rockwell Automation

Rockwell Automation 14C226 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley QuickStick 150 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 140G-G-RMB Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley CrossBoard 141C-NFD Series Bedienungsanleitung

Beliebte Industrieanlagen Handbücher anderer Marken

ABB

ABB Unifix AD Handbuch

Mark 7

Mark 7 Evolution Bedienungsanleitung

Husky

Husky HyPET Bedienungsanleitung

bora

bora PM-1800 Bedienungsanleitung

Grizzly

Grizzly T32428 Bedienungsanleitung

Siemens

Siemens 8MF1 Series Bedienungsanleitung

ABB

ABB HT610965 Bedienungsanleitung

ABB

ABB SafeLink Bedienungsanleitung

Phoenix

Phoenix PHX-150 Bedienungsanleitung

ABB

ABB A165-L32 Bedienungsanleitung

ABB

ABB HT842936 Bedienungsanleitung

Hermetica

Hermetica 10 Series Bedienungsanleitung

HORNER

HORNER OEE Solution Bedienungsanleitung

Hammerhead

Hammerhead HG375 Bedienungsanleitung

SCHUNK

SCHUNK VERO-S NSE-A3 138 Gebrauchsanweisung

ABB

ABB HT566657 Bedienungsanleitung

Webasto

Webasto GSE CAN Bedienungsanleitung

ABB

ABB HT614003 Bedienungsanleitung