Rosewill RNX-N250PC2 Bedienungsanleitung

Wireless N PCI Adapter RNX-N250PC2 Quick Installation Guide

Wireless N PCI Adapter RNX-N250PC2

Quick Installation Guide

Rev:1.0.0

7109504253

Wireless N PCI Adapter RNX-N250PC2 Quick Installation Guide

The Quick Installation Guide will help you to install RNX-N250PC2 300M Wireless N

PCI Adapter in Windows XP/ Vista/ 7, including basic hardware and software

installation, as well as configuration of wireless network availability. For detailed

instructions, please refer to the User Guide in the Resource CD.

A. Hardware Installation

1. Turn off your computer and unplug the power cord from the computer.

2. Open the case. Locate an available PCI slot and remove its slot cover. Keep the

screw.

3. Insert the adapter into the PCI slot.

4. Secure the adapter with the screw removed in Step 2.

5. Close the case and insert the power cord back into the computer.

6. Turn on your computer.

You may see the Found New Hardware Wizard after the adapter has been inserted.

Please click Cancel.

B. Software Installation

The installation procedures in Windows XP/ Vista/ 7 are similar. Here takes the

procedures in Windows XP for example.

1. Insert the Resource CD into your CD-ROM drive, and open the folder named

RNX-N250PC2. Double-click Setup.exe to start the installation, and then the

following screen for preparing setup will appear.

Wireless N PCI Adapter RNX-N250PC2 Quick Installation Guide

Figure 1

2. Follow the InstallShield Wizard to complete the installation.

Note:

1) If Windows XP warns about Windows Logo testing, click Continue Anyway to

continue the installation.

2) After the Installation, will appear at the bottom of the screen in your

system tray. Otherwise, there may be some problems about the installation,

please check it seriously.

C. Connect to a Wireless Network

a. To connect

using

Wireless N Client Utility

Wireless N Client Utility is available in Windows XP/ Vista/ 7, and the way to use it is

similar, here takes Windows XP for example.

The Adapter's tray icon shows the signal strength using color and the received

signal strength indication (RSSI). If the icon is blue, a wireless connection has been

established. If the icon is , there is no connection. Follow the steps below to

launch a wireless connection manually.

1. Double-click the icon , then the Wireless N Client Utility will appear, you

can also run the utility by clicking Start→All programs→Rosewill→2.4GHz

Wireless N PCI Adapter RNX-N250PC2 Quick Installation Guide

Wireless Lite-N Client Utility. Then the utility configuration page will pop up on

the screen. (Figure 2).

Figure 2

2. The Network page will display all wireless networks that are available in your

area. To connect to a network, simply highlight the wireless network name and

click Connect.

Figure 3

3. If word None appears behind the SSID, this means the network to be

connected is not security-enabled and you can connect to the network without

entering a key.

If there is a “lock” icon behind the SSID, this means the wireless network is

secured. There are two ways to connect to it.

Method One: Input the security key into the field beside Security Key and click

OK to continue.

Wireless N PCI Adapter RNX-N250PC2 Quick Installation Guide

Method Two: Without entering a key, push the WPS (other brands may call it

QSS) button on your router if prompted to You can also connect by pushing

the button on the router as shown below. Then click OK to continue.

Figure 4

b. To connect using WPS

1. Push the WPS/QSS button on the back panel of the Router.

2. Launch the config utility and click WPS in the tools section. Select Push the

button on my access point or wireless router and then click Connect.

Figure 5

3. Wait for the connection progress to be completed.The following screen

indicates successful connectivity. Click OK to finish the WPS connection.

Wireless N PCI Adapter RNX-N250PC2 Quick Installation Guide

Figure 6

Note:

For more configuration methods of WPS, please refer to the User Guide on the

Resource CD.

c. To connect using Windows built-in wireless utility

Here takes Windows XP for example.

1. Right-click on the utility icon in your system tray (lower-right corner). Select

Switch to Windows wireless configuration tool.

Figure 7

Or double-click the utility icon to load the utility configuration page. Click

Advanced in the tools section and then select Use Windows wireless

configuration tool.

2. Right-click on the wireless computer icon in your system tray (lower-right

corner). Select View Available Wireless Networks.

Wireless N PCI Adapter RNX-N250PC2 Quick Installation Guide

Figure 8

3. The utility will display any available wireless networks in your area. Click on a

network (displayed using the SSID) and click the Connect button.

Figure 9

4. If the network is security-enabled, you will be prompted to enter the key as

shown below. If not, you will connect to the network directly without entering a

key.

Figure 10

The three methods above are all available; you can use any one of them to join the

Internet.

Thank you for purchasing a quality Rosewill Product.

Please register your product at: www.rosewill.com for complete warranty

information and future support for your product

Andere Handbücher für RNX-N250PC2

Inhaltsverzeichnis

Andere Rosewill PCI-Karte Handbücher

Rosewill

Rosewill RC-300 Bedienungsanleitung

Rosewill

Rosewill SATA II 4 Port PCI RAID Card RC217 Bedienungsanleitung

Rosewill

Rosewill RC302 Bedienungsanleitung

Rosewill

Rosewill RC303 Bedienungsanleitung

Rosewill

Rosewill RC-305E Bedienungsanleitung

Rosewill

Rosewill RC304-E Bedienungsanleitung

Rosewill

Rosewill RC508 Bedienungsanleitung

Rosewill

Rosewill RC-20002 Bedienungsanleitung

Rosewill

Rosewill RNWD?N9003PCE Bedienungsanleitung

Rosewill

Rosewill RNWD-N9003 PCE Bedienungsanleitung

Rosewill

Rosewill RC-302 Bedienungsanleitung

Rosewill

Rosewill RC-20003 Bedienungsanleitung

Rosewill

Rosewill RC-110 Bedienungsanleitung

Rosewill

Rosewill RNX-N150PCe Bedienungsanleitung

Rosewill

Rosewill RSV-S4-6G Bedienungsanleitung

Rosewill

Rosewill RNX-N300X Bedienungsanleitung

Rosewill

Rosewill RSV-S4-6G Bedienungsanleitung

Rosewill

Rosewill RNX-N300 Bedienungsanleitung

Rosewill

Rosewill RC214 Bedienungsanleitung

Rosewill

Rosewill RC-NIC412 Bedienungsanleitung

Rosewill

Rosewill RC-100 Bedienungsanleitung

Rosewill

Rosewill RC210 Bedienungsanleitung

Rosewill

Rosewill RC-401 Bedienungsanleitung

Rosewill

Rosewill RNX-N300 Bedienungsanleitung

Beliebte PCI-Karte Handbücher anderer Marken

ERMA

ERMA SSI 1417 Bedienungsanleitung

SIIG

SIIG CyberSerial Dual PCI Montageanleitung

I-Bus

I-Bus IBC2602 Bedienungsanleitung

Exsys

Exsys EX-60102 Bedienungsanleitung

Chelsio Communications

Chelsio Communications T5 Series Bedienungsanleitung

Conrad Electronic

Conrad Electronic 97 46 71 Bedienungsanleitung

Micro Innovations

Micro Innovations USB650A Bedienungsanleitung

KTI Networks

KTI Networks KF-310 Bedienungsanleitung

Asus

Asus SpaceLink WL230 Bedienungsanleitung

SIIG

SIIG SC2475 Bedienungsanleitung

TRENDnet

TRENDnet TEW-703PI Bedienungsanleitung

Belkin

Belkin F5D7000F Bedienungsanleitung

Pericom

Pericom PI7C7100 Bedienungsanleitung

ADLINK Technology

ADLINK Technology cPCI-3548 Bedienungsanleitung

Digium

Digium TE200 Series Bedienungsanleitung

Allo.com

Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung

Western Digital

Western Digital FireWire PCI Adapter Bedienungsanleitung

Pyle

Pyle Gamelink PLINK1 Bedienungsanleitung