Ruijie RG-EG Series Installations- und Betriebsanleitung

Ruijie RG-EG Series Routers

Hardware Installation and Reference Guide

Ruijie Networks reserves all copyrights of this document. Any reproduction, excerption, backup, modification,

transmission, translation or commercial use of this document or any portion of this document, in any form or by any means,

without the prior written consent of Ruijie Networks is prohibited.

Exemption Statement

This document is provided “as is”. The contents of this document are subject to change without any notice. Please obtain

the latest information through the Ruijie Networks website. Ruijie Networks endeavors to ensure content accuracy and will

not shoulder any responsibility for losses and damages caused due to content omissions, inaccuracies or errors.

Preface

Thank you for using our products. This manual will guide you through the installation of the device.

This manual describes the functional and physical features and provides the device installation steps, hardware

troubleshooting, module technical specifications, and specifications and usage guidelines for cables and connectors.

Audience

It is intended for the users who have some experience in installing and maintaining network hardware. At the same time, it

is assumed that the users are already familiar with the related terms and concepts.

Obtaining Technical Assistance

Ruijie Networks Website: https://www.ruijienetworks.com/

Technical Support Website: https://ruijienetworks.com/support

Case Portal: https://caseportal.ruijienetworks.com

Community: https://community.ruijienetworks.com

Technical Support Email: [email protected]

Skype: [email protected]

Related Documents

Documents

Description

Configuration Guide

Describes network protocols and related mechanisms that supported by the

product, with configuration examples.

Command Reference

Describes the related configuration commands, including command modes,

parameter descriptions, usage guides, and related examples.

Symbol Conventions

Means reader take note. Notes contain helpful suggestions or references.

Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of

data.

Ruijie RG-EG Series Routers Hardware Installation and Reference Guide Product Overview

1 Product Overview

Featured with global-leading semiconductor technologies and communication control technologies, Ruijie EG series router

is a data communication product developed by Ruijie Networks with independent intellectual property right. The EG series

router is designed according to international standards, similar to the mainstream router products in the international market.

By reading this manual, a network administrator familiar with mainstream router configuration commands can use this

device without training.

1.1 RG-EG105G-P

Specifications

Model

RG-EG105G-P

Storage

DDR2 SDRAM: 128MB

ROM: 16MB

Power Module

External 60W power adapter

Interface Standard

Ethernet: 10Base-T/100Base-TX/1000Base-TX

Dimension (without

rubber pads)

(W x H x D)

206.5 mm x 28 mm x 108.5 mm (8.13 in. x 1.1 in. x 4.27 in.)

Voltage

100V to 240V~, 50/60Hz, 1.5A max.

Power Consumption

Less than 60W (With PoE)

PoE

IEEE 802.3af/at, 54W max. output

Working

Temperature

0°C to 40°C (32°F to 104°F)

Working Humidity

10% to 90% RH (non-condensing)

Please avoid the vibration and collision in the process of moving and usage.

Products should be transported in original package.

RG-EG105G-P is a Class-A product which may cause radio interference in the living environment. In such a case, the

user may need to take feasible measures against such interference.

Appearance

Figure 1-1 Front Panel of RG-EG105G-P

Figure 1-2 Back Panel of RG-EG105G-P

Ruijie RG-EG Series Routers Hardware Installation and Reference Guide Product Overview

Interface

Description

WAN

1 WAN port, used to connect to the DSL/Cable modem for Internet access.

LAN

4 LAN ports, used to connect the computer to the switch or access point (AP).

The LAN3 port can be used as a WAN port via the Web configuration.

LED Indicator

Description

Status

Blinking green (0.5Hz): The device has started up, but is not connected to the

Ruijie Cloud.

Solid green: The device has started up, and is connected to the Ruijie Cloud.

Blinking green (10Hz): The device is starting up/shutting down, or PoE overload

occurs.

Link/ACT

Solid green: the port is up.

Blinking green: data is being transceived on the port.

Button

Description

Reset

Press reset button until the status LED blinks green at 10Hz to restore the

device to the factory default setting.

The default management IP address is http://192.168.110.1.

1.2 RG-EG105G

Specifications

Model

RG-EG105G

Storage

DDR2 SDRAM: 128MB

ROM: 16MB

Power Module

External 12W power adapter

Interface Standard

Ethernet: 10Base-T/100Base-TX/1000Base-TX

Dimension (without

rubber pads)

(W x H x D)

206.5 mm x 28 mm x 108.5 mm (8.13 in. x 1.1 in. x 4.27 in.)

Ruijie RG-EG Series Routers Hardware Installation and Reference Guide Product Overview

Voltage

100V to 240V~, 50/60Hz, 1.5A max.

Power Consumption

Less than 6W

Working

Temperature

0°C to 40°C (32°F to 104°F)

Working Humidity

10% to 90% RH (non-condensing)

Please avoid the vibration and collision in the process of moving and usage.

Products should be transported in original package.

RG-EG105G is a Class-A product which may cause radio interference in the living environment. In such a case, the

user may need to take feasible measures against such interference.

Appearance

Figure 1-3 Front Panel of RG-EG105G

Figure 1-4 Back Panel of RG-EG105G

Interface

Description

WAN

1 WAN port, used to connect to the DSL/Cable modem for Internet access.

LAN

4 LAN ports, used to connect the computer to the switch. The LAN3 port can be

used as a WAN port via the Web configuration.

LED Indicator

Description

Status

Blinking green (0.5Hz): The device has started up, but is not connected to the

Ruijie Cloud.

Solid green: The device has started up, and is connected to the Ruijie Cloud.

Blinking green (10Hz): The device is starting up/shutting down.

Link/ACT

Solid green: the port is up.

Blinking green: data is being transceived on the port.

Ruijie RG-EG Series Routers Hardware Installation and Reference Guide Product Overview

Button

Description

Reset

Press reset button until the status LED blinks green at 10Hz to restore the

device to the factory default setting.

The default management IP address is http://192.168.110.1.

1.3 RG-EG105GW

Specifications

Model

RG-EG105GW

Storage

DDR3 SDRAM: 128MB

ROM: 16MB

Power Module

Built-in power module

Interface Standard

Ethernet: 5 x 10Base-T/100Base-TX/1000Base-TX ports (4 LAN ports and 1 WAN port by

default)

1 USB2.0 port

Transmission

Protocol

Concurrent 802.11b/g/n and 802.11a/n/ac.

Operating Bands

802.11b/g/n: 2.4GHz to 2.483GHz

802.11a/n/ac: 5.15GHz to 5.35GHz, 5.47GHz to 5.725GHz, 5.725GHz to 5.85GHz

(Country-Specific)

Max Throughput

2.4G: up to 450Mbps

5G: up to 867Mbps

Up to 1.317Gbps per device

Transmit Power

27dBm (2.4G) + 25dBm (5G)

(Country-Specific)

Dimension (without

rubber pads)

(W x H x D)

250 mm x 42 mm x 174 mm (9.84 in. x 1.65 in. x 6.85 in.)

Voltage

100V to 240V~, 50/60Hz, 0.6A max.

Power Consumption

Less than 21W

Working

Temperature

0°C to 40°C (32°F to 104°F)

Working Humidity

10% to 90% RH (non-condensing)

Please avoid the vibration and collision in the process of moving and usage.

Products should be transported in original package.

Since there are numerous types of U-disk, we cannot ensure that the system supports all of them. The Kingston and

SanDisk U-disk with FAT 32 are recommended to be used.

Appearance

Ruijie RG-EG Series Routers Hardware Installation and Reference Guide Product Overview

Figure 1-5 Front Panel of RG-EG105GW

Figure 1-6 Back Panel of RG-EG105GW

Ruijie RG-EG Series Routers Hardware Installation and Reference Guide Product Overview

Interface

Description

WAN

1 WAN port, used to connect to the DSL/Cable modem for Internet access.

LAN

4 LAN ports, used to connect the computer to the switch. The LAN3 port can be

used as a WAN port via the Web configuration.

LED Indicator

Description

SYS

Blinking green (0.5Hz): The device has started up, but is not connected to the

Ruijie Cloud.

Solid green: The device has started up, and is connected to the Ruijie Cloud.

Blinking green (10Hz): The device is starting up/shutting down.

Speed

Solid green: the port is connected at 10/100/1000 Mbps.

Off: the port is not connected at 10/100/1000 Mbps.

Button

Description

Reset

Press reset button until the status LED blinks green at 10Hz to restore the

device to the factory default setting.

The default management IP address is http://192.168.110.1.

1.4 RG-EG210G-P

Specifications

Model

RG-EG210G-P

Storage

DDR3 SDRAM: 256MB

ROM: 16MB

Power Module

External 80W power adapter

Interface Standard

Ethernet: 10Base-T/100Base-TX/1000Base-TX

Dimension (without

rubber pads)

(W x H x D)

202 mm x 28 mm x 108 mm (7.95 in. x 1.1 in. x 4.25 in.)

Voltage

100V to 240V~, 50/60Hz, 1.5A max.

Power Consumption

Less than 80W (With PoE)

PoE

IEEE 802.3af/at, 70W max. output

Working

Temperature

0°C to 40°C (32°F to 104°F)

Ruijie RG-EG Series Routers Hardware Installation and Reference Guide Product Overview

Working Humidity

10% to 90% RH (non-condensing)

Please avoid the vibration and collision in the process of moving and usage.

Products should be transported in original package.

RG-EG210G-P is a Class-A product which may cause radio interference in the living environment. In such a case, the

user may need to take feasible measures against such interference.

Appearance

Figure 1-7 Front Panel of RG-EG210G-P

Figure 1-8 Back Panel of RG-EG210G-P

Interface

Description

WAN

1 WAN port, used to connect to the DSL/Cable modem for Internet access.

LAN

9 LAN ports, used to connect the computer to the switch or access point (AP).

The LAN8 port can be used as a WAN port via the Web configuration.

LED Indicator

Description

Status

Blinking green (0.5Hz): The device has started up, but is not connected to the

Ruijie Cloud.

Solid green: The device has started up, and is connected to the Ruijie Cloud.

Blinking green (10Hz): The device is starting up/shutting down, or PoE overload

occurs.

Link/ACT

Solid green: the port is up.

Blinking green: data is being transceived on the port.

Button

Description

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ruijie Netzwerk-Router Handbücher

Ruijie

Ruijie Reyee RG-EG210G-E Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EW Series Bedienungsanleitung

Ruijie

Ruijie Reyee RG-EG300GH-E Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EG209GS Installations- und Betriebsanleitung

Ruijie

Ruijie RSR10-01G-T-I Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-EG210G-E Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-NBR-E Series Bedienungsanleitung

Ruijie

Ruijie RG-RSR77-XA Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EW1200 Bedienungsanleitung

Ruijie

Ruijie RSR10-01G Montageanleitung

Ruijie

Ruijie Reyee RG-EG Series Bedienungsanleitung

Ruijie

Ruijie RSR30-X-SPU10 Installations- und Betriebsanleitung

Ruijie

Ruijie RG-RSR10-02E Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-NBR-E Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EG V2 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RSR10 Series Montageanleitung

Ruijie

Ruijie RG-MTFi-M520 Bedienungsanleitung

Ruijie

Ruijie RG-RSR20-XA Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EW3000GX PRO Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EW1200G PRO Bedienungsanleitung

Ruijie

Ruijie RG-RSR20-14E Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EW3200GX PRO Bedienungsanleitung

Ruijie

Ruijie Reyee RG-EW1300G Bedienungsanleitung

Ruijie

Ruijie RG-RSR77 Series Installations- und Betriebsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung