Sirius Satellite Radio SM923 520 Bedienungsanleitung

SM923 - SM924

RANGEHOOD INSTALLATION INSTRUCTIONS

Congratulations on your purchase!

Thank you for choosing a Sirius product.

SM923 520 EAN #9351116002473

SM923 700 EAN #9351116002480

SM923 850 EAN #9351116002497

SM924 520 EAN #9351116002510

SM924 780 EAN #9351116002527

SM924 850 EAN #9351116002541

SM924 850 BK EAN #9351116002640

www.siriusbrand.com

The symbol on the product or on its packaging indicates that this product

may not be treated as house-hold waste. Instead it shall be handed

over to the applicable collection point for the recycling of electrical and

electronic equipment. By ensuring this product is disposed of correctly,

you will help prevent potential negative consequences for the environment

and human health, which could otherwise be caused by inappropriate

waste handling of this product. For more detailed information about

recycling of this product, please contact your local city office, your

household waste disposal service or the shop where you purchased the

product. This appliance is marked according to the European directive

2002/96/EC on waste electrical and electronic equipment (WEEE).

BEFORE YOU INSTALL – please read

Sirius warranty covers only Sirius product. If you choose to install a non-Sirius branded accessory

such as flexible ducting, Sirius will only warrant the hood and motor. If installation is found to be

the cause of failure or issue then charges will apply for service and parts.

Flexible ducting is not permitted under any circumstances. Flexible ducting has been

found to increase noise levels, increase vibration and reduce airflow.

Sirius Semi-rigid or solid ducting can be used in lieu.

There is a range available to suit any application.

Ducting available at www.siriusbrand.com

6 Year Warranty when Sirius Ducting is used. Full replacement warranty on parts and labour.

See website for terms & conditions.

A reduction in the duct diameter from stated ducting size will void warranty.

If you are in doubt about the ducting, please contact Sirius on 1300 762 219 prior to installation

CAUTION

WARNING

The appliance must be installed and

connected to the power supply only by a

qualified technician.

• There shall be adequate ventilation of the room when the range hood is used at the same time as

appliances burning gas or other fuels (not applicable to appliances that only discharge the air back into the

room)

• The details concerning the method and frequency of cleaning

• There is a fire risk if cleaning is not carried out in accordance with the instructions;

• Do not flambé under the range hood;

• CAUTION: Accessible parts may become hot when used with cooking appliances.

INSTALLATION AND DUCTING

SM 923

Arisit

285

SM923

SM924

Underside

shown

Underside

shown

Min. 600mm - Max. 700mm for induction cooktops.

Min. 650mm - Max. 750mm gas cooktops.

If the rangehood is positioned above the max height

recommended, warranty may be compromised

as performance of the rangehood will be affected.

Measurement is taken from the top of the trivets to

the underside of the hood. (Fig.1)

• The air being drawn can’t be conveyed through

or into a duct used to let out fumes from

appliances fed by energy other than electric

power (eg. centralized heating, radiators, water

heaters, etc.).

• Attention: remove any possible PVC film from the

stainless steel, including the filters.

• To externally vent, please comply with the

pertaining rules given by competent authorities.

• Provide the room with an adequate ventilation

when a rangehood and appliances fed by energy

other than electric power (gas, oil, or coal stoves,

etc.) are used simultaneously. The rangehood,

when evacuating the air, could generate a

negative pressure in the room which can’t exceed

the limit of 0.04 mbar, in order to avoid the

suck of exhausts deriving from the heat source.

Therefore the room should be provided with air

intakes to allow a constant flow of fresh air.

If the rating label in the rangehood shows the symbol

, the appliance is built in class II° and it does not

need any earth connection.

If the rating label in the rangehood does not show

the symbol , the appliance is built in class I° and it

needs the earth connection.

When performing the electrical connections on the

appliance, please make sure that the current-tap

is provided with earth connection and that voltage

values correspond to those indicated on the label

placed inside the appliance itself.

Before carrying out any cleaning or maintaining

operations, the appliance needs to be switched off.

If the appliance is not provided with a non-separable

When ducting rangehood, options are as follows:

Roof vent - EASYROOF 150T/M

*Kit includes roof flashing

Download installation guide

Eave vent - EASYEAVE 150

Download installation guide

Wall vent - EASYWALL 150

Download installation guide

flexible cable and plug, or with another device

ensuring omnipolar disconnections from the grid,

with an opening distance between the contacts of at

least 3mm, then such disconnecting devices must be

supplied within the fixed installation.

If the fixed appliance is endowed with a supply cord

and a plug, the appliance has to be put in a place

where the plug can be reached easily.

The use of materials which can burst into flames

should be avoided in close proximity of the appliance.

When frying, please pay particular attention to fire

risk due to oil grease. Being highly flammable, fried

oil is especially dangerous. Do not use uncovered

electric grills. In order to avoid possible fire risk, all

instructions for grease-filter cleaning and for removing

eventual grease deposits should be strictly followed.

WARNING

600 - 700mm (induction)

650 - 750mm (gas)

600 - 700mm (induction)

650 - 750mm (gas)

(Fig. 1)

(Fig. 2a)

(Fig. 2b)

(Fig. 2c)

SIDE VIEW FRONT VIEW

To install the appliance please respect the follow

instructions:

• The appliance must be installed by qualified

technicians, or where possible use a Sirius

recommended installer. See siriusbrand.com. In

order to avoid damage to the electronic parts

of the appliance, please do not use additional

screws.

• Essential precautions to respect before installing

the appliance are the following:

To have made a cutout on the bottom of the

cabinet which is suitable to hold the appliance in

position (fig. 4):

SM923 52 - 505 x 270mm

SM923 70 - 685 x 270mm

SM923 85 - 835 x 270mm

SM924 52 - 510 x 270mm

SM924 78 - 765 x 265mm

SM924 85 - 835 x 265mm

SM923 and SM924 INSTALLATION

Before installing the appliance, make sure that

none of the parts are damaged in any way. In

case of damaged parts, contact your retailer

and do not proceed with installation. Read all

of the following instructions with care before

installing the appliance.

• Use ducting within the min/max specifications

• Limit the number of ducting bends.

• Do not make any changes in ducting diameter

(recommended constant diameter: Ø 150 mm

or equal surface area).

Before installing the appliance - in order not to

damage the appliance itself - the metal grease filter

should be removed. These filters could be removed

by pushing the handles towards the back side of the

rangehood and pulling it downwards to unfasten it

from its slot. (Fig.1).

NOTE

(Fig.1)

(Fig.4)

1. Prepare the power supply - 240 volts.

2. Prepare a hole for the exhaust - 160mm diameter.

• Do not use screws to fix the ducting to the

rangehoods as they will prevent the movement of

non-return valves.

• Limit the number of elbows in the ducting, since

each elbow reduces the duct efficiency by 1

metre. (i.e. if you use two 90° elbows, the length

of ducting must not exceed 5 metres.)

• Avoid abrupt direction changes.

• Use 150mm constant diameter ducting for the

whole length.

• The use of Sirius ducting will increase the

warranty of the unit to 6 years.

WARNING: Failure to install the screws or fixing

device in accordance with these instructions

may result in electrical hazards.

WARNING

(Fig.5)

(Fig.6)25mm screw

27mm

The rangehood is quite heavy, so two people

will be needed for installation.

1. To install the appliance, adjust the position of the

adjustable side-springs using the supplied screws

(fig.5), according to the thickness of the board, in

which the appliance will be fixed.

2. Insert the rangehood into the cutout in the

cabinet until the stop click of the side-springs is

heard and the rangehood is supported.

3. Insert the 25mm screws provided into the front

and rear holes inside the rangehood (Fig.6) to fix

it to cabinetry.

4. Insert the grease channel.

5. Insert the grease filter (Fig.3b)

1. Drill 4 additional holes to the inside sides of the

rangehood body.

2. Secure the rangehood body with appropriately-

sized screws.

3. After the four screw are installed and the filters

replaced, the installation is now complete.

ALTERNATIVE METHOD OF

INSTALLATION

WARNING

Before connecting the ducting to the motor, make

sure the stop valve, which is on the air outlet of the

motor, can swing.

Ducted version

Connect the flange to the ducting outlet with

appropriate ducting. Connect the appliance with the

electrical mains through the supply cord.

Recirculating version (SM923 models only)

Connect the flange with ducting suitable to convey

the air to the top of the cabinet.

Connect the appliance with the electrical mains

through the supply cord.

Rangehood

model

Filters needed

and quantity Part number

SM 923 52 1 x KF52 SPS-60070923001

SM 923 70 2 x KF9 SPS-60079999999

SM 923 85 2 x KF9 SPS-60079999999

To remove the rangehood from the cabinet,

remove the fixing screws (fig. 6) using a

screwdriver, and remove the grease filters

(fig.3).

• Push down on the small handle of the springs,

which are inside the rangehood, with the

necessary strength to unhook the hood from the

cabinet.

If the supply cord is damaged, it must be

replaced by the manufacturer or its service

agent or a similarly qualified person in order to

avoid a hazard.

REPLACING THE LED LIGHT ON THE

SM923 or SM924

1. Before replacing the LED light, switch off the

rangehood, then - by using appropriate tools -

remove the LED light from its slot (fig.12).

2. Take out the LED light from its connector and

replace.

• To find the correct LED light, please contact Sirius

directly on our toll-free number: 1300 762 216.

• Accurate maintenance guarantees good

functioning and long-lasting performance.

• Particular care is due to the grease filter panel. It

can be removed by pushing its handle toward the

back side of the rangehood and pulling the filter

downwards so to unfasten it from its slot (Fig.3).

To insert the filter just perform the opposite

operation.

• The grease filter needs cleaning by regular

handwashing or in dishwashers every two

months or 30 continuous hours, depending on its

use. Button lights will flash when filter needs to

be cleaned. To reset, press and hold the the 01

button for 2 seconds when the motor is off.

Filters may require cleaning sooner if

frequent heavy frying is done.

MAINTENANCE

WARNING

NOTE

SM923 and SM924 (fig. 11)

A: Motor switch on speed 1/off - (low/simmer)

B: Motor switch on speed 2 - (general cooking)

C: Motor switch on speed 3 - (high power)

D: Motor switch on speed 4 - (booster)

E: Light on/off switch

OPERATION

(Fig.12)

(Fig.11)

• NB: light is easier to remove from centre of

LED globe. Use a small, flathead screwdriver

(pictured), pallette knife or blunt butter knife.

• To clean the appliance itself, water and detergent

are recommended, while abrasive products

should be avoided. For steel appliances

specialized detergents are recommended (please

follow the instructions indicated on the product

itself to obtain the desired results).

WIRING DIAGRAM

ARISIT PTY LIMITED (Australia)

ABN 23 091 515 294

40-50 Mark Anthony Drive

Dandenong South VIC 3175

P: Sales & Service: 1300 762 219

F: Sales & Service: (03) 9768 0838

E: [email protected]

ARISIT PTY LIMITED (New Zealand)

1A Howe Street Newton, Auckland 1145

PO Box 68-140 Newton, Auckland 1145

P: (09) 306 1020 - Fax: (09) 302 0077

E: [email protected]

Sirius Hoods and ducting products are only available

from our select group of Sirius Professional Stockists

nationwide. For the latest list of Sirius Stockists

near you, please refer to www.siriusbrand.com

All efforts have been made to ensure that the

information provided in this brochure is correct at

the time of printing. Due to continuous product

improvement and ongoing development, Sirius

reserves the right to make changes to the

products and technical data without prior notice.

Some products appearing in this brochure may

be for illustrative purposes only. Diagrams are

indicative measures only. Prior to commencing

cabinetry cutouts the operating/installation

instructions accompanying the product must

be referred to at www.siriusbrand.com

www.arisit.com

www.arisitwarranties.com.au

www.siriusbrand.com

when Sirius ducting is used.

Full replacement warranty on parts and labour. Check website for T&Cs.

Year

Warranty

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sirius Satellite Radio Dunstabzugshaube Handbücher

Sirius Satellite Radio

Sirius Satellite Radio ALFRESCO SLEM80 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio S900 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SLT966 Kurzanleitung

Sirius Satellite Radio

Sirius Satellite Radio Valentina Series Bedienungs- und Wartungshandbuch

Sirius Satellite Radio

Sirius Satellite Radio SL906 Series Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SU1 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SLTC919 520 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio Essence S-DD 16 Kurzanleitung

Sirius Satellite Radio

Sirius Satellite Radio SL906 L 1500 Kurzanleitung

Sirius Satellite Radio

Sirius Satellite Radio SL926DLTM Series Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio STL969 Bedienungs- und Wartungshandbuch

Sirius Satellite Radio

Sirius Satellite Radio SLT972 EM WIFI Kurzanleitung

Sirius Satellite Radio

Sirius Satellite Radio UP right Kurzanleitung

Sirius Satellite Radio

Sirius Satellite Radio SUT950 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SUT958 H200 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SLT950 EM Kurzanleitung

Sirius Satellite Radio

Sirius Satellite Radio ALFRESCO SL83 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SL920 FRESCO Series Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SL85 Kurzanleitung

Sirius Satellite Radio

Sirius Satellite Radio SIL-EM490X Kurzanleitung

Sirius Satellite Radio

Sirius Satellite Radio SLT976 Kurzanleitung

Sirius Satellite Radio

Sirius Satellite Radio SU900 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SLT972 Kurzanleitung

Sirius Satellite Radio

Sirius Satellite Radio SILT-26 Series Kurzanleitung

Beliebte Dunstabzugshaube Handbücher anderer Marken

emmeti

emmeti RECUPA MED A-140 Leitfaden

Nibe

Nibe F135 Bedienungsanleitung

Zephyr

Zephyr Spruce AK9834BS Installationsanleitung

Kuppersberg

Kuppersberg INTRO 60 Montage- und Wartungsanleitung

Hisense

Hisense MH6INBG Bedienungsanleitung

Miele

Miele DA 1255 Bedienungsanleitung

Broan

Broan 46000 Bedienungsanleitung

GE Profile PV977 Originalbetriebsanleitung

FALMEC

FALMEC FFRIA24W5FS Bedienungsanleitung

Whirlpool

Whirlpool RH2600XL-1 SERIES Bedienungsanleitung

ETNA

ETNA AV360RVS Bedienungsanleitung

JUNO

JUNO JDF603E6 Bedienungsanleitung

Miele

Miele DA 6708 D Bedienungsanleitung

Tricity Bendix

Tricity Bendix LE 150 Handbuch

AEG

AEG X68163BV1 Bedienungsanleitung

AEG

AEG 125 D Bedienungsanleitung

Smeg

Smeg KSEV97X Bedienungsanleitung

Nibe

Nibe S Series Benutzerhandbuch