Teledyne Lecroy 280 Bedienungsanleitung

280 Test Set –Quick Start Guide Page 1

May 11, 2018

Revision 5

280 Test Set Video Generator / Analyzer

Quick Start Guide

Rev: 5

280 Test Set –Quick Start Guide Page 2

May 11, 2018

Revision 5

Table of Contents

1Overview of the 280G & 280A Test Set 4

1.1 Updates to This Guide 5

1.2 What is in the 280 Test Set Shipping Box 5

2Physical Interfaces of the 280 Test Set for HDMI & HDBaseT 6

2.1 Video Interfaces 6

2.2 Administrative Interfaces 7

2.3 Audio Jacks 8

3General Operation 9

3.1 Power Considerations 9

3.2 Convenient Handle 10

3.3 Touch Screen User Interface 11

280G User Interface 11

280A User Interface 12

4Using the 280G to Run Video and Audio Tests on Displays and TVs 14

4.1 Making Physical Connections 14

Connecting the 280G to the Display Device 14

4.2 Selecting a Signal Type and Resolution 16

Selecting Video Formats 16

Selecting an HDMI Resolution and Frame Rate 17

4.3 Rendering Test Patterns on a UHDTV 21

Rendering Test Patterns on an HDTV 21

4.4 Testing Digital Audio on an HDTV or A/V Receiver 23

Connecting the 280G to the Audio Rendering Device 23

Testing with Programmable Sine Waves 23

4.5 Testing HDCP on an HDMI HDTV or HDMI Repeater Device 26

Testing HDCP on an HDMI Sink Device 26

4.6 Verifying the EDID on an HDMI HDTV or HDMI Repeater Device 28

Testing and Viewing the EDID on an HDMI Sink Device 28

5Using the 280A Video Analyzer to Test HDMI and HDBaseT Source Devices 31

5.1 Testing Video from an HDMI or HDBaseT Source Device 31

Connection Configurations for Testing HDMI Source Devices 31

5.2 Viewing the Video and Video Parameters from an HDMI or HDBaseT Source Device 32

5.3 Testing Audio of an HDMI Source Device 34

5.4 Testing an HDMI Source’s Response to an EDID 36

Configurations for Testing an HDMI Source Devices Response to an EDID 36

Testing an HDMI Source Devices Response to an EDID 37

Loading additional EDIDs for testing 38

6Using the 280 Test Set to Verify a Video Distribution Network End to End 42

6.1 End to End Verification Testing 42

Configurations for Running an End to End Network Verification Test 42

280 Test Set –Quick Start Guide Page 3

May 11, 2018

Revision 5

Selecting Video Formats 43

Verifying the video through the network 44

Verifying HDCP through the network 46

Verifying the EDID through the network 47

Verifying audio through the distribution network 48

6.2 Running an HDMI Cable Test 50

6.3 HDBaseT Cable Test 51

Configuration for Running an HDBaseT Cable Test 51

7Generating Reports with the Reports File Creation Feature 54

7.1 Report File Creation Feature Description 54

7.2 Procedures for Creating Reports 54

8Upgrading the Software on Your 280 Units 61

280 Test Set –Quick Start Guide Page 4

May 11, 2018

Revision 5

1 Overview of the 280G & 280A Test Set

Important Note: Please check the quantumdata 280 webpage for updates to this Quick Start Guide.

The 280 Test Set is a battery-powered, portable Video Generator and Analyzer set that enables you to conduct quick, on-

site verification testing of your HDMI and HDBaseT devices, cables and entire distribution networks. The 280 Test Set is

comprised of:

280G Video Generator - Provides HDMI Tx port operating up to 18Gbps (600MHz) and an HDBaseT Tx port

operating up to 300MHz pixel rate.

280A Video Analyzer - Provides HDMI Rx port operating up to 18Gbps (600MHz) and an HDBaseT Rx port operating

up to 300MHz pixel rate.

Because the 280 instruments have both HDMI and HDBaseT outputs and HDMI and HDBaseT inputs, you can test your

HDMI and HDBaseT cables and systems with splitters, extenders and switches whether in your lab or installed on-site.

280G Video Generator 280A Video Analyzer

280G/A Bottom Edge 280G/A Top Edge

280 Test Set –Quick Start Guide Page 5

May 11, 2018

Revision 5

1.1 Updates to This Guide

This 280 Test Set Quick Start Guide has been updated to depict support for the HDMI HDR mode and the HDBaseT Long

Reach mode.

1.2 What is in the 280 Test Set Shipping Box

The 280 Test Set shipping container includes the items listed in Table 1-1 below:

Table 1-1: 280 Test Set Shipping Box Contents

Item Description

280 Test Set for HDMI and HDBaseT:

- 280G Video Generator (can be ordered separately)

- 280A Video Analyzer (can be ordered separately)

12V DC (5 amp) Power Supply / Adapter / Charger.

Line cord for 12V Power Supply. (Qty Two (2) one for each 280 device)

Quick Start Guide.

280 Test Set –Quick Start Guide Page 6

May 11, 2018

Revision 5

2 Physical Interfaces of the 280 Test Set for HDMI & HDBaseT

This Chapter describes the administration, video and audio interfaces on the 280 Test Set units:.

2.1 Video Interfaces

Tables 2-1 and 2-2 below describes the video interfaces on the 280 Test Set, these interfaces are used to test consumer

electronic devices.

280G/A Top Edge

Table 2-1: 280G Video Interfaces

Video Interface

Description

HDMI (1) Output Type A

Single HDMI output connector. Supports HDMI 2.0:

Bit Depth: 24/30/36 bit.

Colorimetry: RGB, YCbCr.

Sampling: 4:4:4, 4:2:2, 4:2:0

Pixel rate: 600MHz; Limited set of Timings up to 4K@60 with 4:4:4.

HDBaseT (1) Output RJ45

Single HDBaseT output connector:

Bit Depth: 24/30/36 bit.

Colorimetry: RGB, YCbCr.

Sampling: 4:4:4, 4:2:2, 4:2:0

Pixel rate: 300MHz; Limited set of Timings up to 4K@60 with 4:2:0.

Table 2-2: 280A Video Interfaces

Video Interface

Description

HDMI (1) Input Type A

Single HDMI input connector. Supports HDMI 2.0:

Bit Depth: 24/30/36 bit.

Colorimetry: RGB, YCbCr.

Sampling: 4:4:4, 4:2:2, 4:2:0

Pixel rate: 600MHz Timings up to 4K@60 with 4:4:4.

HDBaseT (1) Input RJ45

Single HDBaseT input connector. Supports HDMI 2.0:

Bit Depth: 24/30/36 bit.

Colorimetry: RGB, YCbCr.

Sampling: 4:4:4, 4:2:2, 4:2:0

Pixel rate: 300MHz Timings up to 4K@60 with 4:2:0.

HDMI

HDBaseT

280 Test Set –Quick Start Guide Page 7

May 11, 2018

Revision 5

2.2 Administrative Interfaces

Each 280 unit is equipped with a micro USB interface and a micro SD card slot. These interfaces are located on the

bottom edge of the 280G and the 280A as indicated in the illustration below:

The functions of the micro USB and the Micro SD card slot are described in the table below.

Table 2-3: 280G Administrative Interfaces

USB (micro) –Located on bottom edge

Used for command line interface. Not currently supported.

Micro SD slot –Located on bottom edge

Uses a micro SD or micro SDHC card

Used for file transfer:

- Upgrading the 280

- Transferring files such as EDID and Reports

Table 2-4: 280A Administrative Interfaces

USB (micro) –Located on bottom edge

Used for command line interface. Not currently supported.

Micro SD slot –Located on bottom edge

Uses a micro SD or micro SDHC card

Used for file transfer:

- Upgrading the 280

- Transferring files such as EDID and Reports

IMPORTANT NOTE ON MICRO SD CARD USAGE: The micro SD Card has to be inserted with the connector foils up as

shown below.

USB

SD Slot

280 Test Set –Quick Start Guide Page 8

May 11, 2018

Revision 5

2.3 Audio Jacks

There is a 3.5 mm analog audio jack on both the 280G and the 280A units. These audio jacks are located on the same

place on the bottom edge of the 280G and 280A chassis as shown below. The description and function of these jacks are

provided in the table below.

Table 2-4: 280G Audio Input Jack

Bottom Edge Panel

Description

3.5 mm analog audio input jack

Used for injecting audio into the outgoing HDMI or HDBaseT stream.

Table 2-5: 280A Audio Output Jack

Bottom Edge Panel

Description

3.5 mm analog audio output jack

Used for extracting audio to a speaker, headphone or ear buds.

280 Test Set –Quick Start Guide Page 9

May 11, 2018

Revision 5

3 General Operation

This section describes power up, power usage and general operation.

3.1 Power Considerations

The 280 Test Set has a rocker style power switch on the back panel. Refer to the photo below.

The 280G and 280A are portable battery powered test instruments. They are equipped with rechargeable batteries.

Typically, you can use the 280 instruments on batteries for about 4-6 hours after a full charge. Teledyne LeCroy

recommends that you set the screen brightness to the minimum level required. Turn the unit off when not in use.

The 280G and 280A are Test Set is supplied with a 12V DC power supply and charger with an associated line cord.

Important Notes about power usage and status:

Monitor the battery meter on the lower right.

A green indication or partial green indication shows the battery is being charged.

A blue color with an electrical charge icon indicates that the device is being powered through the wall charger.

Fully charge the 280 units overnight.

Do not continue using the 280 units from battery power when the battery meter indicates that the batteries are

exhausted.

The following screen shows a charging battery condition.

The following example shows a nearly charged battery condition while the unit is running on batteries.

280 Test Set –Quick Start Guide Page 10

May 11, 2018

Revision 5

The following example shows a low battery condition.

3.2 Convenient Handle

The 280 units have a handle for convenient carrying. This is depicted in the illustration below.

Inhaltsverzeichnis

Andere Teledyne Lecroy Messgerät Handbücher

Teledyne Lecroy

Teledyne Lecroy HVFO108 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy HDA125 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy PP011-1 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy Frontline NFC-F Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy HVD3000 Series Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy HVD3000 Series Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy PP009 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy Frontline Sodera LE Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy PP017 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy PCI Express Gen 4x8 OCuLink Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy Frontline X240 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveAce Lab 3 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy RP2060 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy ADP300 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy M41h Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy CP030 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveRunner 8000-R Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy Summit T3-8 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy ZD500 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy HVD3102 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy LabMaster LM 10-25Zi-A Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy PP016 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy 980 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy Everywhereyoulook DL02-HCM Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung