TOORX BRX RECUMBENT COMPACT Bedienungsanleitung

Ed: 02/17 Rev : 00

INSTRUCTION

PRODUCT OVERVIEW

Back Cushion

Seat

Handle Bar

Meter

Back Support

Hand Pause

Adjustment Knob

Tension Knob

Right Pedal

Top Cover

Right Cover

Left Cover

Front Stabilizer

Rear Stabilizer

Leveling Cap

Wheel

Left Pedal

Left Crank

End cap

THEFOLLOWINGTOOLS ARE INCLUDED

Wrench:

FOR ASSEMBLY

Allen Wrench (5mm) w/ Screwdriver:

HARDWARE IDENTIFICATION CHART

Figure No.

Description Qty

Carriage Bolt (M8*1.25*60mm)

Carriage Bolt (M8*1.2548 mm)

D7 Bolt, Button Head (M6* 40 mm) 4

D22 Acorn Nut (M8) 4

D23 Arc Washer (M8) 6

D24 Washer (M8) 6

D25

Nut M8 2

D1 Adjustment Knob 2

D18

Pull Pin

Place all parts from the box in a cleared area and position them on the floor in front of you.

Remove all packing materials from your area and place them back into the box. Do not

dispose of the packing materials until assembly is completed. Read each step carefully

before beginning.

STEP 1: Unfold the Rear Frame (A2) away from the Main Frame (A1). Locking the frame

assembly in unfold position by inserting the Pull PIN (D18) into the hole in the Rear

Frame (A2).

STEP2: Attach the Rear Stabilizer (A10), the one with Transport Wheels (B19), to the Rear

Frame (A2) with the wheels facing backward. Secure with Carriage Bolts

(M8*1.25*60mm) (D5), Acorn Nuts (M8) (D23), and Arc Washers (M8*1.25) (D22).

STEP 3: Attach the Front Stabilizer (A5) to the Main Frame (A1) with Carriage Bolts

(M8*1.25*60mm) (D22), Acorn Nuts (M8) (D23), and Arc Washers (M8*1.25) (D22).

STEP 4: Attach the Seat (B24) to the Seat Post (A6) with Nylock Nuts (M8) (D25) and Washer

(M8) (D24). Insert the Seat Post (A6) into the Main Frame (A1) and secure with the

Adjustment Knob (D50).

NOTE:

Make sure that the pin on the Adjustment Knob (D50) is inserted into one of the holes in Seat

Post (A6).

STEP 5: Attach the Back Frame ( A7) and Seat Post (A6) by using Carriage Bolt (M8*1.25*48mm)

(D8) and Washer (M8) (D24).

Attach the Back Cushion (B25) and Back Support (A9) by using Button Head Bolt (M8*40)

(D7) and Washer (M8) (D24).

STEP 6: Attach the Handrail (A8) to the Back Frame (A7) with Button Head Bolts (M8*40) (D7)

and Arc Washer (D23). Connecting the Hand Pulse Button Line (C25) and Hand Pulse

Middle Line (C24).

STEP7: Install Meter (C1) into the Meter Bracket (A14). Connecting the Hand Pulse Top Line

(C23) to the back of Meter (C1), And connect the Sensor (C13) and Connection

Wire( C2).

NOTE: Be careful not to damage the wires when attaching the Meter(C1).

STEP8: Lock and tight the Left Pedal (B27) and Right Pedal (B28) on the Left Crank (B29) and

Right Crank (B30) by using the Wrench.

OPERATIONAL INSTRUCITONS

USING THE FITNESS METER

MODE: This key lets you to select and lock on to a particular

function you want

SET(IF HAVE) :To set the values of time distance and calories when

not in scan mode

RESET/CLEAR (IF HAVE): The key to reset the value to zero by

pressing the key

FUNCTIONS:

SCAN:

Automatically scans each function of SPEED,

DISTANCE,TIME, ODOMETER, CALORIES and

PULSE. in sequence, display changes every six seconds.

Press and release the button until "SCAN" appears on the

display.

TIME:

Displays the time from one second up to 99:59 minutes

SPEED

Displays the current speed from zero to 999.9 KM per hour.

DISTANCE

Displays the distance from zero to 999.9 KM.

CALORIES:

Displays the calories burned from zero to 999.9 Kcal.

The calorie readout is an estimate for an average user. It should be used only as a

comparison between workouts on this unit.

ODOMETER

Displays the total accumulated distance you have traveled from zero to 9999 KM. The

total accumulated distance is retained when the meter is turned off.

PULSE:

Displays your pulse rate in beats per minute. To display pulse, select the PULSE MODE and

grasp the pulse sensors on the Desktop, one in each hand. The heart icon will begin flashing

when the ELECTRONIC METER senses your pulse. Your pulse will be displayed approximately

five (5) seconds after the heart icon is displayed. If the heart icon does not appear, relax your

grip or change your grip on the pulse sensors.

NOTE:

The meter will shut off automatically after four minutes of inactivity. All function values

will be kept. Press the button and hold it down for two seconds to reset all functions to zero, except

ODOMETER.

LOAD ADJUSTMENT

To increase the load, turn the Adjustment Knob (B32) clockwise.

To decrease the load, turn the Adjustment Knob (B32) counterclockwise.

SEAT ADJUSTMENT

Proper seat adjustment is important.

Turn the Adjustment Knob (D50) to loosen, then pull the

Adjustment Knob (D50) to release the pin. Slide the

Seat Post (A6) until the Seat (B24) is at the proper

height. Release the Adjustment Knob (D50) making

sure the pin catches in one of the holes of the Seat Post

(A6) and tighten the Adjustment Knob (D50).

Sit on the seat and place your feet on the pedals. You

should be able to move through a complete pedal stroke

without locking your knees or shifting your hips on the

seat. The seat is too close to the pedals if you have

more than as light bend in your knees at the bottom of

the pedal stroke. The seat is too far from the pedals if

you have to completely straighten your knees at the

bottom of the pedal stroke. Refer to the illustration.

CAUTION:

1. Do not attempt to adjust the seat while you are on the BIKE.

2. Always tighten the Adjustment Knob (D50) after

adjusting the seat to a new position.

STORAGE

• To store the BIKE, simply keep it in a clean dry place.

• To avoid damage to the electronics, remove the batteries before storing the BIKE for one year or more.

• Follow the illustrated process below to fold the BIKE.

Remove the Pull Pin (D18) from the Rear Frame (A2).Fold the Rear Frame (A2) close to the Main

Frame (A1) and lock it in folded position with the Pull Pin (D18). And, folding down the Back Cushion

(B25).

NOTE: Make sure the Pull Pin (D18) goes through the holes on both sides of the Rear Frame (A2)

and the tube on the Main Frame (A1).

The safety and integrity designed into the

BIKE

can only be maintained when the

BIKE

is regularly

examined for damage and wear. Special attention should be given to the following:

Adjust the Adjustment Knob (B32) and verify that it functions properly and the resistance changes.

Use a wrench to verify that the pedals are tightened securely. If tightening is required, remember that

the left pedal has left hand threads and is tightened by turning counterclockwise.

Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts.

Tighten loose nuts and bolts.

It is the sole responsibility of the user/ owner to ensure that regular maintenance is performed.

Worn or damaged components shall be replaced immediately or the BIKE removed from service

until repair is made.

Keep your BIKE clean by wiping it off with an absorbent cloth after use.

OCO

ACTCUS

OMERSERVICE

PRODUCT PARTS DRAWING

Inhaltsverzeichnis

Andere TOORX Fitnessgeräte Handbücher

TOORX

TOORX ERX90 Bedienungsanleitung

TOORX

TOORX TRX 9000 EVO TFT Bedienungsanleitung

TOORX

TOORX ERX900 TFT Bedienungsanleitung

TOORX

TOORX WBX40 Bedienungsanleitung

TOORX

TOORX Rower Force Bedienungsanleitung

TOORX

TOORX MSX 60 Bedienungsanleitung

TOORX

TOORX ERX70 Bedienungsanleitung

TOORX

TOORX BRXOffice Compact Bedienungsanleitung

TOORX

TOORX ERX900 Bedienungsanleitung

TOORX

TOORX MSX-300 Bedienungsanleitung

TOORX

TOORX TRX 9500 Bedienungsanleitung

TOORX

TOORX Chrono Line RWX500 Bedienungsanleitung

TOORX

TOORX WLX80 Bedienungsanleitung

TOORX

TOORX Professional Line WBX4000 Bedienungsanleitung

TOORX

TOORX TRX 65 S Bedienungsanleitung

TOORX

TOORX BRX3000 Bedienungsanleitung

TOORX

TOORX MSX3000 Bedienungsanleitung

TOORX

TOORX RowerCompact Bedienungsanleitung

TOORX

TOORX WBX-250 Bedienungsanleitung

TOORX

TOORX CLX-9000 Bedienungsanleitung

TOORX

TOORX BRX R9500 Bedienungsanleitung

TOORX

TOORX BRX R300 ERGO Bedienungsanleitung

TOORX

TOORX WBX-2400 Bedienungsanleitung

TOORX

TOORX BRX55 Bedienungsanleitung

Beliebte Fitnessgeräte Handbücher anderer Marken

NSD

NSD PB-188P Bedienungsanleitung

Performance

Performance HyperVibe Bedienungsanleitung

Scalamobil

Scalamobil S27 Bedienungsanleitung

Precor

Precor Experience Series Bedienungsanleitung

FYTTER

FYTTER RedMIUM BENCH BE-T6R Bedienungsanleitung

Taurus

Taurus TF-RK1312 Bedienungsanleitung

Nustep

Nustep T5 Bedienungsanleitung

Precor

Precor CW-507 Bedienungsanleitung

Movement

Movement BICEPS Idea Bedienungsanleitung

Kegel8

Kegel8 V For Men Bedienungsanleitung

BLK BOX

BLK BOX 21-0122-0B Bedienungsanleitung

Stamina

Stamina aeropilates premier 299 Bedienungsanleitung

SPORTSTECH

SPORTSTECH PBX300 Bedienungsanleitung

ParaBody

ParaBody Serious Steel 877102 Bedienungsanleitung

Weslo

Weslo Gym 650 Bedienungsanleitung

Rebel

Rebel ACTIVE RBA-1011 Bedienungsanleitung

4iiii

4iiii FLiiiight Bedienungsanleitung

Image

Image 540 Bedienungsanleitung