TOORX ERX900 TFT Bedienungsanleitung

Ed : Rev : Cod:

INSTRUCTION

03/22 GRLDTOORXERX900T01

Main frame

Console supporting

tube

E1 Handle bar (L)

E2 Handle bar (R)

ABFront stabilizer

Rear stabilizer

Central supporting tubeF

Console (G1)

&Console cover (G2)

Adaptor

Console supporting

tube cover (L&R)

L(A8) R(A9)

Pedal supporting tube

cover (L1&L2),(R1&R2)

L1(A72) L2(A73)

R1(A75)

R2(A74)

Front pedal supporting

tube cover

(A66)

(A67)

(F4) Screw M8

(F2) Screw M8x65 (A107) Bolt Ø15x50.5

TOOL

M6x2

(F3) Washer M8

(A78) Screw M3x20

(A62) Spring washer M8

(A61) Washer M8

(A63) Screw M8x20

FRONT STABILIZER (B) ASSEMBLY

CONSOLE SUPPORTING TUBE (D) ASSEMBLY

USE TOOL:6m/m

B3 B4

B5A

Step 1. Remove the three preassembled screws (D2) from the console supporting tube (D).

Step 2. Connect console wire (K1&K2).

Step 4. Use two hands to hold small handle bar to lift up the main frame (A). then finish the

screw (D2-middle) assembly.

(D2-left) (D2-right)

(D2-middle)

(Hold here)

USE TOOL:6m/m

Step 5. Remove the bottom polyfoam pieces #5 & #6.

POLYFOAM(5&6)

( Main frame lift up then screw it)

Step 1. Remove the four preassembled screws (B3), spring washer (B4)

and washer (B5) from the front stabilizer (B).

Step 2. Attach the front stabilizer (B) on to main frame (A) with screws (B3),

spring washer (B4) and washer (B5).

Step 3. Attach the console supporting tube (D) on to main frame (A) with screw (D2-left)

and screw (D2-right).

CENTRAL SUPPORTING TUBE (F) ASSEMBLY

USE TOOL:6m/m

REAR STABILIZER (C) ASSEMBLY

Step 1. Attach the central supporting tube (F)

onto main frame (A) with four screws

(F4).

Tighten the screws (F4) on the

central supporting tube when the unit is lifted.

Step 1. Attach the rear stabilizer (C ) onto the central supporting tube (F) with four

screws (F2) and washer (F3).

Step 2. Adjust the stabilizer feet on the bottom rear stabilizer (C ) to level the machine.

CONSOLE & CONSOLE COVER ASSEMBLY

Step 1. Remove four screws (G3) from the console (G).

Step 2. Connect all wires.

Step 3. Fit the console (G) to console supporting tube (D).

CONSOLE SUPPORTING TUBE COVER (L&R) ASSEMBLY

USE TOOL:

A78

Step 4.

Step 5.

Slide the console cover (G2) on console supporting tube (D).

Screw console, console supporting tube (D)

and console cover (G2) together using screws (G3).

Step 1. Attach the console supporting tube cover-L (A8) and console supporting tube cover-R

(A9) using screws (A78).

PEDAL TUBE COVER-(L&R) ASSEMBLY

FRONT CONNECTING SHAFT (A53) &

FRONT PEDAL SUPPORTING TUBE-L&R (A64&A65) ASSEMBLY

A53

A64

A65

A62

A61

USE TOOL:6m/m

A107

A63

L1(A72)

A64

L2(A73)

A78

R2(A74)

R1(A75)

Step 1. Attach front connecting shaft (A53) and front pedal supporting

tube-L (A64) using bolt (A107), screw (A63) spring washer (A62)

and washer (A61).

** Repeat same step to finish right side assembly.

Step 1. Fit the pedal tube cover-L1 (A72) and pedal tube cover-L2 (A73) to the

front pedal supporting tube-L (A64) using the two screws (A78).

** Repeat same step to finish right side assembly.

HANDLE BAR & FRONT PEDAL SUPPORTING TUBE COVER

ASSEMBLY

Step 1. Remove the six preassembled screws (E4&E5) from the handle bar (E1).

Step 2. Remove the two preassembled screws (A108) from the main frame (A).

ADAPTER ASSEMBLY

USE TOOL:

**Repeat same step to finish right side assembly.

E1 E2

A66 A67

A108

Attach one end of the adapter into the

power socket and the other end into the input

jack on the main frame like shown.

Step 3. Mount the handle bar (E1) onto the

main frame (A) with screws (E4&E5).

Step 4. Mount the front pedal supporting

tube cover (A66&A67) onto the

main frame (A) with two screws (A108).

WARNING: Never attempt to lift the machine by yourself, ask for additional help if needed

and never attempt to lift the machine if you have any medical issues.

HOW TO TRANSPORT THE MACHINE

HOW TO USE TOGGLE SWITCH TO ADJUST THE RESISTANCE

If the machine needs to be transported to a different location, lift up the rear stabilizer

until the front transportation wheels engage the ground. You may now move the

machine to the desired location. After the move, gently set the machine down at its

new location and adjust the levelers on the bottom rear stabilizer to level the machine

if needed.

When the console is powered on, you may press the toggle buttons on the small handlebar

to adjust the resistance: Press “+LOAD” button on the right side to increase resistance and

press “-LOAD” button on the left side to decrease resistance.

HOW TO ADJUST THE STRIDE

22”

17”

White sticker

Knob

Orange sticker

**Please loosen the knob

first, then pull out and hold

the pedal at the same time

by moving pedal up/down

to adjust the desired stride

length.

Step 1. There are 2 different stride choices on the 1280ef. They are 17” and 22”.

(When you choose 17”, you will see the orange sticker on front pedal supporting tube,

when you choices 22”, you will see the white sticker on front pedal supporting tube.)

Step 2. Loosen the knob and pull out to adjust the stride length as you desire.

Step 3. After selecting the stride length, screw the knob back in tightly.

Step 4. Repeat this to adjust the stride length for the other side.

WARNING: NEVER adjust the stride length while standing on the machine.

Always adjust both the right and left stride to the same setting. Uneven

positions is never recommended and dangerous.

Inhaltsverzeichnis

Andere TOORX Fitnessgeräte Handbücher

TOORX

TOORX Chrono Series Bedienungsanleitung

TOORX

TOORX WBX60 Bedienungsanleitung

TOORX

TOORX BRX3000 Bedienungsanleitung

TOORX

TOORX ERX70 Bedienungsanleitung

TOORX

TOORX WBX-250 Bedienungsanleitung

TOORX

TOORX SRX3500 Bedienungsanleitung

TOORX

TOORX TRX 9000 EVO TFT Bedienungsanleitung

TOORX

TOORX BRXOffice Compact Bedienungsanleitung

TOORX

TOORX ERX70 Bedienungsanleitung

TOORX

TOORX MSX 60 Bedienungsanleitung

TOORX

TOORX MSX-70 Bedienungsanleitung

TOORX

TOORX WLX70 Bedienungsanleitung

TOORX

TOORX CSX70 Bedienungsanleitung

TOORX

TOORX BRX R9500 Bedienungsanleitung

TOORX

TOORX WBX40 Bedienungsanleitung

TOORX

TOORX WLX80 Bedienungsanleitung

TOORX

TOORX Professional Line WBX4000 Bedienungsanleitung

TOORX

TOORX BRX R300 ERGO Bedienungsanleitung

TOORX

TOORX TRX Tourer Bedienungsanleitung

TOORX

TOORX CSX2000 Bedienungsanleitung

TOORX

TOORX WBX-2400 Bedienungsanleitung

TOORX

TOORX CLX-9000 Bedienungsanleitung

TOORX

TOORX BRX RECUMBENT COMPACT Bedienungsanleitung

TOORX

TOORX ERX90 Bedienungsanleitung

Beliebte Fitnessgeräte Handbücher anderer Marken

NSD

NSD PB-188P Bedienungsanleitung

Performance

Performance HyperVibe Bedienungsanleitung

Scalamobil

Scalamobil S27 Bedienungsanleitung

Precor

Precor Experience Series Bedienungsanleitung

FYTTER

FYTTER RedMIUM BENCH BE-T6R Bedienungsanleitung

Taurus

Taurus TF-RK1312 Bedienungsanleitung

Nustep

Nustep T5 Bedienungsanleitung

Precor

Precor CW-507 Bedienungsanleitung

Movement

Movement BICEPS Idea Bedienungsanleitung

Kegel8

Kegel8 V For Men Bedienungsanleitung

BLK BOX

BLK BOX 21-0122-0B Bedienungsanleitung

Stamina

Stamina aeropilates premier 299 Bedienungsanleitung

SPORTSTECH

SPORTSTECH PBX300 Bedienungsanleitung

ParaBody

ParaBody Serious Steel 877102 Bedienungsanleitung

Weslo

Weslo Gym 650 Bedienungsanleitung

Rebel

Rebel ACTIVE RBA-1011 Bedienungsanleitung

4iiii

4iiii FLiiiight Bedienungsanleitung

Image

Image 540 Bedienungsanleitung