Tornado 97130 Handbuch

TORNADO INDUSTRIES, LLC

3101 WICHITA COURT

FORT WORTH, TX 76140

PHONE: 800-VACUUMS

FAX: 817-551-0719

WWW.TORNADOVAC.COM

Operations & Maintenance Manual

For Commercial Use Only

8 lb. Lightweight Vacuum

MODEL NO: 97130 (115V) & 97131 (230V)

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

Long Term Buyer Protection Limited Warranty

10 Years*

Plastic water tanks and Rotationally-molded bodies

2 Years*

Parts on all Tornado cleaning equipment

1 Year*

Labor on all Tornado cleaning equipment

1 Year*

Warranty on batteries, one year prorated

All battery warranties are handled directly by the battery manufacturer, on a one year prorated basis

Tornado Industries, LLC. (Tornado) warrants to the end/user customer that the Tornado product(s) will

be free from defects in material and workmanship for the duration(s) described below. This limited

warranty DOES NOT cover machines and/or components subject to normal wear and tear, damage

that occurs in shipping, failures resulting from modication, accident, unsuitable operating environ-

ment, misuse, abuse, neglect, or improper maintenance by you. For full details, contact your Autho-

rized Tornado Distributor, Service Center, or the Tornado Technical Service Department. Tornado

sales and service representatives are not authorized to waive or alter the terms of this warranty, or to

increase the obligations of Tornado under the warranty.

Terms subject to change without notice

1. Except all Windshears™ Blowers, Storm, TV2SS, Side and Downdraft, Insulation Blowers, CV 30,

CV 38, CK14/1 PRO, CK 14/2 PRO, SWM 31/9, CK LW13/1, CK LW 13/1 ROAM, CV 38/48 Dual,

PV6, PV10, PV6 ROAM, Wall Mount Vacuum and all chargers are warranted for 1 (one) year for both

parts and labor.

2. All non-wear item parts purchased after warranty expiration are warranted for 90 days.

3. Warranty starts from the date of sale to the consumer or, at Tornado’s discretion, 6 months after

the dealer purchased the unit from Tornado, whichever comes rst.

4. The EB 30 is warranted for a period of 90 days for both parts and labor.

5. The warranty on engines used on propane powered equipment is limited to motor manufacturer’s

warranty.

6. Ride-on Scrubbers are warranted for 24 months, parts, 6 months labor or 1,000 hours, whichever

occurs rst.

Note: Tornado, The Latest Dirt, Floorkeeper,

Carpetkeeper, Carpetrinser, Carpetrinser/Dryer,

Headmaster, Taskforce, PAC-VAC, T-Lite, Glazer,

Windshear, Max-Vac and Trot-Mop are trademarks

of Tornado Industries

Website: www.tornadovac.com

Phone 1-800-VACUUMS

Fax 817-551-0719

Address 3101 Wichita Court

Fort Worth, TX 76140

1-800-VACUUMS 90 Years of Cleaning Innovation A Tacony Company

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

NOTES

This instruction book covers:

Write your machine serial number here:________________________________

MODEL NO. 97130 97131

VOLTS 115 230

SERIES LW 13/1 LW 13/1

ALL SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

GROUNDING INSTRUCTIONS

This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path of

least resistance for electric current to reduce the risk electric shock. This machine is equipped with a

cord having an equipment -grounding conductor and grounding plug. The plug must be inserted into

an appropriate outlet that is properly installed and grounded in accordance with all local codes and

ordinances.

WARNING: Improper connection of the equipment-grounding conductor can result in a risk of electric

shock. Check with a qualied electrician or service person if you are in doubt as to whether the outlet

is properly grounded. Do not modify the plug provided with the appliance - if it will not t the outlet,

have a proper outlet installed by a qualied electrician.

This appliance is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the

plug illustrated in sketch A.

Your new Tornado unit is a high quality, precision-made product. All parts used in the manufacturing of this unit

have passed rigid quality control standards prior to assembly. Please safeguard the original receipt / invoice. If

you experience any problems with your unit during the warranty period, the original receipt / invoice will act as

proof of purchase. Contact Tornado for any warranty inquiries.

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

IMPORTANT SAFETY INSTRUCTIONS

READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING THIS UNIT

Read and understand this owner’s manual and all labels on the unit before operating. Safety is a

combination of common sense,staying alert and knowing how your unit works. Use this unit only as

described in this manual. Use only manufacturer’s recommended attachments. To reduce the risk of

personal injury or damage to your unit use only Tornado recommended accessories.

This machine is intended for commercial use only. It is designed exclusively to pick up dirt, dry debris

and dust in an indoor environment and is not constructed for any other use. The pick up of any type of

uid or dangerous / toxic materials is prohibited. Use only recommended accessories.

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE.

When using an electrical appliance, basic precautions should always be followed, including the fol-

lowing:

SAVE THESE INSTRUCTIONS.

• WARNING! To reduce the risk of re, electric shock, or injury:

• Do not leave appliance unattended when plugged in. Unplug from outlet when not in use and be-

fore servicing.

• WARNING: ELECTRIC SHOCK COULD OCCUR IF USED OUTDOORS OR ON WET SURFAC-

ES.

• Do not allow to be used as a toy. Close attention is necessary when used by or near children.

• Use only as described in this manual. Use only manufacturer’s recommended attachments.

• Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped,

damaged, left outdoors, or dropped into water, return it to a service center.

• Do not pull or carry by cord, use cord as handle, close a door on cord, or pull cord around sharp

edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.

• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

• Do not handle plug or appliance with wet hands.

• Turn off all controls before unplugging.

• Do not put any object into openings. Do not use with any opening blocked, keep free of dust, lint,

hair, and anything that may reduce air ow.

•Keep hair, loose clothing, ngers and all parts of body away from openings and moving parts.

• Do not pick up anything that is burning or smoking, such as cigarettes, matches or hot ashes.

•Do not use without vacuum bag and / or lters in place.

• Use extra care when cleaning stairs.

•Do not use to pick up ammable or combustible liquids such as gasoline or use in areas where

they may be present.

• Do not attempt to service the unit while appliance is plugged in.

• For grounded models, connect to a properly grounded outlet only. See Grounding Instructions.

• This machine is not intended for use by persons (including children) with reduced physical, sen-

sory or mental capabilities, or lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the machine by a person responsible for their safety.

• Keep children and unauthorized persons away from the machine when in use.

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

PRODUCT FEATURES AND BENEFITS

The Dual Suction System is a lightweight, yet powerful, cleaning system ideal for commercial use on

all types of carpets and oors.

1. Handle – designed for comfort and easy maneuvering.

2. Power Switch – conveniently located in handle.

3. Handle Tube – lightweight, for easy movement and use.

4. Connector Tube – strong lightweight aluminum tube is designed for optimal airow.

5. Dust Tube – large diameter dust tube designed to minimize clogging.

6. Cloth Bag – durable, reinforced material for years of service.

7. Dust Bag – top loading bag for clean and easy bag change.

8. The Post-Motor Filter – helps to reduce motor emissions.

9. Motor – 6 amps of full cleaning power, saves energy.

10. Power Source Plug – grounded for safe, reliable operation.

11. Connector Plug – for enhanced safety.

12. Power Cord – 50 foot heavy-duty, commercial quality for extended reach.

13. Quick Release Cord Hooks – for quick, easy removal of power cord.

14. Powerfoot – twin fan/dual suction design for deeply embedded dirt and superior edge cleaning.

15. Rotating Cleaning Brush – continuous, rotating dual action for thorough cleaning; white, non-mar-

ring bristles.

16. Non-Marring Wheels – safe for use on bare oors.

17. Soft Furniture Protection Guard – helps protect furniture while vacuuming.

18. Hair Cutter – ensures that any long hair or other bers are cut and broken down into lengths that

are manageable for the vacuum. This helps to prevent clogs.

19. Filter Cover – easily removes with one screw for easy access to lter.

20. Dual Cord Storage – wrap cord around the back of the unit, or simply hang cord on the front Cord

Storage Hook.

21. Tube Release Buttons – allows for easy access in the unlikely event of the tube clogging.

22. Bag Tension Spring – keeps the bag secure at the base of the bag.

23. Rubber Collars – designed to seal air path at critical connections, preventing loss of airow.

24. Top Cover – simply removes with 3 screws allowing for easy belt change.

25. Drive Belt – designed for optimal life and performance.

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

WARNING: Plastic bags or lm can be dangerous. To avoid danger of suf-

focation, keep away from babies and children.

The dual Suction System is packaged for convenience and requires mini-

mal assembly.

The only tool you will need is a Phillips head screwdriver.

1. Slide the handle Tube into the Connector, aligning the hole in the Handle

Tube with the molded hole at the top of the Connector.

2. Hold the hex nut in front of the Connector in the hex shaped cavity while

inserting the screw with your nger from the back. Tighten the screw while

placing your nger over the hex cavity to hold the hex nut in place. After a

few turns, tighten further with a Phillips head screwdriver. Do not overtight-

en.

3. Slide screw through plastic Cord Hook from the inside of Cloth Bag. Align

screw with hole in Handle Tube. Tighten screw.

4. Remove screw from Filter Cover. Remove Filter Cover. Insert the Con-

nector Plug into the back of the unit at the rear of the Powerfoot – Make

sure the Connector Plug is fully inserted. Replace Filter Cover. Replace

Filter Cover Screw.

Your Vacuum cleaner is now ready to use.

Tip. Before cleaning under low furniture, always check area rst for objects

that might harm the Rotating Cleaning Brush or get caught in the Dust Tube.

Power Supply

The Power Cord is stored at the back of the vacuum cleaner, and is looped

around the Quick Release Cord Hooks. The polarized Power Source Plug

is designed to attach to the Power Cord during storage. Before using, make

sure the Connector Plug is securely attached to the Powerfoot and that the

Power Source Plug is plugged into a polarized outlet.

Power Switch

The Power Switch is located in the Handle of the cleaner. Push down (I) to

turn ON. Push up (O ) to turn OFF.

Power Cord Storage

When you are nished using your vacuum, return it to the upright position.

Make sure the vacuum is turned OFF. Always unplug the vacuum by grasp-

ing the Power Source Plug (NOT the Power Cord) and disconnecting from

the outlet. Properly store the Power Cord by winding the cord around the

Quick Release Cord Hooks on the back of the vacuum in a continuous loop,

or by hanging the cord on the Cord Storage Hook located on the front of the

vacuum. Attach the Power Source Plug to the Power Cord.

Operation

This vacuum, with Dual Suction System is designed to effectively and safely

clean all types of carpeting, wood, linoleum, and vinyl oors. Its wide 14-inch

Powerfoot makes cleaning quick and easy.

To place the vacuum in position for use, lightly press your foot on the Power-

foot and tip the Handle backwards.

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

Routine Maintenance

For maximum performance from your vacuum, check and

maintain vacuum parts regularly.

Replacing the Dust Bag

Check the Dust Bag weekly. Replace the Dust Bag when it is

near full or when cleaning suction diminishes. Never reuse a

Dust Bag.

WARNING: To avoid electrical shock or injury from mov-

ing parts, always turn OFF the Power Switch and unplug the

Power Source Plug before performing maintenance

or trouble shooting. Always unplug by grasping the Power

Source Plug; NEVER pulling on the Power Cord to unplug.

Tip: Vacuuming new carpet or vacuuming ne powders may

clog the Dust Bag. Check Dust bag often.

Unplug vacuum by grasping and pulling on the Power Source

Plug.

Unzip Cloth Bag. Remove collar retainer by pressing on the

two tabs and pulling the top towards you. Dispose of Dust Bag.

Slide collar of new Dust Bag completely into collar retainer.

Push collar retainer back into position and secure in place.

Tuck the remainder of the Dust Bag completely inside the

Cloth Bag. Make sure it lays at, top to bottom, without bunch-

ing. Zip Cloth Bag.

Cleaning the Dust Tube

The vacuum features Dust Tube designed to optimize cleaning

power. For best performance, routinely check and clear excess

dust and other debris.

Note: Cover oor with newspaper to catch any loose material

or dust removed during cleaning.

Release Bag Tension Spring.

Remove Filter Cover screw and then remove Filter Cover.

Unplug Connector Plug.

Locate the Tube Release Button at the top of the Powerfoot.

The Tube Release

Button is hidden under a Rubber Collar on the side of the Dust

Tube and can be pressed through the Rubber Collar. Lift off

the Dust Tube while pressing on the Tube Release Button.

Use a wire brush to clean out the inside of the Dust Tube and

the top section of the Powerfoot where they connect.

Reconnect the tube with the Powerfoot. It should snap into

place. Make sure that the tube release button on the Tube

lines up with the Tube Release Button on the Rubber Collar.

Plug the Connector Plug back into base of vacuum.

WARNING: To avoid electrical shock or injury from mov-

ing parts, always turn OFF the Power Switch and unplug the

Power Source Plug before performing maintenance

or trouble shooting. Always unplug by grasping the Power

Source Plug; NEVER pulling on the Power Cord to unplug.

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

Cleaning the Filter

The post-motor HEPA lter is located in the Powerfoot of your vacuum clean-

er. It should be checked often, and cleaned when the post-motor HEPA lter

becomes dirty.

1. To clean post-motor HEPA lter, remove the screw with a Phillips head

screwdriver.

2. Lift out lter cover.

3. Remove post-motor HEPA lter and blow out with air.

4. Reinstall post-motor HEPA lter.

5. Replace lter cover by sliding in the two tabs at the top of the lter cover

and centering over the screw hole.

6. Replace screw.

Cleaning the Rotating Cleaning

Brush/Replacing the Drive Belt

Check the Rotating Cleaning Brush and Drive Belt regularly for wear or dam-

age. Keep the Rotating Cleaning Brush ends free of string, hair, and carpet

bers. These can become entangled and reduce the vacuum’s cleaning ef-

fectiveness.

NOTE: The Rotating Cleaning Brush can most often be cleaned without

removal from the vacuum. If there is an excessive amount of hair and debris,

remove the Rotating Cleaning Brush for proper cleaning.

1. Unplug the vacuum and turn face down on a at surface.

2. Remove all 3 screws from the bottom of the Powerfoot.

3. Grip both the Top Cover and base while turning unit back over. Lift off Top

Cover.

4. Check Drive Belt. If it is broken or damaged, remove Rotating Cleaning

Brush and replace Drive Belt.

WARNING: To avoid electrical shock or injury from moving parts, always turn

OFF the Power Switch and unplug the Power Source Plug before perform-

ing maintenance or trouble shooting. Always unplug by grasping the Power

Source Plug; NEVER pulling on the Power Cord to unplug.

5. To remove the Rotating Cleaning Brush, pull the right side of the Rotating

Cleaning Brush toward the front of the Powerfoot as you lift slowly.

6. Clean off Rotating Cleaning Brush as necessary.

7. Place existing or new Drive Belt over Rotating Cleaning Brush and the

motor shaft. Insert the end cap pin on the left of the Rotating Cleaning Brush

into the slot on the Powerfoot and slide the end cap pin on the right end of

the Rotating Cleaning Brush in to the slot in the Powerfoot and lower until it

clicks into place.

8. Make sure the Furniture Protection Guard is still intact.

9. Align the 3 tabs on the Top Cover with the 3 slots in the Powerfoot. Press

into place, making sure the Furniture Protection Guard is on the outside.

10. Turn vacuum cleaner face down.

11. Reinstall the 3 screws beginning with the center screw.

WARNING: To avoid elec-

trical shock or injury from

moving parts, always turn

OFF the Power Switch

and unplug the Power

Source Plug before per-

forming maintenance or

trouble shooting. Always

unplug by grasping the

Power Source Plug;

NEVER pulling on the

Power Cord to unplug.

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Tornado Staubsauger Handbücher

Tornado

Tornado Headmaster 97051 Handbuch

Tornado

Tornado TASKFORCE 97060 CFV 10 Handbuch

Tornado

Tornado ExSELLerate Series Einrichtungshandbuch

Tornado

Tornado CK 3030 Produkthandbuch

Tornado

Tornado 98699 Handbuch

Tornado

Tornado 93030 Bedienungsanleitung

Tornado

Tornado TO 4210 Bedienungsanleitung

Tornado

Tornado 95954 Handbuch

Tornado

Tornado Taskforce 15 Trot-Mop Handbuch

Tornado

Tornado 95995 Bedienungsanleitung

Tornado

Tornado CK LW 13/1 Handbuch

Tornado

Tornado 4000 SERIES Leitfaden

Tornado

Tornado Nomad 4412 Bedienungsanleitung

Tornado

Tornado ExSELLerate Series Einrichtungshandbuch

Tornado

Tornado PS Series Handbuch

Tornado

Tornado Marathon 350 98132 Handbuch

Tornado

Tornado TASKFORCE 95953 Handbuch

Tornado

Tornado Pro PAC Handbuch

Tornado

Tornado CV 38/1 Bedienungsanleitung

Tornado

Tornado TO420 Bedienungsanleitung

Tornado

Tornado TO 4210 Bedienungsanleitung

Tornado

Tornado Coriolys SANS SAC Bedienungsanleitung

Tornado

Tornado Rolfy 1055 Bedienungsanleitung

Tornado

Tornado Taskforce 17 Einrichtungshandbuch

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung