Zeiss LSM 880 Bedienungsanleitung

ZEISS LSM 880 INVERTED (i880) QUICK START GUIDE

The Zeiss LSM880 is a laser scanning confocal microscope with full confocal and multiphoton capability. The

confocal detectors are spectrally resolved and can be used with either the standard (single photon) excitation

lines or the multiphoton excitation lines. The non-descanned (NDD) detectors can only be used with multiphoton

excitation.

INSTRUMENT OVERVIEW

AND USER RESOURCES

FULL TURN ON SEQUENCE (FIRST ONE ON)

1) If the computer is off, turn it on and let it boot.

2) Turn on the main switch.

3) Turn on the Systems/PC switch. (When

touchscreen has booted, adjust heating and

CO2 under Microscope->Inkubation if

applicable.)

4) Turn on the Components switch. Wait for the

RTC to boot (see under table).

5) Log in to the computer.

6) Start Zen and select Start System Button.

7) Turn on laser lines you will be using. (If you are

using multiphoton excitation, turn on both lines

on even if you are just using one. Note that the

Ar and multiphoton lines take a while to turn on.

You can follow the warm-up progress by

selecting the laser and the Laser Properties

below)

FULL TURN OFF SEQUENCE (LAST ONE ON)

9) Save your data and transfer it to the fileshare.

8) Remove your sample and clean off your

objective. (If using incubation, turn temp and

CO2 regulation off and close CO2 tank using

main gray valve only.)

7) Turn off lasers.

6) Exit Zen.

5) Log out of the computer.

4) Turn off the Components switch.

3) Turn off the Systems/PC switch.

2) Wait a few minutes for the Ar laser to cool.

Turn off the main switch.

1) Do not turn off computer.

PARTIAL TURN OFF SEQUENCE

(Someone else is scheduled after your time slot)

9) Save your data and transfer it to the fileshare.

8) Remove your sample and clean off your

objective. (If using incubation, turn temp and

CO2 regulation off and close CO2 tank using

gray handle only.)

7) Turn off lasers.

6) Exit Zen.

5) Log out of the computer.

PARTIAL TURN ON SEQUENCE

(Microscope already on)

5) Log in to the computer.

6) Start Zen and select Start System Button.

7) Turn on laser lines you will be using. (If you are

using multiphoton excitation, turn on both lines

on even if you are just using one. Note that the

Ar and multiphoton lines take a while to turn on.

You can follow the warm-up progress by

selecting the laser and the Laser Properties

below)

LASER LINES

STANDARD OBJECTIVE SPECIFICATIONS

Mag

Immersion

medium

CS thickness

(mm)

WD (mm)

Objective Type

Trans > 0.5

10X

0.3

Air

0.17

5.2

EC Plan-Neofluar

350-1200nm

20X

0.5

Air

0.17

2.0

EC Plan-Neofluar

350-1250nm

32X

0.85

Water

0-0.17

1.1

C-Achroplan

450-1300nm

40X

1.1

Water

0.14-0.19

0.62

LD C-Apochromat

350-1150nm

40X

1.4

Oil

0.17

0.13

Plan-Apochromat

380-1200nm

10X

0.45

Water

0.17

1.8

C-Apochromat

350-1200nm

63X

0.75

Air

0-1.5

1.7

(at 0.75 CS)

LD Plan-Neofluar

350-950nm

NDD DETECTOR FILTERS

*Do not use any laser lines <700nm with the NDD detectors!

Andere Zeiss Mikroskop Handbücher

Zeiss

Zeiss Axioscope 5 Bedienungsanleitung

Zeiss

Zeiss LSM 510 Inverted Bedienungsanleitung

Zeiss

Zeiss Axio Examiner Bedienungsanleitung

Zeiss

Zeiss LSM 800 Bedienungsanleitung

Zeiss

Zeiss Axiovert 135M Bedienungsanleitung

Zeiss

Zeiss Definite Focus.2 Bedienungsanleitung

Zeiss

Zeiss Primovert Bedienungsanleitung

Zeiss

Zeiss Axiovert 25 C Bedienungsanleitung

Zeiss

Zeiss Axiolab Pol Bedienungsanleitung

Zeiss

Zeiss Axiotech Bedienungsanleitung

Zeiss

Zeiss Axiovert 200 Bedienungsanleitung

Zeiss

Zeiss Axioplan 2 imaging and Axiophot 2 Bedienungsanleitung

Zeiss

Zeiss Crossbeam 350 Bedienungsanleitung

Zeiss

Zeiss LSM 510 META Bedienungsanleitung

Zeiss

Zeiss ?IGMA VP-FE-SEM Bedienungsanleitung

Zeiss

Zeiss Crossbeam 550L Bedienungsanleitung

Zeiss

Zeiss Axioskop Bedienungsanleitung

Zeiss

Zeiss Axio Observer Series Bedienungsanleitung

Zeiss

Zeiss KF 2 ICS Bedienungsanleitung

Zeiss

Zeiss LSM 880 Bedienungs- und Wartungshandbuch

Zeiss

Zeiss Axiocam 105 color Bedienungsanleitung

Zeiss

Zeiss Axiovert 40 Bedienungsanleitung

Zeiss

Zeiss LSM 710 Bedienungsanleitung

Zeiss

Zeiss LSM 510 Bedienungsanleitung

Beliebte Mikroskop Handbücher anderer Marken

Thermo Scientific

Thermo Scientific Nicolet iN10 Leitfaden

National

National DC3-163 Bedienungsanleitung

KERN Optics

KERN Optics OPE-1 Bedienungsanleitung

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Bedienungsanleitung

Prior

Prior Lux POL Bedienungsanleitung

Opitec

Opitec Smartscoop 115615 Bedienungsanleitung

KERN

KERN OPO-1 Bedienungsanleitung

Topcon

Topcon SP-1P Bedienungsanleitung

Motic

Motic PA43 Bedienungsanleitung

Leica

Leica DVM5000 Benutzerhandbuch

MshOt

MshOt MZ62 Bedienungsanleitung

KERN Optics

KERN Optics OZR-5 Bedienungsanleitung

VWR

VWR VisiScope 384 Series Bedienungsanleitung

Nikon

Nikon ECLIPSE E200 POL Bedienungsanleitung

Leica

Leica DI C800 Handbuch

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

Olympus

Olympus SZ61 Bedienungsanleitung