ACME CRUX Bedienungsanleitung
- 1 -
CONTENTS
01/ Safety Instructions.................................................................................................. 2
02/ Technical Specifications ........................................................................................ 4
03/ Control Panel........................................................................................................... 6
04/ Fixture Installation.................................................................................................. 7
05/ Effect Wheels.......................................................................................................... 9
06/ How To Set The Unit.............................................................................................. 9
6.1 Main Functions................................................................................................ 9
6.2 Home Position Adjustment ......................................................................... 22
07/ Control By Universal DMX Controller.............................................................. 29
7.1 DMX512 Connection................................................................................... 29
7.2 Address Setting.............................................................................................. 30
7.3 DMX512 Configuration............................................................................... 31
08/ Error Information .................................................................................................. 36
09/ Troubleshooting ....................................................................................................45
10/ Fixture Cleaning....................................................................................................45
- 2 -
01/ Safety Instructions
WARNING
Please keep this User Guide for future consultation. If you sell the unit to another user, be
sure that they also receive this instruction manual.
Important:
Damages caused by the disregard of this user manual are not subject to warranty. The dealer
will not accept liability for any resulting defects or problems.
Unpack and check carefully to ensure that there is no transportation damage before
using the unit.
This product is suitable for wet locations. Do not immerse in water.
DO install and operate by qualified operator.
DO NOT allow children to operate the fixture.
Use safety chain when fixing the unit. Handle the unit by carrying its base instead of
head only.
The unit must be installed in a location with adequate ventilation, at least 50cm from
adjacent surfaces.
Be sure that no ventilation slots is blocked, otherwise the unit will be overheated.
Before operation, ensure that you are connecting this product to the proper voltage in
accordance with the specifications in this manual or on the product’s specification label.
It’s important to ground the yellow/green conductor to earth in order to avoid electric
shock.
Minimum ambient temperature TA: 0℃. Maximum ambient temperature TA: 40℃. Do
not operate this product at a lower or higher temperature.
DO NOT connect the device to any dimmer pack.
Keep flammable materials away from the fixture while operating to avoid fire hazard.
Make sure the power cord is not crimped or damaged; replace it immediately if damaged.
Unit’s surface temperature may reach up to 75 ℃. DO NOT touch the housing
bare-handed during its operation.
Avoid any flammable liquids, water or metal from entering the unit. Once it happens, cut
Please read the instruction carefully which includes important information
about the installation, usage and maintenance.
- 3 -
off the mains power immediately.
DO NOT operate in a dirty or dusty environment. DO clean the fixture regularly.
DO NOT touch any wire during operation as there might be a hazard of electric shock.
Avoid entanglement of the power cord with other wires.
The minimum distance to objects/surface must be more than 3 meters.
In the event of serious operating problem, stop using the unit immediately.
Never turn on and off the unit time after time.
The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly
damaged.
DO NOT open the housing as there are no user serviceable parts inside.
DO NOT attempt to operate this unit if it becomes damaged. DO NOT attempt any
repairs yourself. Repairs carried out by unskilled people can lead to damage or
malfunction. Please contact the nearest authorized technical assistance center if needed.
Disconnect this product from its power source before servicing.
DO use the original packaging if the device is to be transported.
Avoid direct eye exposure to the light source while the product is on.
DO NOT operate this product if you see damage on the housing, shields, or cables. Have
the damaged parts replaced by an authorized technician at once.
- 4 -
02/ Technical Specifications
Power Voltage
100-240V~ 50/60Hz
Power Consumption
1455W
Light Source
SCL1001YCF-80-R72
Color Temperature
2700-7500K
Zoom Range
5°-60°
Dimmer/Strobe
0-100% smooth dimming; Outstanding strobe effect with variable
speed
Color Wheel
Color Wheel 1
5 colors plus frost and open with rainbow
effect
Color Wheel 2
5 colors plus CRI and open with rainbow
effect
Movement
Pan
540°
Tilt
260°
Pan/Tilt Resolution
16 bit
Automatic pan/tilt position correction
Fixation
Pan/Tilt lock
Control
DMX Channel
19/28 Channels
Control Mode
DMX512
RDM
Firmware Upgrade
Firmware Upgrade via DMX link
Construction
Display
LCD display
Data In/Out
5-pin IP XLR (3-pin IP XLR is optional)
Power In/Out
Waterproof Power Connector in/out
Protection Rating
IP66
Features
Standard Mode: Ra>70
High CRI Mode: Ra>90
High CRI filter used to switch to HCRI mode
Linear CMY color mixing
Linear CTO color correction
4 x fast and smooth framing shutters; The position and the angle of
each shutter blade can be controlled individually; Each shutter
blade can block out light completely; The framing module can be
- 5 -
rotated at ±60 degrees
IP66 protection rotating, can be used outdoors all year round
Dimensions
412x330x743mm
16.2"x13"x29.3"in
Weight
41.5kgs
91.5lbs
Photometric Diagram:
- 6 -
03/ Control Panel
1. Display
To show the various menus and the selected function
2. Buttons
MENU
To enter into move backward or leave the menu
UP
To go backward to move up in the menu
DOWN
To go forward to move down in the menu
ENTER
To perform the desired functions
3. DMX OUT
For DMX512 link, use 5-pin XLR cable to link the next units to output
DMX signal (3-pin XLR cable is optional)
4. DMX IN
For DMX512 link, use 5-pin XLR cable to link the unit and DMX
controller to input DMX signal (3-pin XLR cable is optional)
5. GORE VALVE
6. POWER IN
To connect to supply power
7. POWER OUT
To connect to the next fixture
- 7 -
04/ Fixture Installation
DO install and operate by qualified operator. Fixture(s) should be installed in areas
outside walking paths, seating areas, or away from areas were unauthorized personnel
might reach the fixture by hand. NEVER stand directly below the fixture(s) when rigging,
removing or servicing.
Always ensure that the unit is firmly fixed to avoid vibration and slipping off during
operation. Ensure that the trussing or area of installation must be able to hold 10 times
the weight without any deformation. Always attach a safety cable that can hold at least
12 times the weight of the fixture whenever installing this fixture in a suspended
environment to ensure that the fixture will not fall if the clamp fails.
This fixture is fully operational in three different mounting positions: hanging
upside-down, mounted sideways on trussing, or set on a flat level surface. Always use
and install the supplied safety cable as a safety measure to prevent accidental damage
and/or injury in the event the clamp fails.
- 8 -
- 9 -
05/ Effect Wheels
06/ How To Set The Unit
6.1 Main Functions
To access the control menus, press the [MENU] button.
Navigate the menu structure, using the [ENTER], [UP] and [DOWN] buttons.
To select a menu option or to confirm a selection, press the [ENTER] button.
To return to a higher level in the menu structure without making a change, press the
[MENU] button, or wait 30 seconds.
DANGER!
Install the color wheels with the device switched off only.
Unplug from mains before changing the color wheels!
The screen will be automatically locked if there is no operation for a long time, and can
be unlocked by long-pressing the [MENU] button.
Inhaltsverzeichnis
Andere ACME Beleuchtungsausrüstung Handbücher
ACME
ACME CB-16TC Bedienungsanleitung
ACME
ACME Gemini Bedienungsanleitung
ACME
ACME Energy Spot PRO Bedienungsanleitung
ACME
ACME Diabolo Bedienungsanleitung
ACME
ACME ENERGY SPOT XA-400 SPOT Bedienungsanleitung
ACME
ACME LED-SC252 Bedienungsanleitung
ACME
ACME Sunrise Bedienungsanleitung
ACME
ACME CP-18TC Bedienungsanleitung
ACME
ACME Xperior XP-380 BEAM IP F Bedienungsanleitung
ACME
ACME IM-250 SP Bedienungsanleitung
ACME
ACME SAMURAI SCAN 50 Bedienungsanleitung
ACME
ACME Dotline180 Bedienungsanleitung
ACME
ACME Xperior 1500SZ Bedienungsanleitung
ACME
ACME CM-150 PAGEANT 150 Bedienungsanleitung
ACME
ACME Thunderbreaker Bedienungsanleitung
ACME
ACME GEIST BSWF Bedienungsanleitung
ACME
ACME ASTRO LED-256D Bedienungsanleitung
ACME
ACME V Inground VI-10QW Bedienungsanleitung
ACME
ACME Spartan Hybrid C Bedienungsanleitung
ACME
ACME LED-256D-10W Bedienungsanleitung
Beliebte Beleuchtungsausrüstung Handbücher anderer Marken
Qazqa
Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung
Commercial Electric
Commercial Electric 54568141 Bedienungsanleitung
CREE LIGHTING
CREE LIGHTING 304 Series Bedienungsanleitung
Goobay
Goobay 49867 Bedienungsanleitung
ECOMAN ITALIA
ECOMAN ITALIA LED T8 Bedienungsanleitung
Alkalite
Alkalite Krypton KT-81 Bedienungsanleitung
