ACME ColorTec 250 LED-CC60 Bedienungsanleitung

UserGuide

Please read the instruction carefully before using

Contents

1. Safety Instructions............................................................................................................................2

2. Features............................................................................................................................................3

3. Technical Specifications...................................................................................................................3

4. How To Set The Unit .......................................................................................................................4

4.1 Control Panel..............................................................................................................................4

4.2 Main Function............................................................................................................................5

5. How To Set The Unit .....................................................................................................................10

5.1 Master/Slave Built In Preprogrammed Function.....................................................................10

5.2 Easy Controller ........................................................................................................................11

5.3 DMX Controller.......................................................................................................................11

5.4 DMX 512 Configuration..........................................................................................................12

5.5 DMX512 Connection...............................................................................................................13

6. Troubleshooting .............................................................................................................................14

7. Cleaning And Maintenance............................................................................................................15

1. Safety Instructions

yPlease keep this User Guide for future consultation. If you sell the fixture to another user, be

sure that they also receive this instruction booklet.

Cautions:

yAll fixtures are intact from the manufacturer, please operate follow up the user manual, artificial

fault are not under guarantee repair.

yUnpack and check carefully there is no transportation damage before using the fixture.

yBe sure that no ventilation slots are blocked, otherwise the fixture will be overheated.

yBefore operating, ensure that the voltage and frequency of power supply match the power

requirements of the fixture.

yUse in a dry location.

yIt’s important to ground the yellow/green conductor to earth in order to avoid electric shock.

yMaximum ambient temperature is 40℃. Don’t operate it where the temperature is higher than

this.

yFirst run, there will be smoke or smells, and all disappearing a few minutes later.

yMake sure there are no flammable materials close to the fixture while operating, as it is fire

hazard.

yLook over power wires carefully, replace immediately if there is any damage.

yFixture surface temperature may reach up to 65℃. Don’t touch the housing bare-hand during its

operation.

yNever run on for a long time lest shortening lifespan.

yDo not operate in dirty and dusty environment, also cleaning fixtures regularly.

yDo not allow children to operate the fixture.

yNever turn on and off the fixture time after time.

Please read the instructions carefully which includes important

information about the installation, operation and maintenance.

yThe housing, the lenses, or the ultraviolet filter must be replaced if they are visibly damaged.

yDo not open the fixture as there are no user serviceable parts inside. Never try to repair the

fixture by yourself. Repairs carried out by unskilled people can lead to damage or malfunction.

Please contact the nearest authorized technical assistance center.

yDisconnect the mains power if the fixture is not used for a long time.

2. Features

•Featuring 60W high powerful LED, one color wheel for creating

different saturated colors. Work as a Color Changer.

•Three Operation Modes: DMX, Master / Slave and Sound Active

DMX 512 Control Mode: 3 / 8 channels

•Great built-in lighting shows under Master / Slave mode triggered by music

•70~100% full range dimmer and variable strobe speed

•Optional easy controller CA-8 or CA-9 RTX for instant lighting shows at your fingers

•Two different angles selectable, 9° as standard and 14° as an accessory

•Ideal for restaurants, clubs, bars, discos, parties, mobile Djs and more

3. Technical Specifications

•Input Voltage：AC 230V, 50Hz

•Power Consumption: 95W

•Light Source: 1 ×60W LED

•Fuse: T 6.3A

•Dimension:268×266×233mm

•Weight:4.2kgs

For 230V 50Hz power supply, maximum fixtures that can be connected on one power cable is 7.

4. How To Set The Unit

4.1 Control Panel

1. Display

Show the various menus and the selected functions.

Button

2.MENU To select the programming functions

3.DOWN To go backward in the selected functions

4.UP To go forward in the selected functions

5.ENTER To confirm the selected functions

LED 6.DMX On DMX input present

7.MASTER On Master Mode

8.SOUND Flashing Sound activation

9.SLAVE On Slave Mode

10. Power in: Power connection to power source.

11. Safety hook: Used to connect safety cable to.

12. Microphone: Receive music for the sound active.

13. Only for wireless receiver: Connect with CA-9 RTX to control the unit for Stand by, Function

and Mode function.

14. DMX in: For DMX 512 link, use 3-pin XLR plug cable to input DMX signal.

15. DMX out: For DMX 512 link, use 3-pin XLR plug cable to link the next fixture.

16.Only for remote control: Connect with CA-8 to control the unit for Stand by, Function and

Mode function.

17. Power out: Connect to supply mains power for the next fixture.

4.2 Main Function

To select any of the given functions, press the MENU button up to when the required one is

showing on the display. Select the function by the ENTER button and the display will blink. Use

the DOWN and UP button to change the mode. Once the required mode has been selected, press

the ENTER button to setup or it will automatically return to the main functions without any change

after idling 8 seconds. To go back to the functions without any change press the MENU button. The

main functions are showing below:

DMX 512 Address Setting

Select the , press the ENTER button and the display will blink. Use the DOWN and UP

button to change the DMX512 address. Once the address has been selected, press the ENTER

button to setup or automatically return to the main functions without any change after 8 seconds. To

go back to the functions without any change press the MENU button again.

Channel Mode

Select the , press the ENTER button and the display will blink. Use the DOWN and UP

button to select the (3 channel) or (8 channel) mode. Once the channel mode has

been selected, press the ENTER button to setup, to go back to the functions without any change

press the MENU button again. Hold and press the MENU button about one second or wait for one

minute to exit the menu mode.

Slave Mode

Select the , press the ENTER button and the display will blink. Use the DOWN and UP

button to select the (normal) or (2 light show) mode. Once the mode has been

selected, press the ENTER button to setup, to go back to the functions without any change press

the MENU button again. Hold and press the MENU button about one second or wait for one

minute to exit the menu mode.

Split Color Mode

Select the , press the ENTER button and the display will blink. Use the DOWN and UP

button to select the (Split color mode) or (normal). Once the mode has been selected,

press the ENTER button to setup, to go back to the functions without any change press the MENU

button again. Hold and press the MENU button about one second or wait for one minute to exit the

menu mode.

Dimmer Calibrate

Select the , press the ENTER button and the display will blink. Use the DOWN and UP

button to calibrate the dimmer for a maximum output from (limited to 70% of the really

max. output) to (maximum output is not limited). Once the mode has been selected, press

the ENTER button to setup, to go back to the functions without any change press the MENU

button again. Hold and press the MENU button about one second or wait for one minute to exit the

menu mode.

Sound Mode

Select the is showing on the display. Pressing the ENTER button and the display will blink.

Use the DOWN and UP button to select the (sound on) or (sound off) mode. Once

the mode has been selected, press the ENTER button to setup or automatically return to the main

functions without any change after 8 seconds. To go back to the functions without any change press

the MENU button again.

Sound Sense

Select the , press the ENTER button and the display will blink. Use the DOWN and UP

button to adjust the sound sensitivity between and . Once selected, press the ENTER

button to setup, to go back to the functions without any change press the MENU button again. Hold

and press the MENU button about one second or wait for one minute to exit the menu mode.

Blackout Mode

Select the , press the ENTER button and the display will blink. Use the DOWN and UP

button to select the (yes blackout) or (no blackout) mode. Once selected, press the

ENTER button to setup or automatically return to the main functions without any change after 8

seconds. To go back to the functions without any change press the MENU button again.

LED Display

Select the , press the ENTER button and the display will blink. Use the DOWN and UP

button to select the (LED on) or (LED off). Once the mode has been selected, press

the ENTER button to setup or automatically return to the main functions without any change after

8 seconds. To go back to the functions without any change press the MENU button again.

Display Inversion

Select the , press the ENTER button and the display will blink. Use the DOWN and UP

button to select the (normal) or (display inversion). Once selected, press the

ENTER button to setup or automatically return to the main functions without any change after 8

seconds. To go back to the functions without any change press the MENU button again.

Auto Test

Select the , press the ENTER button and the fixture will run the built-in program to test the

fixture. To go back to the functions press the MENU button again.

Temperature Test

Select the , press the ENTER button and the display will show the temperature of the unit.

To go back to the functions press the MENU button again.

Fixture Hours

Select the , press the ENTER button and the display will show the number of working hours

of the unit. To go back to the functions press the MENU button again.

Software version

Select the , press the ENTER button and the display will show the version of software of the

unit. To go back to the functions press the MENU button again. Hold and press the MENU button

about one second or wait for one minute to exit the menu mode.

Inhaltsverzeichnis

Andere ACME Beleuchtungsausrüstung Handbücher

ACME

ACME BOOTES Bedienungsanleitung

ACME

ACME Ozone 3 Bedienungsanleitung

ACME

ACME Dotline180 Bedienungsanleitung

ACME

ACME DELUGE LED-WAV-50W Bedienungsanleitung

ACME

ACME Spider FC Bedienungsanleitung

ACME

ACME DAZZLED COLORLED-430 Bedienungsanleitung

ACME

ACME BF-1500ND B Bedienungsanleitung

ACME

ACME SABER HYBRID PRO Bedienungsanleitung

ACME

ACME iSolution Bedienungsanleitung

ACME

ACME Andromeda Bedienungsanleitung

ACME

ACME Glamour 350Z Bedienungsanleitung

ACME

ACME FLASHDOT Bedienungsanleitung

ACME

ACME GLAMOUR 700Z RGBY Bedienungsanleitung

ACME

ACME IP Cabin AR-01 Bedienungsanleitung

ACME

ACME LED Move 600SE Bedienungsanleitung

ACME

ACME ENERGY SPOT XA-400 SPOT Bedienungsanleitung

ACME

ACME TRACK 10 Bedienungsanleitung

ACME

ACME SAMURAI SCAN 50 Bedienungsanleitung

ACME

ACME Diabolo Bedienungsanleitung

ACME

ACME LP-1600 BD30 Bedienungsanleitung

ACME

ACME LED-0408 Bedienungsanleitung

ACME

ACME BW-54-10FC II RL Bedienungsanleitung

ACME

ACME Theatre Spot 150 Bedienungsanleitung

ACME

ACME V-BOX Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung

S&P

S&P PCRL80 Bedienungsanleitung