Agilent Technologies PlateLoc Bedienungsanleitung

Agilent Technologies

PlateLoc Thermal

Microplate Sealer

UserGuide

Notices

No part of this manual may be reproduced

in any form or by any means (including

electronic storage and retrieval or transla-

tion into a foreign language) without prior

agreement and written consent from Agi-

lent Technologies, Inc. as governed by

United States and international copyright

laws.

User Guide Part Number

G5402-90001

October/2006

Contact Information

Agilent Technologies Inc.

Automation Solutions

5301 Stevens Creek Blvd.

Santa Clara, CA 95051

USA

Technical Support: 1.800.979.4811

or +1.408.345.8011

[email protected]om

Customer Service: 1.866.428.9811

or +1.408.345.8356

[email protected]

European Service: +44 12081443513

euroservice.automation@agilent.com

Documentation feedback:

[email protected]

Web: http://www.agilent.com

Acknowledgements

Microsoft and Windows are registered

trademarks of the Microsoft Corporation in

the United States and other countries.

Warranty

The material contained in this docu-

ment is provided “as is,” and is sub-

ject to being changed, without notice,

in future editions. Further, to the max-

imum extent permitted by applicable

law, Agilent disclaims all warranties,

either express or implied, with regard

to this manual and any information

contained herein, including but not

limited to the implied warranties of

merchantability and fitness for a par-

ticular purpose. Agilent shall not be

liable for errors or for incidental or

consequential damages in connection

with the furnishing, use, or perfor-

mance of this document or of any

information contained herein. Should

Agilent and the user have a separate

written agreement with warranty

terms covering the material in this

document that conflict with these

terms, the warranty terms in the sep-

arate agreement shall control.

Technology Licenses

The hardware and/or software described in

this document are furnished under a

license and may be used or copied only in

accordance with the terms of such license.

Restricted Rights Legend

If software is for use in the performance of

a U.S. Government prime contract or sub-

contract, Software is delivered and

licensed as “Commercial computer soft-

ware” as defined in DFAR 252.227-7014

(June 1995), or as a “commercial item” as

defined in FAR 2.101(a) or as “Restricted

computer software” as defined in FAR

52.227-19 (June 1987) or any equivalent

agency regulation or contract clause. Use,

duplication or disclosure of Software is

subject to Agilent Technologies’ standard

commercial license terms, and non-DOD

Departments and Agencies of the U.S. Gov-

ernment will receive no greater than

Restricted Rights as defined in FAR 52.227-

19(c)(1-2) (June 1987). U.S. Government

users will receive no greater than Limited

Rights as defined in FAR 52.227-14

(June1987) or DFAR 252.227-7015 (b)(2)

(November 1995), as applicable in any

technical data.

Safety Noticies

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or the

like that, if not correctly performed or

adhered to, could result in personal

injury or death. Do not proceed

beyond a WARNING notice until the

indicated conditions are fully

understood and met.

A CAUTION notice denotes a hazard. It

calls attention to an operating procedure,

practice, or the like that, if not correctly

performed or adhered to, could result in

damage to the product or loss of important

data. Do not proceed beyond a CAUTION

notice until the indicated conditions are

fully understood and met.

Agilent Technologies, Inc., Automation Solutions, 5301 Stevens Creek Blvd., Santa Clara, CA 95051 USA

Letter to our Customers

Dear Customer,

The Agilent Technologies acquisition of Velocity11 resulted in the following

changes:

•Creation of Agilent Technologies Automation Solutions, formerly Velocity11

•Renaming of some Velocity11 products

•New Customer Service and Technical Support contact information

•New website address for product information

Please make a note of the following changes as they impact this user guide.

Velocity11 product name changes

New contact information

Documentation feedback: [email protected]

Technical Support: 1.800.979.4811 or +1.408.345.8011

[email protected]

Customer Service: 1.866.428.9811 or +1.408.345.8356

[email protected]

European Service: +44 12081443513

euroservice.aut[email protected]

Web: http://www.agilent.com

Velocity11 product name Changes to …

Access2 Automated Microplate

Loader

Automated Centrifuge Loader

Element Automation System BioCel 900 System

IWorks Device Driver Programming

Interface

VWorks DCL Interface

PlatePierce Seal Piercing Station Microplate Seal Piercer

VCode Barcode Print and Apply

Station

Microplate Barcode Labeler

Velocity11 Robot 3- Axis Robot

VHooks Integration Interface VWorks Hooks Interface

VPrep Pipetting System Vertical Pipetting Station

VSpin Microplate Centrifuge Microplate Centrifuge

VStack Labware Stacker Labware Stacker

Agilent Technologies

Contents

PlateLoc User Guide i

Contents

Preface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii

Who should read this guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv

What this guide covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v

What’s new in this user guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii

Accessing Velocity11 user information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii

Chapter 1. PlateLoc introduction. . . . . . . . . . . . . . . . . . . . . . . . . . 1

Description of the PlateLoc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Hardware overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Connection panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Plate requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Seal material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Lab automation system software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

PlateLoc workflows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Chapter 2. Unpacking and installation . . . . . . . . . . . . . . . . . . . 21

Installation workflow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Meeting Lab requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Unpacking the PlateLoc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Connecting the power source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Connecting and disconnecting the air source. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Connecting and disconnecting the argon source (Gas-Purging PlateLocs only) . . . . . 34

Connecting to the controlling computer (lab automation systems only) . . . . . . . . . . 37

Installing the PlateLoc ActiveX software (lab automation systems only) . . . . . . . . . . 38

Chapter 3. Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Turning on and turning off the power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Turning on and turning off the air . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Turning on and turning off the argon (Gas-Purging Platelocs only) . . . . . . . . . . . . . . 47

Tilting and stowing the touch screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Adjusting the touch screen contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Loading and unloading a roll of seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Creating and managing profiles (lab automation systems only) . . . . . . . . . . . . . . . . 59

Establishing communications with the PlateLoc (lab automation systems only) . . . . 62

Contents

PlateLoc User Guide

Chapter 4. Sealing plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Loading an insert and a plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Setting the sealing parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Starting the seal cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Stopping a seal cycle in progress . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Chapter 5. Optimizing seal quality. . . . . . . . . . . . . . . . . . . . . . . 77

Reasons for running optimization tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Optimization test guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Adjusting the sealing parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Chapter 6. Routine maintenance . . . . . . . . . . . . . . . . . . . . . . . . 83

Cleaning the hot plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Cleaning the touch screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Chapter 7. Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Hardware problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Error messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Diagnostic tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Reporting problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

Appendix A. Integrating the PlateLoc into third-party

systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

PlateLoc ActiveX control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

Integrating the PlateLoc ActiveX control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

Events. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112

Appendix B. Quick reference. . . . . . . . . . . . . . . . . . . . . . . . . . . 117

Touch screen menus and commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118

PlateLoc Diagnostics parameters and commands . . . . . . . . . . . . . . . . . . . . . . . . 120

Appendix C. Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123

Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125

iii

Preface

PlateLoc User Guide

Preface

This preface introduces the PlateLoc User Guide. This preface contains

the following topics:

❑“Who should read this guide” on page iv

❑“What this guide covers” on page v

❑“What’s new in this user guide” on page vii

❑“Accessing Velocity11 user information” on page viii

Preface

PlateLoc User Guide

Who should read this guide

Job roles This user guide is for people with the following job roles:

Related topics

Job role Responsibilities

Installer Someone who unpacks, puts together,

and tests the PlateLoc before it is used.

Lab manager, administrator, or

technician Someone who is responsible for:

❑Solving the more challenging

problems that might arise

❑Developing training materials and

standard operating procedures for

operators

Operator Someone who performs the daily

production work using the PlateLoc

and solves routine problems.

Your organizationmay choose to create

its own procedures for operators

including the procedures in this guide.

For more information about... See...

What this guide covers “What this guide covers” on page v

What’s new in this version “What’s new in this user guide” on

page vii

How to access different formats of

this user guide “Accessing Velocity11 userinformation”

on page viii

Preface

PlateLoc User Guide

What this guide covers

What is covered This guide covers the installation, setup, and operation of the PlateLoc

that is used in the following ways:

❑As a single device, controlled from the built-in touch screen

interface

❑Integrated withother devices in aVelocity11lab automation system,

controlled from a computer

This guide also provides the ActiveX reference information needed to

integrate the PlateLoc in a third-party lab automation system.

What is not covered This guide does not provide instructions for:

❑Creating protocols and setting task parameters in the Velocity11 lab

automation software

❑Operating other devices in Velocity11 lab automation systems

❑Operating the PlateLoc integrated into a third-party lab automation

system

Firmware version This guide documents PlateLoc firmware version 3.7.2.

Software version This guide documents PlateLoc ActiveX (PlateLoc.ocx) version 7.

Related guides The PlateLoc User Guide should be used in conjunction with the

following user documents:

❑Velocity11 lab automation system user guides, such as the BenchCel

User Guide and the BioCel User Guide.These user guides provide the

system setup requirements and user operation instructions.

❑Velocity11 lab automation system software user guides, such as the

VWorks User Guide. These user guides explain how to create

protocols and set task parameters for each device in the system.

❑Third-party lab automation system user documents. These

documents explain how to set up and use the third-party lab

automation system.

Preface

PlateLoc User Guide

Related topics For more information about... See...

Who should read this guide “Who should read this guide” on

page iv

What’s new in this version “What’s new in this user guide” on

page vii

How to access different formats of

this user guide “Accessing Velocity11 userinformation”

on page viii

Andere Handbücher für PlateLoc

Inhaltsverzeichnis

Andere Agilent Technologies Laborausrüstung Handbücher

Agilent Technologies

Agilent Technologies Agilent 33500 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies Labware MiniHub Bedienungsanleitung

Agilent Technologies

Agilent Technologies 1260 Infinity Bedienungsanleitung

Agilent Technologies

Agilent Technologies G1888 Bedienungsanleitung

Agilent Technologies

Agilent Technologies G7166A Bedienungsanleitung

Agilent Technologies

Agilent Technologies Magnis NGS Prep System Bedienungsanleitung

Agilent Technologies

Agilent Technologies 7693A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 7683 Bedienungsanleitung

Agilent Technologies

Agilent Technologies G1367A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 1200 series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 8453 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 1200 series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 1260 Infinity II Bedienungsanleitung

Agilent Technologies

Agilent Technologies 1147A Bedienungsanleitung

Agilent Technologies

Agilent Technologies Graphite Tube Atomizer GTA 120 Bedienungsanleitung

Agilent Technologies

Agilent Technologies Genomic DNA ScreenTape System Bedienungsanleitung

Agilent Technologies

Agilent Technologies NanoDis Bedienungsanleitung

Agilent Technologies

Agilent Technologies 8890 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5100 ICP-OES Bedienungsanleitung

Agilent Technologies

Agilent Technologies PR02 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 708-DS Installationsanleitung

Agilent Technologies

Agilent Technologies 53150A Bedienungsanleitung

Agilent Technologies

Agilent Technologies Archon Bedienungsanleitung

Agilent Technologies

Agilent Technologies InfinityLab LC Series Bedienungsanleitung

Beliebte Laborausrüstung Handbücher anderer Marken

Qiagen

Qiagen DML 3000 Bedienungsanleitung

Queensgate

Queensgate NANOSCAN OP400 Programmierhandbuch

Conviron

Conviron GEN1000-GE Bedienungsanleitung

Parr Instrument

Parr Instrument 4560 Bedienungsanleitung

IKA

IKA IC control Bedienungsanleitung

Integra

Integra DOSE IT Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Bedienungsanleitung

NI PXI-5422 Handbuch

Collomix

Collomix Aqix Bedienungsanleitung

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung

Ocean Insight

Ocean Insight FLAME-NIR+ Bedienungsanleitung

Parker

Parker ALIGN-MG-NA Bedienungsanleitung

BD 644787 Bedienungsanleitung

DENTAURUM

DENTAURUM Compact Megaplus Bedienungsanleitung

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Bedienungsanleitung

VWR

VWR SAS Super IAQ Bedienungsanleitung

illumina

illumina MiSeqDx Bedienungsanleitung

Yamato

Yamato BM510 Bedienungsanleitung