Assa Abloy SARGENT 1130-HU Series Bedienungsanleitung

A7673D 80-9311-0012-021 Rev 4 02/23

1130-HU Series Non-Handed Door Closer

Arm Model 1131-HU

Installation Instructions

Hold Open arm model, adjustable size 1-6 ( )

without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.

READ AND FOLLOW ALL INSTRUCTIONS.

SAVE THESE INSTRUCTIONS.

This product can expose you to lead which is known to the state of

California to cause cancer and birth defects or other reproductive harm.

For more information go to: www.P65warnings.ca.gov.

WARNING

Regular Arm Top Jamb Mount Parallel Arm

Optional Components

Right Hand Door - RH

Left Hand Reverse - LHR

Left Hand Door - LH

Right Hand Reverse - RHR

Right Hand Door - RH

Left Hand Reverse - LHR

Left Hand Door - LH

Right Hand Reverse - RHR

Right Hand Door - RH

Left Hand Reverse - LHR

Left Hand Door - LH

Right Hand Reverse - RHR

Tools Needed:

LEFT

HAND

DOOR

RIGHT

HAND

DOOR

Right Hand

Reverse

Left Hand

Reverse

To Determine Your Hand of Door: To Identify Your Model:

6-32 x 5/16" Pan Head

Self Tapping Screw

Pinion Cap

1/8" Hex Wrench

Screw Pack

(Refer to page 2 for a list of contents)

Closer

Arm Assembly

Main Arm

Pinion Screw

Set

Screw

Hold Open Arm

Dial Screw

Main Arm

60-0535

Cover

Spring Power

Adjustment

Date

Code

Size

Code

Included Components

Dial

Shoe

Legacy Friction Hold Open Arm

NOTE: Legacy FHO arm has installation

orientation.

Refer to document number

80-9300-0003-000 for details.

Soffit Adapter Plate

Used with Parallel Arm

Closers Only

BC Valve

Approved 2023-02-27

A7673D 80-9311-0012-021 Rev 4 02/23

the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.

1130-HU Series Hold Open Closer

yAlways consult door/frame manufacturer for fastener compatibility.

yDoor and frame must be properly reinforced.

yAdjust closing time speed between 3 and 7 seconds from 90° to 0°.

yThese door closers should NOT be installed on exposed side

(weather side) of exterior doors.

yDimensions are given in inches (millimeters).

Closer Adjustments

Do not over

tighten cap or

cover screws.

Pinion Cap or Cover

Top Jamb Mount

Parallel Arm

ATTENTION:

An incorrectly installed or improperly adjusted door closer can cause

property damage or personal injury. These installation instructions

should be followed to avoid the possibility of misapplication or

misadjustment.

yFor special applications, a separate door and frame preparation

template is packed with these instructions. Use this instruction

sheet for installation sequence and closer adjustments only.

yDoors should be hung on ball bearing or anti-friction hinges.

yA separate door stop is recommended.

Latch Backcheck

Use provided hex wrench to turn valves. NEVER force valves out of closer. NEVER completely close backcheck valve.

Door must be open to adjust spring closing power. Refer to the chart.

Use of a power drill will void the Warranty.

Sweep

Slower

Faster

Slower

Faster

Slower

Faster

Regular Arm

Supplied Hardware

Mounting Hardware Door or Frame Drill

Closer, Holder Shoe, Holder, PA Bracket:

1/4-14 x 1-1/2 Oval Flat Head Self Drilling. Screw Wood/Metal 3/16" (4.8mm) for wood

Closer, Holder Shoe, Holder, PA Bracket:

1/4-20 x 3/4 Oval Flat Head Mach. Screw Metal Drill #7 (.201 dia. or 5.1mm)

Tap 1/4-20

H/O Shoe to Holder, PA Bracket:

1/4-20 x 1/2 Oval Flat Head Mach. Screw All N/A

Closer:

Sleeve Nut and Bolt (SNB) (optional)

with 1/4-20 x 3/4 Oval Flat Head Mach. Screw

(recommended)

Hollow Metal 9/32" (7.0mm) thru

3/8" (9.5mm) door face opposite to closer

Aluminum or Wood 3/8" (9.5mm) thru

Closer:

Thru Bolt and Grommet Nut (TBGN) (optional) All

9/32" (7.0mm) thru

3/8" (9.5mm) dia. x 3/8" (9.5mm) deep, door face

opposite to closer

Spring Closing Power Number of Turns Required

Door

Type of

Installation *

Maximum Door Size

34"

(0.85M)

36”

(0.90M)

40"

(1.00M)

44"

(1.10M)

48"

(1.20M)

1131

Interior

Regular Arm

Top Jamb

Full 360° Turns

2 4 6 10 12

Parallel Arm 3 5 8 11 14

Exterior

Regular Arm

Top Jamb 3 5 8 11 14

Parallel Arm 5 8 11 16 19

*30 Full (360°) turns maximum available = turns as shipped

Approved 2023-02-27

A7673D 80-9311-0012-021 Rev 4 02/23

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 3

1130-HU Series Hold Open Closer

Flat

2. Mount closer to door.

4. Connect arms, preload spring, and

tighten set screw.

5. Set Hold Open.

90° min - 180°

The 1130-HU Hold Open Closer - Regular Arm has now been installed.

🛑

Go to page 2 for closer adjustments and decorative cap or cover installation.

RH and LH:

Position flat at S

1st

2nd

RH:

Clockwise

to tighten.

3. Remove dial from Hold Open arm and install separate arms.

1. Prepare door and frame.

Opening Dimension “A”

to 100° 7 (178)

101° to 120° 6 (152)

*121° to 180° 3-1/2 (89)

*Door/Wall/Hardware/Jamb conditions permitting

1130-HU Regular Arm Installation (Right Hand Shown)

1-1/4

(32)

(152) 1-3/4

(44)

3/4

(19) 9-1/16

(230)

7/8

(22)

1st

2nd

Dial DOWN

Left and Right Hand

90°

1st

2nd 3rd

3rd

1st

3rd

90° min - 180°

2nd

LH:

Counterclockwise

to tighten.

Keep door open in position until

dial screw secures dial.

Rotate elbow until Hold

Open arm is perpendicular

to frame.

Rotating arm

preloads closer

spring power.

Approved 2023-02-27

A7673D 80-9311-0012-021 Rev 4 02/23

the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.

1130-HU Series Hold Open Closer

90°

2. Mount closer to frame.

The 1130-HU Hold Open Closer - Top Jamb Mount has now been installed.

🛑

Go to page 2 for closer adjustments and decorative cap or cover installation.

3. Remove dial from Hold Open arm and install separate arms.

4. Connect arms, preload spring, and

tighten set screw.

1st

2nd

1130-HU Top Jamb Arm Installation (Right Hand Shown)

1. Prepare door and frame. Opening Dimension “A”

to 100° 7-1/2 (191)

101° to 120° 6 (152)

*121° to 180° 3-1/2 (89)

*Door/Wall/Hardware/Jamb conditions permitting

9-1/16

(230) 3/4

(19)

Top of

Door

1-1/2

(38)

1-3/4

(44)

(152)

1/2

(13)

A longer connecting rod

is required for reveals

greater than 3" (76mm)

Reveal

Flat

RH and LH:

Position flat at S

1st 2nd

Dial DOWN

Left and

Right Hand

3rd

Rotate elbow until Hold

Open arm is perpendicular

to frame.

Rotating arm

preloads closer

spring power.

5. Set Hold Open.

70° - 180°

1st

2nd

RH:

Clockwise

to tighten.

3rd

1st

3rd

70° - 180°

2nd

LH:

Counterclockwise

to tighten.

Keep door open in position until

dial screw secures dial.

Approved 2023-02-27

A7673D 80-9311-0012-021 Rev 4 02/23

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 5

1130-HU Series Hold Open Closer

2. Close latch and sweep valves. 3. Remove dial from

Hold Open arm.

4. Install soffit plate and

mount closer.

5. Install Hold Open arm to plate.

IMPORTANT

1130-HU Parallel Arm Installation (Right Hand Shown)

1. Prepare door and frame.

9-1/16

(230)

3/4

(19)

Top of

Door

3-1/4

(83)

1/2

(13)

7/16

(11)

2-3/4

(70)

(50)

3/8

(10)

Frame

Door

Opening

Dimension

“A”

Dimension

“B”

to 100° 9-1/4 (235) 7-5/8 (194)

101° to 130° 7-3/4 (197) 6-1/8 (156)

*131° to 180° 5-3/4 (146) 4-1/8 (105)

*Door/Wall/Hardware/Jamb conditions permitting

6. Place main arm on closer spindle and rotate.

Approved 2023-02-27

A7673D 80-9311-0012-021 Rev 4 02/23

ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.

1-800-727-5477 • www.sargentlock.com

Attention Installer: Improper installation

may result in damage to the product and

void the factory warranty.

WARNINGWARNING

This product can expose you to lead which is known to the state of California to

cause cancer and birth defects or other reproductive harm. For more information

go to www.P65warnings.ca.gov.

1130-HU Parallel Arm Installation (Right Hand Shown) cont.

7. Remove arm and attach as shown.

Do not completely

open valves. Valves

will leak.

Arm under tension.

Keep fingers away

from moving parts.

8. Open latch and sweep valves.

1st

2nd

Left Hand

Door

Right Hand

Door

Flat

RH: Position flat at R

LH: Position flat at L

1st

2nd

9. Connect arms, preload spring, and

tighten set screw.

4th

By hand, rotate

arm elbow to

be 1-1/2" from

door face.

Rotating arm

preloads closer

spring power.

3rd

The 1130-HU Hold Open Closer - Parallel Arm Mount has now been installed.

🛑

Go to page 2 for closer adjustments and decorative cap or cover installation.

1-1/2

(38)

5th

70° - 180°

1st

RH:

Clockwise

to tighten.

3rd

1st

3rd

70° - 180°

LH: Counterclockwise

to tighten.

Keep door open in position until

dial screw secures dial.

10. Set Hold Open.

2nd 2nd

Approved 2023-02-27

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Assa Abloy Türöffnungssystem Handbücher

Assa Abloy

Assa Abloy Norton 8000 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 7500H Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED5800 Series Bedienungsanleitung

Assa Abloy

Assa Abloy G-CO-FMS Bedienungsanleitung

Assa Abloy

Assa Abloy NORTON RIXSON 5200 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 8000H Series Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 5700 Series Kurzanleitung

Assa Abloy

Assa Abloy Besam SL500 Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT FIREGUARD 12-2468 Bedienungsanleitung

Assa Abloy

Assa Abloy NORTON RIXSON 1600H Series Bedienungsanleitung

Assa Abloy

Assa Abloy RIXSON W50 Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 6011 Series Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 351 POWERGLIDE Series Bedienungsanleitung

Assa Abloy

Assa Abloy Rixson Smok-Chek VI Kurzanleitung

Assa Abloy

Assa Abloy DC 700G-FT BGS Bedienungsanleitung

Assa Abloy

Assa Abloy DC700G-FT Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 6300 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Norton LEO 5700 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 6300 Series Kurzanleitung

Assa Abloy

Assa Abloy effeff ePED 1386Z1LB7 04S0 Series Referenzhandbuch

Assa Abloy

Assa Abloy CloserPlus Ramp Norton XF460 Bedienungsanleitung

Assa Abloy

Assa Abloy NORTON RIXSON 6200 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 78-B/FHA Hold Open Series Bedienungsanleitung

Assa Abloy

Assa Abloy Besam SW300 Bedienungsanleitung

Beliebte Türöffnungssystem Handbücher anderer Marken

Pamex

Pamex KT-INP35 Bedienungsanleitung

Cal-Royal

Cal-Royal N-F77CVR Bedienungsanleitung

Scrigno

Scrigno OPEN1000 Bedienungsanleitung

TriMark

TriMark UM 34 Bedienungsanleitung

BFT

BFT WIND RMB 130B 200 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Besam

Besam Swingmaster MP Leitfaden

CRL

CRL SENIOR PRIMA Bedienungsanleitung

GAL

GAL MOVFR Technisches Datenblatt

Normstahl

Normstahl IDO7 Bedienungsanleitung

Häfele

Häfele Finetta T 70 VF Bedienungsanleitung

AGS

AGS D-PL Handbuch

Stanley

Stanley MA900ñ Montageanleitung

WITTUR

WITTUR Hydra Plus UD300 Handbuch

Alutech

Alutech TR-3019-230E-ICU Montage- und Bedienungsanleitung

MPC

MPC ATD ACTUATOR 50 ATD-313186 Operating and Technisches Datenblatt

GEZE

GEZE ECturn Bedienungsanleitung

Chamberlain

Chamberlain T Bedienungsanleitung